This Mogami SS-01 TRS 1/4" Male to Male Quad Patch Cable 1'is a high-performance 4-conductor patch cable for studio use. Neglex Studio Quad #2893 cabling is used for ultimate clarity and freedom from noise and RF interference. This cable uses molded 1/4" TRS connectors at both ends.

Neglex-type Quad Cables have been developed for the highest quality recording applications where maximum definition of recorded sound is of critical importance. Special proprietary materials & construction methods make these state-of-the-art mic/line cables a must for direct to DISC and digital recording. Basic matters of flexibility, microphonics and shielding effect have been designed to meet international professional requirements.

A balanced quad structure is effective for high-definition sound transmission as well as in canceling electromagnetic induction caused by nearby equipment such as floodlight projection, and therefore is well adapted to motion picture and TV studios.

Conductor insulation is XLPE (Cross-Linked Polyethylene) which has excellent electrical characteristics and prevents shrink-back during soldering.

Served (spiral) Bare-Copper Shield is better for sound quality and simplifies termination.

Related Questions and Answers

Q: 1. Can I use this cable with a RODE 3.5mm TRS Female to XLR Male Adapter to send audio from a Zoom F4(sub out) to a camera's XLR?

A: The Mogami Gold 3.5mm TRS Male to 3.5mm TRS Male Stereo Audio Cable (15') could be used to connect a line output to a mic input, but you will need to switch your camera's input to line level or attenuate the input gain to avoid overloading the preamp.

Q: 2. Balanced or unbalanced?

A: The Pearstone PM-TRS 1/4" TRS Male to 1/4" TRS Male Interconnect Cable is a balanced cable.

Q: 3. If the split is 18" from the end, which side is closer to the split? The XLR or the 3.5mm?

A: The XLR connectors on the Mogami Gold 3.5mm TRS Male to Dual XLR Male Y-Cable (6') are closer to the split end of the cable.

Q: 4. Is this a single cable or dual rca to dual rca (stereo pair)? Thank you.

A: These Mogami cables provide only monaural continuity. There's a single male RCA plug at each end when you buy one piece, so you'll need to buy 2 pcs. for stereo continuity.

Q: 5. why would anyone need a cable this long

A: The Mogami Gold Stereo 1/4 Male to Stereo 1/4 Female Headphone Extension Cable is designed primarily as a quality headphone extension cable.

Q: 6. It fits the Rode VideoMic Pro + microphone And on the other hand the H4N PRO zoom external recorder?

A: Yes BH #MOG353515 can be connected to both the Rode Videomic Pro+ and the Zoom H4N Pro.

Q: 7. Can I use this cable with a Deity V-Mic D3 Pro to split the outgoing signal to use the XLR inputs on a Tascam DR40? Or do you recommend another option?

A: The Mogami Gold 3.5mm TRS Male to Dual XLR Female Y-Cable is not going to work to connect the Deity V-Mic D3 Pro because you need the XLR connectors to be male in order to connect to the inputs on the Tascam DR40 Recorder. The Mogami Gold 3.5mm TRS Male to Dual XLR Male Y-Cable - 10' (B&H # MOG352XLRM10) is the version that you need.

Q: 8. What is the length from the split location to the end of the XLR cable?

A: The length from the split location to the end of the Mogami Gold 3.5mm TRS Male to Dual XLR Male Y-Cable (6') is 18".

Q: 9. Will this cable also work with other microphones like the deity v-mic d3?

A: Yes. The Rode SC8 can be used for any audio application that requires a cable with standard 3.5mm TRS to 3.5mm TRS connectors.

Q: 10. Hi was looking at this cable was wondering if this good for a dual pc streaming setup plugging it in for my mic and headphones?

A: The Mogami Gold 3.5mm TRS Male to 3.5mm TRS Male Stereo Audio Cable is a simple 3.5mm audio cable and can be used for any application that would require one. If you are looking for guidance on the specifics of your audio setup, please feel free to contact our team by phone, email, or live chat.