The Losmandy Vixen Side by Side Platefrom Losmandy Vixen Side by Side Plateis a long mounting plate which supports two saddle clamps - one mounted at each end.

Each saddle clamp or plate is designed to accept the Vixen or Losmandy dovetail plate standard and the two clamps are placed 9.25" apart, center to center. The side-by-side plate allows two optical systems to be mounted right next to one another, a task accomplished by rotating your equatorial mount's saddle 90°.

Two Joined Saddle Clamps    For Vixen or Losmandy Style Plates    Mount Two Optical Systems Side-By-Side    Saddle Separation Distance: 9.25"    Weight: 2.7 lb

Related Questions and Answers

Q: 1. How do I connect the pouch to the Easyrig Minimax? (Can't find any guides online)

A: The Easyrig Side Pouch is not compatible with the Easyrig Minimax. The compatible pouch would be the Easyrig Side Pouch for Minimax System, B&H # EAMM045.

Q: 2. Will this fit a 127 mm APO? The current set up is 3 bolts at each end of a dovetail. Length ways separated by 160mm. Side ways separated by 10mm

A: No, the Losmandy Universal Dovetail Plate (7") will not fit that configuration. It does not have 3 holes at each end 160mm apart with 10mm between the individual 3 end holes.

Q: 3. Will this fit on the OG komodo?

A: Yes, the Kondor Blue Left-Side Plate for RED KOMODO-X (BH #KOKOMXLP) is also compatible with the original Komodo.

Q: 4. Does this Side plate have enough space to mount both the Wooden Hand Grip and a TC Generator like the Lockit?

A: When the Wood Hand Grip is installed, the grip itself sits about an inch out from the Right Side Plate. Depending on any mounting points on the TC Generator, and how thick it is, there may be enough clearance to attach it to the Right Side Plate, above the Rosette Mount.

Q: 5. Do 1/4 20 screws come with the dovetail?

A: Screws do not come with this dovetail plate. A plate with screws: Coronado Vixen-Style Dovetail Plate (6") BH #COVSDTMP • MFR #07932 https://www.bhphotovideo.com/c/product/1303865-REG/coronado_7932_vixen_style_dovetail_mounting_plate.html

Q: 6. Does this have mounting holes at the *bottom* to attach to the plate that comes with Manfrotto 609 Nitrotech https://www.bhphotovideo.com/c/product/1470943-REG/manfrotto_mvh608ahus_608_nitrotech_fluid_video.html ?

A: Yes, the Losmandy V-Series Dovetail Plate (4") has 1/4"-20 tapped mounting holes to allow it to mount on top of the 504PLONGR Camera Plate that comes with the Manfrotto 608 Nitrotech Fluid Video Head.

Q: 7. Does it fit on SkyWatcher Esprit OTA rings?

A: The MFR needs to be contacted for this answer.

Q: 8. I want to attach my D-SLR to an equatorial telescope mount (Vixen saddle). Hoping to just screw it onto the camera, pop it into the telescope mount, and go. Will this do that? If not, what will?

A: Yes, that will do exactly what you want, but you will need a 1/4 20 stud to screw into it : https://www.bhphotovideo.com/c/product/1421963-REG/smallrig_1879_1_4_to_1_4_thread.html/accessories Thanks for choosing B&H Lenny E

Q: 9. Will this work with the vest included in Easyrig Minimax?

A: Yes, the Easyrig Side Pouch is compatible with the Easyrig Minimax.

Q: 10. Is this compatible with the bright tangerine NATO top handle (MFR #B4003.1016)? If I get the R/S top bracket for the KOMODO instead of this top bracket, which run/stop button should I add to it?

A: Yes, The optional Bright Tangerine NATO Top Handle can mount onto the TOP rail using its NATO clamp.