The Wooden Camera Baseplate for FS7 FX9 C100 C300 C500supports 15mm LWS rods at the correct lens height, and it offers a vertical 15mm rod port for incorporating the optional Unified Lens Adapter Kit. This Kit allows you to support different lens adapters from Wooden Camera, Metabones, and other brands.

The Baseplate includes the Core Unit, a Lower Quick Dovetail tripod plate on the bottom, and a Dovetail Camera Plate for the Sony FS7/FX9, Canon C100 Mk II, C300 Mk II & C100/C300/C500. Other Unified Baseplate Dovetail Plates are also supported, allowing for quick swaps with a variety of cameras.

The Baseplate provides two quick release options. You can remove the Dovetail Camera Plate only and leave the Core Unit with your rod pair behind, or you can remove the Core Unit from the Lower Quick Dovetail, in which case you'll have a dovetail on the bottom of the Core Unit that's compatible with any 2060 Dovetail, Safety Dovetail, or Shoulder Rig.

The Dovetail Camera Plate features a long slot along its center that lets you secure it to the camera with multiple screws (included), which can be set up to 2.8" (70mm) apart. It also has a non-slip rubber surface that will prevent the camera from twisting.

The Dovetail Camera Plate has an ARCA Swiss standard dovetail compatible with many third-party products. It also has threaded 1/4"-20 threaded holes on the bottom for attaching to gimbals or other compatible tripod plates. The Lower Quick Dovetail has 1/4"-20 and 3/8"-16 threaded holes for attaching to tripod plates or ARRI standard bridgeplates, such as the Wooden Camera Unified Bridgeplates.

The Unified Baseplate can also be upgraded for VCT-14 compatible mounting options. Simply attach it to the optional Unified VCT Wedge Plate, which can then be mounted on the Unified VCT-14 Tripod Plate, also sold separately. The Unified Baseplate is backward compatible with Wooden Camera's original Quick Dovetails (Standard, DSLR, and Large).

15mm Rod Support / Correct Lens Height    Vertical Rod Port (Lens Adapter Support)    Two Quick Release Options    Use with Bridgeplates, Gimbals, Etc.    Center Camera Slot for Multiple Screws    Anti-Twist, Non-Slip Rubber Surface    Upgradable for VCT-14 Mounting Options    Backward Compatible with Quick Dovetail

• Supports 15mm LWS rods at the correct lens height
• Offers a vertical 15mm rod port for incorporating the optional Unified Lens Adapter Kit (for lens adapter support)
• Includes the Core Unit, Lower Quick Dovetail tripod plate, and Dovetail Camera Plate
• Two quick release options—remove Core Unit or remove Dovetail Camera Plate
• Core Unit features a dovetail on the bottom, compatible with any 2060 Dovetail, Safety Dovetail, or Shoulder Rig
• Dovetail Camera Plate features an ARCA Swiss standard dovetail and threaded holes for attaching to gimbals or other compatible tripods plates
• Lower Quick Dovetail offers threaded holes for attaching to tripod plates or ARRI standard bridgeplates
• Long slot along the center allows multiple screws to be attached to the camera, set up to 2.8" (70mm) apart
• Anti-twist, non-slip rubber surface
• Upgradable for VCT-14 compatible mounting options
• Additional Lower Quick Dovetail and Dovetail Camera Plates can be purchased for quick swap capability
• Backward compatible with original Wooden Camera Quick Dovetail

Related Questions and Answers

Q: 1. Does it work with Sony Fs-5?

A: Hello Nicolas,This baseplate was designed for the Canon C series cameras, for the Sony FS5, we do have a baseplate designed for it, very similar to this one.a href= https://www.shapewlb.com/en/product/brands/sony-camera-supports/sony-pxw-fs5-camera-supports/sony-fs5-fs5m2-baseplate_802.aspx?id_page_parent=1179 target= _blank https://www.shapewlb.com/en/product/brands/sony-camera-supports/sony-pxw-fs5-camera-supports/sony-fs5-fs5m2-baseplate_802.aspx?id_page_parent=1179/aDon't hesitate to reach out to us if you have questions regarding this product.We thank you for your interest in our products.The SHAPE team

Q: 2. Will this rig work with a C100 AND a C300 Mark ii?

A: Hello Julia,Thank you for your question! The baseplate in this rig was not designed for the C100 and C300 MKii. It was designed to fit the C300 mark i. It can work, but won't be ideal and might not respect the optical center of those cameras. For instance, the C300 mark ii is a bigger camera, so if you want to add a mattebox, it might not be centered. At that point, we cannot guarantee it will fit perfectly. We hope this helps and we thank you for your interest in our products. The SHAPE team

Q: 3. Hi all. When mounting the c100 mark2 , are you able to look through the viewfinder comfortably ? Is it possible with this rig ?

A: Hi Joseph!Thanks fo your interest in SHAPE products. The SHAPE Offset rig for Canon C100/300/500 has been designed from the start to be adjustable so you can configure it as you need. You'll be able to extend your rig if you want just to use your LCD screen or to contract it as you want when using the viewfinder. Thanks for asking.

Q: 4. What are the widthof the rods centre to centre?

A: They are spaced 100mm apart per 15mm Light Weight Support (15mm LWS)

Q: 5. Does this work with the C200?

A: Hello Kaleb, Thank you for your question! Zach is right, the optical center is not ideal because this plate was designed to fit the C300 Mark i. We do have a specific baseplate for the C200 which can be found here:a href= https://www.shapewlb.com/en/product/brands/canon-camera-supports/canon-c200-camera-supports/canon-c200-15mm-base_1011.aspx?id_page_parent=1281. target= _blank https://www.shapewlb.com/en/product/brands/canon-camera-supports/canon-c200-camera-supports/canon-c200-15mm-base_1011.aspx?id_page_parent=1281./aYou can consult its features to see what it offers.We hope this helps and we thank you for your interest in our products. The SHAPE team

Q: 6. The current bundle includes an extension cable for Canon's grip. How do you mount the original grip to the rig? Is the bundle complete?

A: Hello Dear Customer!Thank you for your question! The bundle does in fact include our C100-C300-C500 bracket (HAC300)https://a href= http://www.bhphotovideo.com/c/product/867118-REG/SHAPE_hac300_C300_Bracket_for_C300.html target= _blank www.bhphotovideo.com/c/product/867118-REG/SHAPE_hac300_C300_Bracket_for_C300.html/a which you attach by replacing the right rubber handgrip, and then attach the original Canon's grip. B&H will correct this mistake on their website. We apologise for this issue. We thank you for your interest in our products!Best regards,The SHAPE team

Q: 7. What's the main difference between this and the Shape Offset Rig?

A: The difference between this product and the Offset Version, which is B&H # SHC100OF, is the Offset configuration itself. The Standard Version has 2 longer 15mm rods that go straight from the handles to the shoulder pad. The offset rig has two shorter sets of 15mm rods and an offset bracket. Some prefer the offset design because it puts the camera directly in front of your eyes for use.https://bhpho.to/2b1Xcio

Q: 8. Does this baseplate work with a mattebox without needing a riser to put it at the correct height for the C300?

A: This plate allows the rods to sit at just the right height for the Arri MMB-1 Mattebox.

Q: 9. I couldn't find any photos or video of this offset rig in action. I'm very curious to see how it works using the LCD screen as a monitor and how well all of the camera functions can be reached. I am also curious to see how this rig works with the hand grip. Does anyone know of any demo videos of this product?

A: Hi, Visit this link to view different setup solutions. a href= http://www.shapewlb.com/en/canon-c100-c300-c500-supports.aspx target= _blank http://www.shapewlb.com/en/canon-c100-c300-c500-supports.aspx/aYou can also contact support@shapewlb.com

Q: 10. Hi can i use this with a sony fx3? Thanks

A: Yes you can. While it is customized to work best with the C300 the mounting screws are standard which means that it will work with just about anything.