Da-Lite 29528 Flex Plex 65X116 In-Wall Projection Screen

Da-lite 29528 Flex Plex 65x116 In-wall Projection Screen

Product Code: eq32245
Availability: In Stock

$23,414.40 $34,887.46

Qty

6 reviews Write a review

Description
Reviews (6)

The Da-Lite 29528 Flex Plex 65x116 In-Wall Projection Screenfrom Da-Lite 29528 Flex Plex 65x116 In-Wall Projection Screenis designed for applications that cannot accommodate a large crate. It can be used with one of nine standard coating options formulated to fit your application requirements. The Flex Plex is an acrylic, lightweight rear projection screen that ships in a roll. Coatings are permanently bonded to the substrate and cannot peel off.

Da-Lite 29528 Flex Plex 65x116 In-Wall Projection ScreenPlease specify the desired screen surface when ordering. For Wide-Angle (WA) surfaces, additional costs apply.

133" Diagonal / 16:9 Aspect Ratio For Rear Projection Acrylic, Lightweight Construction Ships in a Roll In-Wall Installation Specify Coating When Ordering

Key Specs
Front/Rear Projection	Rear
Aspect Ratio	16:9
Motorized	No
Diagonal	133.0" / 337.8 cm
Type
Front/Rear Projection	Rear
Aspect Ratio	16:9
Style	In-Wall
Motorized	No
Dimensions
Viewing Area	65.0 x 116.0" / 165.1 x 294.6 cm
Diagonal	133.0" / 337.8 cm
Overall HxW (Max)	70.0 x 121.0" / 177.8 x 307.3 cm
General
Weight	101 lb / 45.8 kg

Ships in a roll

Includes frame, mounting t-track, and trim

All surfaces can be cleaned with mild soap and water, and are flame-retardant and mildew-resistant

Related Questions and Answers

Q: 1. How low can the bottom of the viewable screen be from the floor level?

A: About 8" off the floor is the lowest height setting.

Q: 2. Can I use the Anton Bauer Cine battery to power the Flex 10 x 10 with this cable?

A: From our in-house engineer: Yes, as long as the output is between 13v and 29v it can power your 10 x 10 flex.

Q: 3. Westcott Flex D-Tap Cable- is that a stackable d-tap connector so I can connect 2 Flex LED lights to a single battery?

A: No. But you can easily get a multi plug adapter. a href= http://www.bhphotovideo.com/c/product/204182-REG/Anton_Bauer_POWERTAP_MULTI_PowerTap_Multi.html target= _blank http://www.bhphotovideo.com/c/product/204182-REG/Anton_Bauer_POWERTAP_MULTI_PowerTap_Multi.html/a

Q: 4. Would it attach to Westcott Flex 1x1? They look exactly the same in size.

A: No it will not fit.

Q: 5. Is there a weight limit/recommended laptop weight for this product?

A: The load capacity of the Gabor Laptop Flex Stand is 13 pounds.

Q: 6. Will the 2 ft flex yoke also work with the 1 x 3 slim Jim cine frame (used in the Westcott Peter Hurley LED light kit?)

A: Steven,Mounting the 1 x 3 requires the 1' version of the yoke.

Q: 7. Can the dc plug fit into a Video Device PIX-e7?

A: As far as I know, this is a proprietary plug for the Flex light.

Q: 8. Does anyone know how wide these straps are? Thx

A: Slightly less then a half of inch wide

Q: 9. rotation of top bar is which degree?

A: The top bar for this item BH #EAMINIMAX rotates approximately 120 degrees from left to right on center.

Q: 10. Will this unit also ship with an Anton Bauer Gold Mount version?

A: No it will not.

Ryan	18/07/2024
[In-Wall] great value, I looked all over for a large screen for a decent price and landed on this one. It had a little tag that said it self-retracts slowly and it doesn't but that was not a feature I was counting on anyway, it has a string to help it retract cautiously. would definitely recommend this one if you want a big screen on a budget! Takes 2+ people to mount, its pretty heavy when you're on a ladder! 5

Karl	05/07/2024
[In-Wall] This is my fourth ALR (ambient light reflecting) screen. The first thing to know is, there are no miracle screens. There are good ALR screens, but none perform miracles. Even the best don't show a great picture in a really bright room. The second thing to know is, don't necessarily believe the promotional pictures and videos from manufacturers that show amazing screen performance. They have positioned the screens, projectors and cameras to show the screens at their very best. You are unlikely to duplicate this in a real world situation. Almost all ALR screens have, to one extent or another, a major problem – screen artifacts. Shimmering, hot spots, sparkles, grainy appearance and so on. In order to eliminate this problem I have owned four different screens. My newest one, which wasn't available when I first started my quest for better picture quality, the Da-Lite Parallax, has none of these problems. Zero! The Parallax probably doesn't have quite as good of ambient light rejection properties as some of the other screens, but with some light control and careful placement of light sources, you can still have light in the room and a great picture. A great artifact free picture is really important now that we have 4K material to watch. 5

Kevin	03/07/2024
[In-Wall] The screen functions as described. we used the additional brackets to mount the screen to a concrete wall. The mechanical parts of the screen are smooth and easy to use! 5

Jonathan	14/05/2024
[Rear] There was some concern that the screen would not get here in time for an event. After contacting the customer service they assisted in getting a tracking confirmation. It arrived in the nick of time. I was surprised that the model had some features to the leg structure that we were not expecting. It made it very stable and user friendly. 5