Tilta Monitor Power Cable For Camera Accessories

Product Code: eq31735
Availability: In Stock

$29.85 $45.67

Qty

18 reviews Write a review

Description
Reviews (18)

Use this Ikan Tilta Monitor Power Cable for Camera Accessoriesto supply power to your Ikan monitor from a Gold or V-Mount battery connected to one of Tilta's BT-003 plates.

Use with Tilta BT-003 Battery Plates Powers 12V Ikan Monitors

Parameters
Connector 1	Coaxial barrel connector
Connector 2	Coaxial barrel connector
Length	48" / 122 cm
Packaging Info
Package Weight	0.05 lb
Box Dimensions (LxWxH)	5.4 x 4.8 x 0.7"

Related Questions and Answers

Q: 1. how long does the Ronin S battery last while using this Set up for pocket 6k?

A: The Ronin-S has a battery rated at 34 Wh. The battery the Ronin-S normally used is 12-14 Wh. You will get near 3 times the battery time. However the Ronin-S itself will be draining the battery, but at a much slower pace.

Q: 2. Will this power the BMPCC 6K?

A: Yes, this will work with the Pocket 6K as well.

Q: 3. Will this work to adapt a vmount battery to the bottom lemo port of the Tilta Float?

A: Yes, The Tilta RS2 base adapter has a 2 Pin lemo connection that the Tilta D-Tap to 2-Pin Power Cable for BMPCC 4K Cameras would work with.

Q: 4. Does this work with the Tilta Power Passthrough Plate Kit for DJI RS 4?

A: Yes, the Tilta D-Tap to 2-Pin LEMO Power Cable (15.7”) has a two-pin LEMO connection that would work with the Tilta Power Pass through Plate Kit for DJI RS gimbals.

Q: 5. Can you use this instead of the DTap cable to power 3 motors? or is it for a single motor?

A: Tilta does not explicitly define this, as it does with its D-Tap to 7-pin Lemo cable, which is the recommended option for multiple motors.

Q: 6. will this cable power the nano ii motor from the tiltas advanced rear handle usbc power conector?

A: Yes, the Tilta USB-C Power Cable (Black, 2') can be used to power the Titla Nano II Motor from the USB-C power connector of the Tilta Advanced Rear Operating Control Handle.

Q: 7. Can I use this cable with CAMVATE V-Lock Mounting Plate Power Supply Splitter with 15mm Rod Clamp B&H#CAC1524 Mfr#C1524 ?

A: Yes, you can use this cable with the Camvate plate.

Q: 8. Can this be used as a dummy battery for the Tiltaing Side Focus Handle Type III for a vmount battery?

A: no this can not be used on the tilta side angle as the side handle battery cover is not designed for dummy battery use

Q: 9. Will this also power the new 6K Pocket?

A: yes this will also power the pocket 6k camera

Q: 10. How much power output is needed to power the cable and motor through a Sony NPF battery adapter? My adapter drops 7.4v power and I wanted to know if it is correct to power the Nucleus M motor.

A: The Nucleus M motor supports Voltage 7.2-24 V

justin	26/09/2024
[48" / 122 cm] Love this whole set-up. It's incredibly useful and this cable to work with it all is no exception. 5

Matthew	19/09/2024
[0.05 lb] If you've purchased a Nucleus-M kit, you may notice the version of this cable included with the purchase is surprisingly stiff, which makes bundling/tidying it a challenge. This one doesn't have that issue. 5

Dylan	13/09/2024
[48" / 122 cm] A must-have if you have the BMPCC4K/6K. Super useful. Only drawback is that the Ronin's battery life tanks. 5

Bryan	05/09/2024
[48" / 122 cm] honestly idk how anyone uses the pocket wo this cable. just wow 5

Jeff	27/08/2024
[48" / 122 cm] This cable is sturdy for your power source. 5

Aaron	26/08/2024
[48" / 122 cm] Does the job and isn't too long leaving a bunch of real estate to coil up and make presentable on my rig. Perfect length. 5

Rudy	22/08/2024
[48" / 122 cm] A must have for gimbal work. I use this to power my bmpcc6k on my Ronin S. Because of the form factor it is impossible to swap out batteries without having to rebalance the camera on the gimbal. With this cable that is no longer necessary as now the 6K would now be powered from the Ronin! Not much more to say. 5

Jocelyn	22/07/2024
[0.05 lb] What more is there to say: when you use hard to find or proprietary connectors for your cables, you can pretty much charge as high as you want. For me, a cable like that shouldn't be sold for more than maybe $10. I don't blame B and H, but the manufacturer. But what choice do we have ? Nitpicking done. As for the cable, it's sturdy and works like it should. 5

Steven	15/07/2024
[0.05 lb] Because of the large power capacity the Ronin-S holds, plugging my Blackmagic Pocket Cinema Cam 4K (which drains power like no business) directly into my Ronin-S gives me the most sufficient power option to my camera while using it on the Ronin-S. No need for external power which just adds extra weight and could become cumbersome. 5