Bb&S Lighting Pipeline 3' Raw 3200K Pipe 10' Cable 3-Pin Xlr

Bb&s Lighting Pipeline 3' Raw 3200k Pipe 10' Cable 3-pin Xlr

Product Code: eq32463
Availability: In Stock

$880.20 $1,188.27

Qty

8 reviews Write a review

Description
Reviews (8)

The BB&S Lighting Pipeline 3' Raw 3200K Pipe 10' Cable 3-Pin XLRfrom BB&S Lighting Pipeline 3' Raw 3200K Pipe 10' Cable 3-Pin XLRis a remote phosphor LED softlight with a wide coverage of 180 degrees and a high TLCI rating of 95+. This version of the pipe is sold without a required driver or dimmer so that you may use your own. The 3-pin XLR connector allows plug-and-play functionality with the optional 4-Way Controller. The controller can handle up to 4 Raw Pipelines and control dimming manually or via DMX as well as CCT adjustments for 3200/5600K mixed setups.

TCLI: 95+ Manual Dimming or DMX 512 Flicker-Free Dimming from 100%-0 Wide 180º Light Dispersion High Light Output

Key Specs
Item Type	1x LED Light Tube/Wand
Included Storage Case	No
Photometrics	Not Specified by Manufacturer
Color Temperature	3200K
Color Modes	Tungsten
Color Accuracy Standard	TLCI 95
Dimming	Controller Not Included • 0 to 100%
Front Accessory Mount	Proprietary
Power Source	AC to DC Adapter (Not Included)
Input Power	100 to 240 VAC, 50 / 60 Hz 14 VDC
Power Consumption	27 W
Light Fixture
Item Type	1x LED Light Tube/Wand
Included Filters	Phosphor Panel (Built-In)
Included Storage Case	No
Photometrics	Not Specified by Manufacturer
Color Temperature	3200K
Color Modes	Tungsten
Color Accuracy Standard	TLCI 95
Dimming	Controller Not Included • 0 to 100%
Cooling System	No
Expected Lamp Life	50,000 Hours
Built-In Flash	No
Umbrella Mount	No
Front Accessory Mount	Proprietary
Mobile App Compatible	No
Power & I/O
Power Source	AC to DC Adapter (Not Included)
Inputs/Outputs	1x Built-In Cable (10' / 3.3 m) with XLR 3-Pin Power Input
Input Power	100 to 240 VAC, 50 / 60 Hz 14 VDC
Inline Switch	No
Power Pass-Thru	No
Power Consumption	27 W
General
Display	No
Environmental Resistance	Dust-Resistant (IP20)
Operating Conditions	14 to 104°F / -10 to 40°C
Materials	Aluminum
Dimensions	36 x 1 x 1" / 91.4 x 2.5 x 2.5 cm (Fixture)

Related Questions and Answers

Q: 1. Will this work with the C500 mk ii if connected to a power supply (not a core swx power supply)?

A: We are not aware of this working with the C500 Mark II.

Q: 2. Will this work with the Ninja Inferno as well?

A: Hello Cory S, yes it will, it is the same connector type

Q: 3. Will this work for Ronin 4D?

A: The Tilta 6-Pin to 4-Pin XLR Cable is made to power the ARRI ALEXA MINI.

Q: 4. Are all 4 pins wired?

A: Pinout of 4-pin XLR connector used for 12V powerThe 4 pin male XLR connector is found on nearly all professional location video equipment. It is used for an external 12 volt DC input. Pinout: pin 1 = negative pin 4 = positiveNo connections are made to either pin 2 or 3. NOTE: Check and double check that the wiring is correct to your equipment before connecting this to any expensive video gear. Mistakes can be costly to you.

Q: 5. How many 8' Pipeline Reflect fixtures can be run from one power supply? Can a splitter be used? Also, all the pipeline reflects seem to have a 3 pin, but the 8' calls out a 4 pin XLR. Does that work with their 3 pin power supply? Also, what yoke would you sue if attaching to a pipe clamp in a grid?

A: Each BB&S Lighting Pipeline Reflect (5600K, 8') uses its own power supply. I draws to much power to split, It is BH #BBS3694 • MFR #BBS-3694, https://bhpho.to/3DN9XLf . And the yoke is BH #BBS6423 • MFR #BBS-6423, https://bhpho.to/3WkYD08

Q: 6. Will this also connect/work with to a birddog p240 for audio in/out?

A: The Atomos 10-Pin LEMO Type to XLR Breakout Cable for Shogun has not been tested for compatibility with the birddog p240 for audio I/O.

Q: 7. Can this cable work on bebob 2 dual charger which has 16.5V and 5A output ?

A: Yes it can.

Q: 8. Are all 4 pins wired this is to be used to connect a DC power supply to a camera?

A: This is possible, but it depends on the DC Power supply and camera you are using.

Q: 9. Is this powered by ac or dc

A: This actually comes with a 3 Pin XLR; it draws 40 watts and is part of a plug and play system when used with the BBS-3593 4-way controller with DMX in/out, manual dimming and Strobe built in. It comes with a 48 Volt Power Supply that allows dimming smooth all the way to zero.i can be reached at 310-491-6259 for any direct questions.

Q: 10. Does the BB&S 4-Way Controller provide power as well?

A: Yes, the following unit does come with a ballast system that connects directly to a wall outlet

Patrick	07/09/2024
[TLCI 95] Quality matters. 5

Magnus	29/08/2024
[TLCI 95] When you just need a lot of light, with great character and not need any bi-color etc 5

Julian	08/08/2024
[Proprietary] This all metal clamp is great! I've attached this clamp to my c-stands and to a few poles in my studio and the clamp holds up just fine. According to the specs, this clamp can hold 220 lbs and just by the sheer girth of this clamp - I believe it. I doubt I'd ever be mounting more than 50lbs to this clamp, but it's nice to know that it has the ability if needed. Don't forget to use the safety cable when attaching devices to the clamp! [I have received this product in exchange for my honest review] 5

oregonshoe	17/07/2024
[50,000 Hours] 10ft. length give me more flexibility for camera placement. Low price + Best quality. Great customer service from B&H Photo Video. 5