Pair your select Panasonic Lumix camera to the ONsite Relay System with this Tether Tools Relay Coupler for Panasonic Lumix DMW-BLC12from Tether Tools. In this case, it takes the place of the DMW-BLC12-type battery pack and provides a connection to the power source for long-term, continuous operation of your camera. This setup can easily be swapped out with another coupler to provide you with compatibility across camera systems.

Connects Camera to ONsite Relay System    Slides into Camera Battery Slot

DMC-GH2
DMC-GH2H
DMC-G5
DMC-G6
DMC-FZ200
DMC-FZ300
DMC-FZ300GK
DMC-FZ1000
DMC-GX8
DMC-GX8H
DMC-G7

Related Questions and Answers

Q: 1. Does this come with the AC adapter?

A: No, the Case Relay Power System does not come with an AC adapter.

Q: 2. When camera/coupler/Tether Tool is operating, suggestions of how to keep battery drain from exceeding the simultaneous charging? I have found it will not do both at the same time. Thanks.

A: It works for me. Keep in mind you have to use a power bank or charger that outputs at least 2 amps (the one i use is 2.1 amps). I tried with a power bank that only outputs 1 amp initially and that gave me the same problem as you have.

Q: 3. Will this work with a G85?

A: According to Tether Tool's website, the G85 is supported. As of 10/12/2020, the current list of cameras support by the CRPBLC12 are: Panasonic LUMIX DMC-GH2, DMC-GH2H, DMC-G5, DMC-G6, DMC-G8, DMC-G80, DMC-G81, DMC-G85, DMC-FZ200, DMC-FZ300, DMC-FZ300GK, DMC-FZ1000, DMC-GX8, DMC-GX8H

Q: 4. is. this coupler compatible with the GH5mark 2?

A: No, the Tether Tools Relay Camera Coupler for Panasonic Cameras with DMW-BLF19 Battery is not compatible with the Panasonic Lumix GH5 II Mirrorless Camera (BH #PADCGH5M2). Instead you will need a dummy battery like the Kondor Blue DMW-BLK22 Dummy Battery to DC 1.35/3.5mm Coiled Cable (16 to 36"), BH #KODCBLK22.

Q: 5. Does this work with A7S III and FX3 without the battery warning? The two cameras mentioned would spit "the operation and safety of this battery cannot be guaranteed, continue" warning on most third party batteries and couplers.

A: If you use the Tether Tools Relay Camera Coupler for Sony Cameras with NP-FZ100 Battery with the Tether Tools Case Relay Camera Power System Both cameras are fully compatible and they won't display the warning message.

Q: 6. On a Canon M5, you can't operate the camera without closing the battery door. As far as I can see, there is also no cable outlet of any kind. How is this product physically able to work?

A: You should be able to make it work with the M5 without keeping the battery door open. Canon sells a similar coupler to this for the M5 that plugs into the wall. Ours is meant to plug into a USB battery pack.On the bottom of the inside of the door, do you see a silver piece with a round hole? The version I've found has a number 3 on that rubber piece, but yours may be different. That rubber piece should pop out and you would plug the cable into the coupler through that hole.

Q: 7. What kind of AC adapter is needed for this?

A: The ac adapter that works directly with the Panasonic cameras is the DMW-AC10. CLick the link below to view; https://www.bhphotovideo.com/c/product/1051072-REG/panasonic_dmw_ac10_ac_adapter_for.html

Q: 8. Does this work with the Sony a6500?

A: Yes it should. works on the 6300

Q: 9. What kind of connector is on the end of the cable?

A: It's a proprietary connector that is designed to only connect to the Tether Tools Case Replay Camera Power System. The Coupler is merely the lightweight battery that fits into your camera, with a connector to the external power supply.

Q: 10. Does this have a 5.5/2.5 mm size connector?

A: Yes, it has a 5.5 od and a 2.5 id.