The Da-Lite 28853V Parallax 40.5x95" Projection Screenfrom Da-Lite 28853V Parallax 40.5x95" Projection Screenfeatures a special fabric that mimics the screen of a television. This darker surface is designed for maximum glare rejection, allowing the projector to be used in environments with elevated levels of ambient light. Its multi-layered design helps reject light coming from above so that only the image from the projector gets reflected.

103" Diagonal / 2.35:1 Aspect Ratio    Parallax 0.8 Screen Surface    0.8 Gain / 170° Viewing Angle    Television-Like Low-Glare Surface    Micro Layers Block and Absorb Light    Ideal for More than 1.5:1 Throw Ratios    For Wall Mounting

Parallax is an ambient-light-rejecting technology featuring a micro-layered optical lens system that rejects light. This technology mimics the look of a television when it is on and when it is off, but without the glare from windows or lighting fixtures. With a 170° horizontal viewing angle, 34° vertical viewing angle, and 0.8 gain, the surface is ideal for applications in professional A/V

Note: For projectors with less than 1.5:1 throw ratio, please use the Parallax UST 0.45 surface instead

Pro-Trim is a fabric covering that enhances the appearance of the installation. Pro-Trim provides a stylish masked border while absorbing the light that surrounds the viewing area

Related Questions and Answers

Q: 1. How low can the bottom of the viewable screen be from the floor level?

A: About 8" off the floor is the lowest height setting.

Q: 2. does it have a time lapse feature?

A: Yes it does, this system comes with six Shutter Link Cables for select cameras. The shutter link cables are there to control the shutter on a camera for a time lapse.

Q: 3. Does this unit support the Godox QT 600 Mark 2 (not mark 3)? QT Mark 2 has a long modelling bulb.

A: It would seem the Godox BFP Flash Projection Attachment for Bowens could possibly support the Godox QT600IIM Flash Head due to the depth inside the Projection Attachment being just about 6 inches deep. Since this Projection Attachment was meant to be used with LED lights it would be advisable to simply remove the modeling lamp so as to maximize the brightness of the projection. This would also guarantee that it would fit on the light.

Q: 4. Does this slider really support up to 22lbs of load?

A: Manufacture lists this product supports up to 10kg (22 lbs).

Q: 5. Can it be used with a bowens mount adapter?

A: This projector is designed to work with a Dedolight. It will not work with a Bowens mount.

Q: 6. Would this work well on a Profoto B10 light with a bowens to Profoto adapter?

A: Godox BFP Flash Projection Attachment for Bowens will work with the GTX STUDIO Bowens to Profoto Flash Head Adapter.

Q: 7. Does the N1 or N3 cable will work with Nikon D7500? Thank you.

A: the manufacturer does not list the D7500 but the closest camera to that model is the D7100 and that uses the N3 type cable

Q: 8. Will the gobo and iris slot accept standard B gobo holders and irises for an ETC Source 4?

A: No, the Arri Orbiter 25º Projection Optics is not interchangeable with gobo holders or irises used on the ETC Source 4 Ellipsoidal.

Q: 9. Can this be used upside down, for overhead tabletop shots?

A: This product was not designed with overhead shots in mind. It may still work for such a set up, but you would need to customize a solution to operate it in such a way. So that we may best assist you finding the proper product for your needs feel free to email us directly at askbh@bhphoto.com.

Q: 10. What is the weight-bearing capacity for this slider?

A: It is our opinion that the sliders weight capacity is approximately 8 lbs / 3.6 kg.