Tor is an adjustable heavy-duty cable stripping and slitting tool for all insulation types used in today's cables. Many of Tor's unique features include interchangeable cable clamps, giving it great cable capacity.

• Easy to use - positive locking positions for circular, lengthways and spiral strips
• The blade automatically returns to its starting position at the end of a strip reducing the possibility of broken blades
• No special tools required to interchange cable clamps
• Blade height adjustor is almost friction free, easy to rotate for fine blade height adjustment
• Ergonomic - well-balanced design with rests for thumb, index and little fingers to ease raising the cable clamp
• Eyelet built-in base of tool for attaching a lanyard

Related Questions and Answers

Q: 1. What is the diameter of the mount opening? Is there any min. - max light size for this?

A: This item would only be a zippered jacket. Otherwise, the ALZO Drum Overhead Light with 4 LED Bulbs, BH # AL1981 would come with the appropriate fixture and lamps.

Q: 2. Some Arca dovetails from other brands don't lock up tight with the RRS lever clamps. Will the Tether Tools TA-CSLB Arca base secure tightly with Really Right Stuff Lever clamp such as the RRS B2-LLR II?

A: Tether Tools TA-CSLB does work well with RRS lever clamps because Tether Tools copied the RRS version Really Right Stuff Cable Relief Spacer. They have it here if you want the RRS version, not much more expensive. https://www.bhphotovideo.com/c/product/1301071-REG/really_right_stuff_crs_cable_relief_spacer_cable_relief_spacer.html

Q: 3. Will this work for 179dt cable?

A: Compatible with RG58/59/62AU, RG6/6QS, RG174, Belden 1505A, 1855A, 8281 & mini-coax.

Q: 4. Will this case fit the RX-10 III with the lens hood screwed backwards over the lens?

A: Lathe, Yes, the RX10 iii will fit into the case shown with the lens hood reversed. Joel

Q: 5. Does this work on Belden 1694A or is there a different option for this?

A: Belden 1694 cable is 6.96mm / 0.275 inch.The strippers do cable Diameters from 0.1 - 0.315 .So you should be all good.The inside rollers come out and can be turned upside down to make the cable width smaller or lager.If your are doing bulk connectors of one type of cable than this would be great. Just take the time to set it up properly.I dont get too much use out of mine because I constantly used different cable sizes and its easier to use a knife and cutters.

Q: 6. How would this cable work for connecting a preamp to an audio interface, or connecting a Mesa Boogie Cab Clone to an audio interface in a recording studio environment? Would this work or do I need a Balanced patch cable? Thank you.

A: Line inputs on an audio interface are generally balanced connections or able to use both if the input doubles as a guitar/instrument input. It is best to check the specs on both devices being connected for the proper cable. In most cases using an unbalanced instrument cable will not be an issue for connections that require relatively short runs.

Q: 7. Will this jacket fit on the Canon EOS M6 camera?

A: Unfortunately no, this is custom-fitted for the Canon EOS M5.

Q: 8. Does this case fit the new RX-10 IV?

A: The LCJRXJ/B jacket case is compatible with RX10M3 and RX10M4.

Q: 9. lens hood?

A: A hood will fit if attached to the lens in reverse for storage.

Q: 10. Can I use 7mm or 8mm thick cables?

A: The Tether Tools TetherGuard Camera Support is designed to work with cables measuring 3.5-8.5mm