Designed for long-range shooting, especially in low-light conditions, the Hawke 4-16x50 Vantage AO IR Riflescope Mil Dot IRboasts a large objective to draw in generous amounts of light to allow its use at dawn and dusk, or in heavily canopied areas. To further improve the scope's performance, all of its optical surfaces are fully multi-coated to boost light transmission and improve color fidelity, contrast, and overall image brightness. A large objective also helps to produce a comfortable exit pupil so that when the eye dilates in low-light the entire field of view is easy to see without having to move your eye or head to see the whole scene.

The crosshair reticle is etched onto the glass to prevent fading or shifting, and illuminated center hairs sport four mil dots on each axis for ranging, hold-over/under, or target size estimation. It has five selectable brightness levels in either red or green so it can be customized for most lighting and weather conditions. Red is ideal for low-light conditions or in areas with a very green background where a green reticle can get lost; while green light is easier to see in bright sunlight versus red. Covered turrets help guard against accidental adjustments while a fast-focus collar and knurled rheostat allow you to quickly adapt to rapidly changing situations. Complementing the performance of the scope is a lightweight and durable anodized aluminum housing with a 1" one-piece maintube that is nitrogen-filled and O-ring sealed to be water and fogproof.

Mil Dot IR Illuminated Reticle    5 Brightness Levels in Red or Green    1" One-Piece Maintube    1/4 MOA / Click Impact Point Correction    80 MOA Windage / Elevation Adjustment    Capped Turrets with Parallax Adjustment    Anodized Aluminum Alloy Housing    11-Layer Fully Multi-Coated Optics    Nitrogen-Filled, Water and Fogproof    Runs on One CR2032 Battery

• 4-16x zoom range
• 50mm objective lens
• 11-layer anti-reflection fully multi-coated optics improves contrast and image brightness
• 23.6-6.2' field of view at 100 yards

• Modified duplex crosshair-style reticle
  • Black etched outer posts
  • Illuminated center crosshairs
  • Four mil dots on all axes spaced 1 mrad (3.44 MOA) apart on hairs
  • Illumination can be turned off for non-illuminated black reticle
  • Use for ranging, hold-over/under, and estimating target size
• Placed on second focal plane, sub-tension set at 10x
• Partial illumination:
  • Knurled Posi-Grip adjustment collar
  • Five selectable brightness levels
  • Choose between red and green colors
  • Red is ideal for low-light conditions or in areas with green background where a green reticle can blend
  • Green is easier to see in bright daylight than red
• Runs on one included CR2032 coin-cell battery

• Fast-focus collar
• High-torque zoom ring maintains magnification setting after multiple shots
• 1/4 MOA per click impact point correction
• 80 MOA windage and elevation adjustment range
• Finger-adjustable, low-profile capped turrets
• Adjustable parallax from 15 yards to infinity
• Comfortable 13-3mm exit pupil
• 3.5" long eye relief

• 1" one-piece maintube
• Lightweight and durable aluminum alloy housing
• Nitrogen-filled for water and fogproof performance
• Rated for use on most calibers and recoil-resistant
• Length: 15.3 inches
• Weight: 21.9 ounces

Related Questions and Answers

Q: 1. will this work to plug into my ir extender kit to receive the cable remote signal?

A: It might work, but some of those will only work with their own receivers. But this one can be plugged directly into your cable box if it has a jack for remote IR. If that is too far away, you can extend it with just a 3.5mm headphone extension cord.

Q: 2. I have a ONKYO AV receiver HT-R 391 in a cabinet and Remote do not work if the door is closed do you think this will work with this receiver?

A: yes. it's internal part (ir diode) is the same part in all receivers.However, you MUST have a remote jack./ port.

Q: 3. Does this work with an A7 Mk II?

A: It works fine with the Sony A7s. Should also work generel with Sony Cameras. Subject not on the IR Controller. The settings are in the SYRP genie!

Q: 4. I have a HP TouchSmart IQ526t PC running windows vista TV Tuner, ATSC&NTSC w/PVR. My cable company is Cox using set top box DTA 250HD. Will this work with this set up?

A: No it will not work! This is for a MUXLAb HDMI over cat5 extender

Q: 5. Will this work on a Motorola cable box?

A: It should work if the IR jack on the box is the same type and size. However we would have to say there is no way to be certain unless it is tested.

Q: 6. Can this plug directly into my Verizon cable box, or do I need to also purchase a receiver?

A: It is designed to be used with a separate repeater, like this: Kramer PT-5T and PT-5R IR Extender & Repeater B&H # KRPT5RT MFR # PT-5R/T.

Q: 7. How do you attach it to the eyepiece?

A: The caps just slide directly on the the end. You can have them open up, to the left or to the right.

Q: 8. What focal plane is this scope in?

A: 2nd plane

Q: 9. What is the maximum recoil this scope can handle, such as caliber?

A: I have it on my 91 30 mosin nagant and it's great

Q: 10. Can this scope hold zero on a gamo G magnum 1250 springer air rifle ?

A: I can't speak from experience as I have never had the opportunity to try both items together. But I do believe the scope should have no problem holding zero. That's what is was made for.