The Altman Pegasus 6 4000K LED Fresnel Black Enclosureis a 4000K, white-output LED Fresnel with a 6" lens housed in a black enclosure, capable of operation in both mains dimmable and DMX systems. The fixture uses a 120W lamp and casts soft light similar to that produced by theatrical and studio Fresnels, achieving an output equivalent to that of a 500W incandescent fixture.

The Pegasus 6 is designed to seamlessly integrate into preexisting dimmer systems. When the unit is set to Mains Dim Control, it can plug directly into theatrical phase-cut dimmers and functions in both forward- and reverse-phase implementations, replicating the smooth dimming curves of similar incandescent fixtures. The fixture is designed to operate on both 120V and 230V dimming systems, with a voltage selector switch on the rear of the unit. This switch just applies to the operating voltage of the dimming system. The fixture itself has a universal, auto-sensing power supply capable of functioning between 120 and 240 VAC.

The fixture is also fully RDM (Remote Device Management) and DMX compliant. This allows for its use in a lighting system that uses both constant power (for phase-cut dimming) and DMX data control. Simply flip the DMX/Mains Dim switch on the rear of the Pegasus 6 to convert it into a DMX/RDM controllable unit.

It can be used with standard theatrical gels as well as with gels formulated for LEDs. The fixture is constructed entirely from metal and is made in the USA. It ships with a C-clamp, a color frame, a safety cable, and a powerCON power cable.

Lamp Wattage of 130W    Mains Dimmable or DMX Controlled    RDM Compliant    PowerCON and DMX In/Thru Connections    Variable Beam Angle: 15 to 85 Degrees    Beam Adjustment Knob    High-Resolution Digital Dimming    Fully Homogenized Beam    Life Expectancy of 50,000 Hours    Made in the USA

Easily integrates into preexisting dimming systems (both forward and reverse-phase)

Functions in constant power, DMX, and combination constant power/DMX systems

RDM compliant

DMX and powerCON daisy chaining

Variable beam angle: 15 to 85 degrees

50,000 hour life expectancy

High-resolution digital dimming

Fully homogenized beam

Works with standard theatrical gels and gels formulated for LEDs

High CRI (greater than 90)

Ships with a C-clamp, color frame, safety cable, and powerCON power cable

Made in the USA

Related Questions and Answers

Q: 1. What Chimera speed-ring is compatible with this?

A: The Chimera Speed Ring for Video Pro Bank..., B&H # CHSRC738VP • MFR # 9130, and the Chimera Speed Ring for Daylite Jr. Bank..., B&H # CHSRC738DJ • MFR # 9132, would be compatible for your usage needs.

Q: 2. Can this light be left on continuously?

A: This would really depend on the details of what is meant by "continuously." For a variety of reasons an LED option would likely be the better solution for long-term use. This may be an application that would benefit from further discussion. If possible please contact me to go over the details. I can be reached by phone or email. -Tom Casazza 804-349-3453 tcasazza@altmanlighting.com

Q: 3. Why is there no on/off switch?

A: Dracast says that it intended for the dimmer dial on the Dracast Fresnel 2000 Daylight LED Light to control the power. By dialing it down to "0" yu are effectively turning the light off.

Q: 4. Can the barn door slot accept any standard accessories from Arri or are they a proprietary size?

A: No. The ARRI accessories are not compatible with the Litepanels Sola 4+ LED Fresnel Light. The ARRI accessories are manufactured from metal and are proprietary in size.

Q: 5. Is it possible to fit barn doors and a metal wire scrim in the slot at the same time?

A: It depends on the thickness. The barn doors' frame sits in the 65Q's gel holder nicely, but not tightly. You might be able to squeeze an eighth (1/8 ) inch of space out of it but not much more than that without modifications. As for modifications, a judicious use of a pair of pliers might allow you to slightly bend the 65Q's frame out enough to do what you need to do without too much change in cosmetics or function.

Q: 6. How would this compare to an Aperture 300D? This looks like a better option for me, but is it as bright?

A: The Sola 4+ flood 3000LUX @ 1m, spot 32,000LUX @ 1m. The Aputure is 14,000LUX @ 1m.

Q: 7. What kind of THROW do these have? Can I use these for a stage spotlight from 100' away to achieve F2.8 of F4?

A: According to the manufacturer, the Sola 6+ has an output comparable to that of a 1200 watt HMI light. However, it would not be as effective if placed at 100 feet away from a stage.

Q: 8. Does it have a fan?

A: YES

Q: 9. What kind of bulbs to use for this product?

A: The most common bulbs are BTL and BTN. They are 500 & 750 watt bulbs. 750W is the highest wattage you can use. There are more uncommon bulbs that will fit as well, such as 565w or 600w.

Q: 10. What's the weight?

A: 3.6 lbs/1.63 kg