Turn your IP-based MediaCento IPX transmitters and receivers into an IP-based matrix switch and video wall controller. Add the MediaCento IPX Controller to the system and get IP-based matrix switching and video wall control. Flexible matrix switching and video wall control The MedaCento IPX controller brings cost-effective flexible matrix switching and video wall control to a new level. The controller appliance enables customers to take full control over the IP-based MediaCento IPX transmitters and receivers and turns the system into an IP-based matrix switch and video wall controller. Plug-and-play setup Setup is easy. Plug the device into the network of the MediaCento units and the device automatically detects any MediaCento units in the network. Pull them into the Web interface for easy control. Two Ethernet interfaces for control from secondary network If the AV signals are on a separate network the MediaCento IPX control has two Ethernet ports that allow control from a secondary network. Run the AV signals on one network to prevent overloading the corporate network and simultaneously control the units from you cell phone or office computer on the corporate net. Intuitive Web UI for remote content management The embedded appliance includes a Web interface which allows you to switch from any source to any display create presets and groups create multi-zone layouts combine multiple receivers into a video wall and control and switch video wall zones remotely. No port limitations The IP-based system does not have any port limitations and can potentially support hundreds of devices and video walls up to 8 x 8 in size. Mobile support The system also features mobile support which allows for easy access and monitoring of presets from cell phones or tablet devices. This product is covered by one of more of the following United States Patent Nos. 7457250 8155012 8902760 8942107 and/or 9049019.

• Take full control over your IP-based MediaCento IPX transmitters and receivers
• Manage content remotely with intuitive Web UI and mobile support
• Control video walls up to 8 x 8 (64 screens)
• Easily expandable

Related Questions and Answers

Q: 1. so example this will play blue-ray player with example 3 tv or 3 monitors hooked up in the input device and play it out of the 3 outputs I want to know before I buy if these are not splitters?

A: This Smart-AVI product is both a Video Wall Controller and a Matrix Switcher. A Matrix Switcher allows you to send any input to any output. This has 4 inputs and 4 outputs. You can set it to have 1 input go to all 4 outputs or every input to go to a different output.

Q: 2. Does this unit come withe the flange and cover kit as shown in the picture, or only the box?

A: The Flange and Cover are not included. Instead you would need B&H # CHPAC525FC which is the same box with the Flange and Cover included. https://bhpho.to/2YZRg0u

Q: 3. Can this be charged and/or powered via the USB-C port on the device?

A: The Tilta Wireless Controller for Mirage Matte Box USB-C port at this moment is only used for firmware updates.

Q: 4. Can you display 4 different outputs? Like watch 4 different football games on each tv.

A: No, The BZBGear 2x2 4K60 HDMI Video Wall Controller with Audio has only one input and would only support one input signal. However, This HDMI 4 x 4 would allow you to have 4 input sources and be able to output to 4 Televisions. MuxLab 4x4 4K60 HDMI Matrix Switch BH #MU100508 https://bhpho.to/3GxJoM9

Q: 5. Can this unit be used to rotate and scale a 16:9 feed to be presented as 9:16? Basically rotating 90 degrees and scaling to show full image as center slice on screen? Can it be done using only controls on the unit, without connection to a computer?

A: According to the manufacturer, the A-Neuvideo HDMI Video Wall Rotation Processor can rotate images in 90 degrees and many other increments, and scale for use, ideal for a unique video wall installation. Controls can be adjusted from the buttons on the front, from software and through RS 232.

Q: 6. For which brand mixer or ampllifer this controller suits? Hope its not an universal controller. So please send me the Amplifier

A: The AtlasIED Atmosphere C-ZSV Zone, Source, and Volume Wall Controller (Black), BH # ATCZSVUSB, is designed to work with AtlasIED components. See examples below: AtlasIED Atmosphere 4-Zone Audio Processor (B&H # ATAZM4) AtlasIED Atmosphere AZM8 8-Zone Audio Processor (B&H # ATAZM8) AtlasIED Atmosphere 400W Networkable 4-Channel Power Amplifier (B&H # ATAZA404) AtlasIED Atmosphere 800W Networkable 4-Channel Power Amplifier (B&H # ATAZA804)

Q: 7. Would this work with the LG GX series OLEDs? In other words, is it completely flush and would allow for the tv to be completely flat against the wall?

A: Yes, you should have no issues as long as its installed correctly.

Q: 8. Is this compatible with B&H # HID2143G0I28 MFR # DS-2CD2143G0-I 2.8MM?

A: Yes this is the correct wall mount for this camera, you will need the pendant cap to secure the camera to the wall mount. The model of the pendant cap for this unit is the PC110.

Q: 9. What is the connector to the X4 unit called?

A: It is a proprietary connector un-named by the manufacturer.

Q: 10. Can you set any type of screen configuration, i.e., like a 1x4 screen set up or does it have to be 2x2. Can you get creative and set on screen up vertically and three horizontal and have one image across all 4?

A: This Smart-AVI is purely for 2x2. For 1x4 you'll need a controller like this: http://bhpho.to/1SIGky8