Brighteye Nxt 450 Router With H.264 Encoder/Decoder

Brighteye Nxt 450 Router With H.264 Encoder/decoder

Product Code: eq31442
Availability: In Stock

$27,075.00 $37,092.75

Qty

10 reviews Write a review

Description
Reviews (10)

The BrightEye NXT 450 Router with H.264 Encoder/Decoderfrom BrightEye NXT 450 Router with H.264 Encoder/Decoderadds a high quality, high profile H.264 (MPEG-4) encoder to the BrightEye NXT family of compact routers. The Encoder produces both a high and low resolution output simultaneously. Any SDI input can be fed to the encoder through the built-in format converting Clean Switch, allowing seamless switching or mixing between all inputs. The independent decoder operates simultaneously, with baseband output in any desired format. The decoder output can be switched along with any other source to any destination. An NXT 450 can serve as a full duplex codec, supporting both an outgoing and incoming streaming path. Encoding and decoding are fully integrated with the full set of resources in the NXT 450.

Encoded streams can be sent or received through IP networking or by direct DVB-ASI connections. The NXT 450 incorporates an RJ-45 Gigabit Ethernet port dedicated to streaming connectivity. The encoder output can be delivered by either unicast or multicast addressing modes over the IP connection. Two unicast outputs can be independently directed to any desired destination. The multicast output is limited to the immediate subnet that the NXT 450 is connected to, but can be received by multiple devices. In addition to IP outputs, a DVB-ASI formatted stream can be output through a BNC port, or by fiber with an SFP module. For each of these outputs, IP or ASI, there is independent selection of the high or low resolution stream. The NXT 450 can receive an IP stream from the media port, or ASI from any BNC or fiber input. This stream will be decoded to produce a baseband SDI signal with embedded audio.

Parameters
Encoder	Dual Rate: MPEG-4 Part 10 H.264 (ISO/IEC 14496/10) Hi-Res: Encoding format matches input source Lo-Res: Encoding format 640 × 360p Bit Rate: Adjustable from 1 to 20 Mb/s
Profile	Hi-Res: Main and High Lo-Res: Baseline, Main, and High
Level	Hi Res: 3 to 4.2 Lo-Res: 1.2 to 4.2
SDI	Input Number: 2 to 9, configurable, BNC and SFP Signal Type: 270 Mb/s SD SDI SMPTE 259M 1.485 Gb/s HD SDI SMPTE 274M, 292M, 296M 2.97 Gb/s HD SDI SMPTE 424M, 425M Impedance: 75 Ohms Return Loss: >15 dB Max Cable Length: 984' (300 m) for 270 Mb/s; 328' (100 m) for 1.485 Gb/s Automatic input cable equalization Output Number: 2 to 9, configurable, BNC and SFP Type: 270 Mb/s SD SDI SMPTE 259M 1.485 Gb/s HD SDI SMPTE 274M, 292M, 296M 2.97 Gb/s HD SDI SMPTE 424M, 425M Processing: 12- and 16-bit Impedance: 75 Ohms Return Loss: >15 dB Max Cable Length: 328' (100 m) for HD; 984' (300 m) for SD (Belden 1694A)
Audio	2 channels MP3 and AAC encoding Bit Rate: 32 to 384 kb/s Downmixing: Up to 16 incoming channels to stereo pair; user selectable
Reference Input	Number: One Type: 1 Vpp composite video, PAL or NTSC or Tri-level sync Impedance: 75 Ohms Return Loss: >40 dB
HDMI Input & Output	2 x Input 2 x Output
Standards	1080i 50, 59.94 or 60 Hz SMPTE 274M -4,5,6 720p 50, 59.94 or 60 Hz SMPTE 296M -1,2,3 1080p 23.98, 24 or 25 Hz, SMPTE 274M -9,10,11 1080p 50, 59.94, 60 Hz, SMPTE 424M, 425M, Level A 1080sF 23.98, 24 or 25 Hz, RP211 -14,15,16 625i 50, 525i 59.94, SMPTE 259M
Fiber I/O	4 x Input 4 x Output
Streaming	Outputs: 2 x Independent unicast streams; selectable Hi-Res or Lo-Res encoding 1 x Multicast stream; selectable Hi-Res or Lo-Res encoding DVB-ASI Stream: Selectable Hi-Res or Lo-Res routable to any output connector
Decoder	Decode from unicast, multicast or DVB-ASI MPEG-4 part 10 H.264 (ISO/IEC 14496/10) MPEG-2 (ISO/IEC 13818-2)
Output	Decoder Baseband: Resolution: User selectable; HD-SDI Routable to any destination Can be sent to cleanswitch for synchronization and glitch-free switching
Latency	Total End-to-End: 750 msec (encode/decode)
Network Connection	Control Port: RJ-45; 10/100 Media Port: RJ-45; 10/100/1000
Power	12 V, 35 W (100 to 230 VAC modular power supply)
Ambient Temperature	32 to 104°F (0 to 40°C)
Relative Humidity	0 to 95%, non-condensing
Altitude	0 to 10,000' (0 to 3048 m)
Dimensions	5.6 x 1.7 x 6.8" (14.3 x 4.2 x 17.2 cm) including connectors and flange
Weight	1.75 lb (0.79 kg)
Packaging Info
Package Weight	2.145 lb
Box Dimensions (LxWxH)	8.7 x 7.9 x 2.5"

Flexible I/O configuration allows on-the-fly changes to the number of inputs and router destinations. From 9 inputs and 2 outputs, to 2 inputs and 9 outputs, the NXT 450 adapts to different needs. The two SFP ports allow for fiber optic connections, HDMI I/O, or additional HD-BNC SDI connections. You can genlock the Clean Switches and TSGs using the external reference input or assign a Clean Switch to an output. The encoder is driven as a destination of the routing matrix, and the output of the decoder is a source to the matrix. You can feed any source to the encoder, and feed the decoder to any destination.

The NXT 450 contains two Clean Switches. When assigned to an output, they provide clean, quiet switching, even between asynchronous sources. The format conversion feature provides automatic conversion of inputs to the chosen output format. This makes it possible to cut and mix between different input formats. Frame synchronization in the Clean Switch is particularly valuable when assigned to the input of the encoder. It guarantees that the encoder receives continuous, uninterrupted synchronization, regardless of the timing or condition of the input signals.

Control and configuration of the NXT 450 can be made from a variety of interfaces. The front panel provides a full motion, real time video display of sources and destinations. You can route signals and configure resources directly from the front panel or connect the RJ-45 control network port to a LAN, for control using the built-in web server. From smartphone, tablet, or laptop, you can view thumbnails of all the sources and destinations, make routing changes, and configure parameters of all the NXT 450 resources. Control from third-party devices can be accomplished by TCP/IP or RS-232 protocols. Or you can use the 5835 Control Panel to provide a fully customizable operator interface.

Router for 3G, HD, SD SDI, fiber and HDMI video
Simultaneous high quality, high profile MPEG encoder/decoder
Advanced H.264 coding techniques give good performance at low bit rates
Built-in dual up/down/cross converters
Dual assignable clean switches for video and embedded audio for seamless routing
LCD display with realtime full motion video of your sources
Dissolve and Cut transitions
Direct Take mode
Audio breakaway
16-channel audio level adjustments
Mix and shuffle audio
System-wide configuration registers
Programmable Salvo and Action Keys
Front panel and web-based control
Dual built-in test pattern generator with moving element option and slate ID
PiP-Efx – Picture in Picture option

Mobile trucks
House of worship
Rental and staging market

Related Questions and Answers

Q: 1. Is there a certain type of SD card or USB thumb drive that works best with this machine for recording audio and video?

A: The Datavideo H.264 Dual Streaming Encoder/Recorder has no recording with the USB, it is for Firmware updates only. The SD card Does not need to be UHS-II.

Q: 2. Can this product stream 3 streams simultaneously WITH EACH STREAM HAVING A DIFFERENT BITRATE?

A: Yes it can. Each output stream can be configured independently on the UI of the Osprey Talon G2 H.264 Encoder.

Q: 3. Is there DYNDNS support?

A: Yes, the AVMATRIX SE1217 H.265/264 HDMI Streaming Encoder does support DYNDNS.

Q: 4. Can this also be used as a Decoder? The LAN example has an avmatrix decoder pic, do no info.

A: No, the AVMATRIX H.264/H.265 SDI Streaming Encoder is not bi-directional. It can not be used as a decoder.

Q: 5. Will this work with Zoom, YouTube and Facebook?

A: The AVMATRIX SE1217 H.265/264 HDMI Streaming Encoder is compatible with RTMP and RTMPS streaming protocols which are used by Zoom, YouTube and Facebook for streaming.

Q: 6. Will the encoder work as an NDI source?

A: No, the AVMATRIX H.264/H.265 SDI Streaming Encoder has no NDI encoding built into it whatsoever.

Q: 7. will this simply do just a horizontal flip to a video feed? the use case is Sony A7S3 HDMI out SE1217 Input (flips the image horizontally) - outputs 1080p 30p to a blackmagic atem mini?

A: Yes. The AVMATRIX SE1217 is capable of doing a horizontal image flip.

Q: 8. I would like to stream an HDMI source over a local network to a smart TV and computer. Will this stream in HLS, be available to multiple devices on my LAN, and be playable in a standard browser with no additional decoding software or hardware? Thanks in advance!

A: The AVMATRIX SE1217 H.265/264 HDMI Streaming Encoder does provide HTTP(HLS) protocol. The following protocols are provided in the device for streaming applications and decoders: RTMP/HTTP/RTSP/UNICAST/MULTICAST/RTP/SRT

Q: 9. Can this receive a YouTube Live stream and decode it?

A: This will not be able to decode a Youtube Live Stream. This is meant to work with an encoder like the Osprey Talon G2 H.264 Encoder, BH #OSTG2ENC.

Q: 10. is there a power supply for the Power Connector 1 x Barrel (12 VDC at 2 A) Input or would I need to purchase one? if so then a link to a power supply would be great

A: The AVMATRIX SE1217 comes with an included AC power supply. In the Box AVMATRIX SE1217 H.265/264 HDMI Streaming Encoder AC Power Supply Limited 3-Year Warranty

Grant	21/09/2024
[2.145 lb] These units are ideal for instant connect up and they work. You can customise the bit rate and it keeps the video smooth. One TX can feed many RX. 5

Marcos	14/09/2024
[2.145 lb] The Osprey is quite versatile and reliable. We have purchased dozens of the G1 & G2 encoders for use throughout numerous facilities in our extensive network. Our primary use is for multicasting, but we also do a number of unicasts and YouTube streams. Osprey tech support is so helpful and knowledgeable, which is another huge selling point. We have used numerous other manufacturers products (HaiVision, Evertz, Ensemble Design, and Lynx). All of them work fine but Osprey offered the best quality and reliability for the price. 5

Grant	11/09/2024
[2.145 lb] Bought this and its matching rx. They seem pretty good. You can select different definitions, FHD, HD, SD, and then can assign them to the 3 types, and allocate bit rates for each. Eg you can select HD, send that to SD and a bit rate of 800 and FHD to HD and a bit rate of 2000 etc. It then selects the resolution type, eg 720P. The only limitation I find a bit strange is that the full range of resolutions, are not available all the time. They vary what is available depending on the Hz, 50Hz or 60Hz of the incoming HDMI. I am using 60Hz, and this does not have 1080i, but if I was using 50Hz, then 1080i would be included. 60Hz has 480i, 480P, 720P, 1080P. 50Hz has 576i, 576P, 720P, 1080P, 1080i. The other strange thing I notice is that if I select a bit rate of 800Kbps, and then monitor the link at the IP level, it seems to be using about 3.5Mbps. However, for quality and ease of use, these seem to be great devices. 5

Paul	02/09/2024
[2.145 lb] Installed a pair of these to transmit to a projector up on the ceiling. POE made it all quick and painless. The unit at the projector is set to recieve from the other unit which can be plugged onto the network from any location around the stage, booth, or the rest of the facility for that matter. Easy for presenters to just plug on and present without fighting the technology. 5

Walter	29/07/2024
[2.145 lb] Bought this to provide better video stream than my JVC GY LS300's RTSP feed (it has a big delay and sketchy feed). This is magnificent uncompressed quality. Already have a NewTek connect Spark, but this makes production a breeze. Been using it with a Church client's live stream and convinced them to go with Bird Dog products. They're not gonna regret it. 5

Ben	11/07/2024
[2.145 lb] There's so many protocols to work with in this little box, and decodes practically anything thrown at it. It's not an entry level unit but it's very very good and VITEC keeps improving it 5

Ed	13/05/2024
[2.145 lb] Almost any camcorder produced before 2018 doesn't have NDI capabilities but with the addition of the Birddog Mini, you can make a leap into the world of networked video without any heavy lifting. Excellent choice for any church or school that needs to stream video but doesn't want to incur the cost of wiring for video. Any HDMI source can be plugged into the Mini and using a local network, connected to a computer with a streaming application such as vMix or OBS. No capture card necessary - it just works. This is a device that needs to be in the toolbox of any serious videographer. 5

Jacob	04/05/2024
[2.145 lb] Using with the 4kQuad-4Channel and this works reliably in a 24/7 environment. 1080i59.94 and 1080p30 sources. I'm using with the internal SFP port and not the built in network. It's a little bit funky to get it to swap between the two, but once it's set, it says there. 5

Grant	09/04/2024
[2.145 lb] Bought this and its matching tx. They seem pretty good. You can select different definitions, FHD, HD, SD, and then can assign them to the 3 types, and allocate bit rates for each. Eg you can select HD, send that to SD and a bit rate of 800 and FHD to HD and a bit rate of 2000 etc. It then selects the resolution type, eg 720P. The only limitation I find a bit strange is that the full range of resolutions, are not available all the time. They vary what is available depending on the Hz, 50Hz or 60Hz of the incoming HDMI. I am using 60Hz, and this does not have 1080i, but if I was using 50Hz, then 1080i would be included. 60Hz has 480i, 480P, 720P, 1080P. 50Hz has 576i, 576P, 720P, 1080P, 1080i. The other strange thing I notice is that if I select a bit rate of 800Kbps, and then monitor the link at the IP level, it seems to be using about 3.5Mbps. However, for quality and ease of use, these seem to be great devices. 5

Brett	30/11/-0001
[2.145 lb] it is like a swiss army knife in my kit. someone needs a popup input it just works... need an overflow feed it just works 5