Camplex SMPTE 311M ruggedized camera cable assemblies with ultra-precision connectors meet your high definition needs in harsh environments without affecting performance!
Featuring Hitachi SMPTE 311M ruggedized camera cable and ultra-precision LEMO connectors, Camplex LEMO FUW-PUW Outside Broadcast SMPTE Fiber Camera Cables are ideal for mobile trucks, outdoor venues, and permanent outdoor installations.
The Hitachi cables are manufactured with Corning bend insensitive fiber to allow for extreme stress, and a tough abrasion and UV-resistant polyurethane jacket to meet all of your high definition needs in harsh environments without affecting performance. The bend insensitive fiber makes these cables perfect for use behind racks and in trucks where space is extremely limited. LEMO certified machine polished fiber contacts are fully protected with Camplex over boots and caps for the most demanding applications for high-speed uncompressed HD video transmissions over long distances.
Assemblies are multi-stage machine polished and tested for <-55db RL with test results supplied for each cable, which meets or exceeds SMPTE 304M/311M standards.

• Connects LEMO 3K.93C camera and camera control unit interfaces
• Rugged Hitachi Tactical SMPTE cable for harsh environments is made in the USA
• Cut through and water-resistant polyurethane jacketed cables
• Extreme temperature cable rating-55°C to +85°C
• Terminations by LEMO Certified Technicians
• Low insertion and return loss

Related Questions and Answers

Q: 1. This cable is very short.I would like to know if the power cable Arri Macho Lemo 2-pin and XLR female 4-pin MFR code # K2.0014342 is equal to the cable of Letus MFR # LT-HX-XLRThe Arri has no image and in the title of the product says male and female, but in the specifications says female and female. Is the description wrong? Is there an image?In the case of the Letus cable, do you have other images to see the pins?I would like more information and if both cables are the same to be able to use it as power cable of a gimbal helix stabilizer to the camera.Thank you.

A: The ARRI 12V, 2-Pin LEMO-Type Male to 4-Pin XLR (Female) Power Cable (20 ) B&H # ARK2.0014342 MFR # K2.0014342 is according to ARRI: ARRI - Cable Le m2p - XLR f4p (0.5m/1.6ft)Cable PWR OUT/12V connector Lemo-type 2p (male) to XLR 4p (female). Can be used to power an external on-board monitor from an ARRI camera, WVR-1, battery adapter plate or a power splitting box. Length: 0.5m/1.6ft. I will alert the web department to the issue. We apologize for any confusion and inconvenience.

Q: 2. Is there a version of this cable with pin 1 +DC/ pin 2 neutral?

A: We are not aware of such a version of this cable. So that we may best assist you finding the proper product for your needs feel free to email us directly at askbh@bhphoto.com.

Q: 3. Does this fit a gold mount and v-mount plate for a battery input? Also can I mount 15mm or 19mm rods on the bottom?

A: Yes both battery plate styles are compatible. You may bolt one of our rod clamps, LW or studio, to the bottom of the housing with the provided 1/4" threaded holes.

Q: 4. I would like to know if you have any specifications of use to know how many times I can clean the fiber optic connector?

A: This has more than 500 cleaning per cleaner.

Q: 5. Purchased this for Bolt 1000 Transmitter/Receiver. What I received was a power supply with a 12V/3A output. Is this the right part?? My original is 9.0V/2A. I don't want to fry anything.

A: This is a power cable created by Teradek specifically for their Cube, Bolt, Bond and Link products. It should work just fine with your Bolt 1000.

Q: 6. Is there a right angle version of this cable?

A: I am not finding that we carry a version of this cable where both sides are right-angled.

Q: 7. Will this connect to the z cam e2 s6 to ride video mic pro?

A: No, the Tentacle Sync Tentacle to 5-Pin LEMO Cable is not intended for use to connect a microphone to the Z CAM E2-S6 Cinema Camera. It is designed to send a timecode signal from a Tentacle Sync timecode generator to any camera or recorder using a 5-pin male LEMO input. The Rode VideoMic Pro has a 3.5mm TRS output which can be connected directly to the camera's 3.5mm TRS mic input. The camera's 5-pin LEMO port is intended to be used for dual-channel XLR microphones and requires an additional XLR audio connector like the CAMVATE Dual 3-Pin XLR to Right-Angle 5-Pin LEMO Audio Cable for ALEXA Mini (B&H # CAC2723) or for single-channel, the CAMVATE 3-Pin XLR to Right-Angle 5-Pin LEMO Audio Cable for ALEXA Mini (B&H # CAC2722).

Q: 8. Is this cable shielded?

A: The Tilta 2-Pin LEMO-Type to 3-Pin Fischer-Type Cable is not a shielded cable.

Q: 9. But, Bond II box includes AC adapter to 2pin lemo already, right? This is just another one, if someone needs to have two of them, right? Thank you

A: If you buy a Teradek Bond yes, it comes with an AC power supply and you do not need this if you are using AC power. However, if you are in a situation out of the USA, you will need power plug adapters. You could get this as a back up and plug adapter source. Or just buy any 3rd party plug adapters such as the following.

Q: 10. Can you use this cable to power a teradek bolt 500 xt and teradek bolt 500 HDMI Lt? Or do you have to use the cable that teradek makes?

A: yes this cable can be used to power the Teradek Bolt 300/500/600/Sidekick II