The white Ceiling Microphone Array Kit (Mini-Phoenix Breakout) from ClearOne is an array of three cardioid condenser microphones designed to provide 360-degree coverage of sources in convention and learning centers, meeting rooms, conference rooms, and more. The array features an RJ45 output and includes an RJ45 to mini-Phoenix adapter for connection to ClearOne CONVERGE Pro and INTERACT Pro mixers.

The cardioid polar pattern of each mic yields a null point behind the mic, which minimizes noise pickup from the ceiling. The 100 Hz to 12 kHz frequency response reduces low-frequency rumble and high-frequency hiss, and is well-suited for capturing speaking voices. The array is RF hardened and shielded to protect against noise interference.

Multiple cables are supplied, including 12" and 24” mini-XLR, 4-pin, drop-down cables, plus a 25’ RJ45 Cat5e cable. Phantom power is required for operation of the Ceiling Microphone Array.

For Meeting and Conference Rooms    Three Cardioid Condenser Microphones    360-Degree Coverage    Minimizes Pickup from Ceiling Sources    100 Hz to 12 kHz Frequency Response    RF Hardened and Shielded    RJ45 Output    Includes RJ45 to Mini-Phoenix Adapter    Includes Multiple Cables    Phantom Powered

• Designed for use with ClearOne CONVERGE Pro and INTERACT Pro mixers
• Connect multiple mic arrays to any ClearOne mixer
• For convention and learning centers, and meeting, training, and conference rooms
• Three cardioid condenser microphones in a single array provide 360-degree coverage and minimize noise pickup from ceiling sources
• 100 Hz to 12 kHz frequency response reduces low-frequency rumble and high-frequency hiss
• Run Cat5e Ethernet cable from array output to mixer
• RF hardened and shielded to decrease interface
• Compact and unobtrusive
• Includes 12" and 24" mini-XLR, 4-pin, drop-down cables, 25' RJ45 Cat5e cable, and an RJ45 to mini-Phoenix adapter
• Requires 12 to 52 VDC phantom power

Related Questions and Answers

Q: 1. Can it work properly with Tely Labs telyHD Pro?

A: The Chat 150 architecture is quite open. Basically if these systems have a USB connection and can recognize a 3rd party peripheral (within the GUI) in order to by-pass their audio and direct it to the Chat..then yes.

Q: 2. how do you address speaking internally and being able to hear from across the room? will the mics pick up the conversations both internally and externally through the ceiling mics and speakers without an echo?

A: The Sennheiser In-Ceiling Audio Conferencing Solution Kit with Mic Array, Processor, Amp & SpeakerBH #SEUSTCC2KITK (B&H Kit) will pick-up speech at a distance very nicely. Echo and noise cancellation technlogies are built into the system. Per Sennheiser: "Thanks to the patented dynamic beamforming technology, you will now experience meetings and conferences that are as flexible as you are: A single TeamConnect Ceiling 2 captures your voice easily within a radius of up to 60 sqm - no matter what you do in the room. And once TeamConnect Ceiling 2 is installed, you will never have to worry about further configuration again."

Q: 3. Can we use a 4 pin mini-xlr to 3 pin XLR and plug it into a standard audio console? Wouldn't that work?

A: It would be best to stay with the enclosed rj45 to xlr male connections. These provide the ability the run long cable runs, and ensures powering of each capsule is done properly.

Q: 4. How large of an area can one of these pick up people speaking?

A: Per Sennheiser: "Thanks to the patented dynamic beamforming technology, you will now experience meetings and conferences that are as flexible as you are: A single TeamConnect Ceiling 2 captures your voice easily within a radius of up to 60 sqm – no matter what you do in the room. And once TeamConnect Ceiling 2 is installed, you will never have to worry about further configuration again."

Q: 5. How is the power supply connected to the speaker? How long is the power supply lead

A: Hi, Thank you for reaching out. Power supply connected to the Bluetooth controller and Each light requires a 120v supply. The sound system is powered through a control module that also requires a separate 120v power supply.

Q: 6. does this work with the clearone chat 170s?

A: This can also be used for the Chat 170 units.

Q: 7. Thinking of getting a couple of these to add to my 5.1 home theater setup to create a 5.1.2 for Dolby Atmos. Will these be a good speaker for this?

A: Yes, these should work fine as Atmos effect speakers.

Q: 8. What would be required to get a XLR audio output from this system? I currently have a qu32 with 18 + desk mics going into it. Is it feasable to get rid of the desktop gooseneck mics and use this system for audio input to the mixing board?

A: The Sennheiser TeamConnect SL Ceiling 2 Microphone Array with Extension Brackets BH #SEUSTCC2KTK will connect directly to external microphones. Please see the manual below for connection options and installation guidance: https://www.bhphotovideo.com/lit_files/762696.pdf

Q: 9. Can this be used with a conventional analog audio mixer. Phoenix connector to three inputs on the mixer?

A: Unfortunately it cannot. It comes with an RJ45 output and includes an RJ45 to XLR male adapter for connection to ClearOne INTERACT AT mixers.

Q: 10. Have noise cancellation?

A: The Sennheiser TeamConnect SL Ceiling 2 Microphone Array BH #SESLCEILMIC2 does not offer active noise cancellation but it does focuse on whoever Is speaking.