You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Wooden Camera Baseplate For Fs5, Eva-1, Varicam Lt, Varicam 35

Wooden Camera Baseplate For Fs5, Eva-1, Varicam Lt, Varicam 35
  • Product Code: eq32832
  • Availability: In Stock

$1,497.00 $1,826.34

The Wooden Camera Baseplate for FS5, EVA-1, VariCam LT, VariCam 35supports 15mm LWS rods at the correct lens height, and it offers a vertical 15mm rod port for incorporating the optional Unified Lens Adapter Kit. This Kit allows you to support different lens adapters from Wooden Camera, Metabones, and other brands.

The Baseplate includes the Core Unit, a Lower Quick Dovetail tripod plate on the bottom, and a Dovetail Camera Plate for the Sony FS5 and Panasonic EVA-1, VariCam LT, and VariCam 35. Other Unified Baseplate Dovetail Plates are also supported, allowing for quick swaps with a variety of cameras.

The Baseplate provides two quick release options. You can remove the Dovetail Camera Plate only and leave the Core Unit with your rod pair behind, or you can remove the Core Unit from the Lower Quick Dovetail, in which case you'll have a dovetail on the bottom of the Core Unit that's compatible with any 2060 Dovetail, Safety Dovetail, or Shoulder Rig.

The Dovetail Camera Plate features a long slot along its center that lets you secure it to the camera with multiple screws (included), which can be set up to 2.8" (70mm) apart. It also has a non-slip rubber surface that will prevent the camera from twisting.

The Dovetail Camera Plate has an ARCA Swiss standard dovetail compatible with many third-party products. It also has threaded 1/4"-20 threaded holes on the bottom for attaching to gimbals or other compatible tripod plates. The Lower Quick Dovetail has 1/4"-20 and 3/8"-16 threaded holes for attaching to tripod plates or ARRI standard bridgeplates, such as the Wooden Camera Unified Bridgeplates.

The Unified Baseplate can also be upgraded for VCT-14 compatible mounting options. Simply attach it to the optional Unified VCT Wedge Plate, which can then be mounted on the Unified VCT-14 Tripod Plate, also sold separately. The Unified Baseplate is backward compatible with Wooden Camera's original Quick Dovetails (Standard, DSLR, and Large).

15mm Rod Support / Correct Lens Height    Vertical Rod Port (Lens Adapter Support)    Two Quick Release Options    Use with Bridgeplates, Gimbals, Etc.    Center Camera Slot for Multiple Screws    Anti-Twist, Non-Slip Rubber Surface    Upgradable for VCT-14 Mounting Options    Backward Compatible with Quick Dovetail

Parameters
Support TypeBaseplate
Grip TypeNo
Camera CompatibilityCanon EOS C200, Canon EOS C200B, Canon EOS C700
Mounting
Rod Standard15 mm LWS / 60 mm Spacing
Battery Plate TypeNo
Accessory MountingSides
Multiple 1/4"-20 Female Thread
Multiple 3/8"-16 Female Thread
Base
4x 1/4"-20 Female Thread
6x 3/8"-16 Female Thread
Camera Mounting1/4"-20 Male Screw, 3/8"-16 Male Screw
Tripod Mounting1/4"-20 Female Thread, 3/8"-16 Female Thread
Rod Ports2x 15 mm Rod Port
Shoe MountingNo
RosettesNo
General
Dimensions6 x 6 x 2" / 15 x 15 x 5 cm
Weight1.1 lb / 0.5 kg
Packaging Info
Package Weight1.125 lb
Box Dimensions (LxWxH)5.1 x 4.85 x 2.15"

  • Supports 15mm LWS rods at the correct lens height
  • Offers a vertical 15mm rod port for incorporating the optional Unified Lens Adapter Kit (for lens adapter support)
  • Includes the Core Unit, Lower Quick Dovetail tripod plate, and Dovetail Camera Plate
  • Two quick release options—remove Core Unit or remove Dovetail Camera Plate
  • Core Unit features a dovetail on the bottom, compatible with any 2060 Dovetail, Safety Dovetail, or Shoulder Rig
  • Dovetail Camera Plate features an ARCA Swiss standard dovetail and threaded holes for attaching to gimbals or other compatible tripods plates
  • Lower Quick Dovetail offers threaded holes for attaching to tripod plates or ARRI standard bridgeplates
  • Long slot along the center allows multiple screws to be attached to the camera, set up to 2.8" (70mm) apart
  • Anti-twist, non-slip rubber surface
  • Upgradable for VCT-14 compatible mounting options
  • Additional Lower Quick Dovetail and Dovetail Camera Plates can be purchased for quick swap capability
  • Backward compatible with original Wooden Camera Quick Dovetail

Related Questions and Answers

Q: 1. For compare who is the best to cinema shoot vaicam lt or eva 1?

A: Both cameras have their respective PROs and CONs, but in terms of feature sets as these apply for cinema, then the Varicam would edge out the EVA1,

Q: 2. Do you need the viewfinder to have full camera control or are there other options?

A: You need a EVF or a monitor to fully set up the camera.

Q: 3. What is difference between varicam lt and eva1

A: The varicam LT is the smaller version of the varicam 35. there are a lot of differences between the Varicam Line and the EVA-1. the varicam is a 10bit through and through camera system. the dual ISO are 800/5000 as apposed to the 800/2500 on the EVA-1. varicam is an AVC-Ultra camera that records to P2. there is a long list of differences between the cameras that can be found listed on the Panasonic cinema camera website.

Q: 4. what is the bit depth? I heard its only 10 bit???

A: The highest image quality codec the Cinema VariCam LT 4k S35 digital Cinema Camera uses is AVC-ULTRA's AVC-Intra Class4K4:2:2 10 bit. If you need 12 bit, you can upgrade to the VariCam 35. B&H does not sell it so please contact Panasonic. The camera's go for around $55,000.

Q: 5. Does anybody know if once the EF mount is removed from the LT can it be put on a Varicam 35?

A: NO you can NOT use and EF mount on the varicam 35, the mount system on the LT is strictly for the LT and future Varicam line cameras. the Varicam 35 preceded the varicam LT and is a PL mount only camera. the mount on the varicam 35 can NOT be changed

Q: 6. Can it record to the SD card without a expressP2 card inserted? Meaning can you just record pro res ?

A: You cannot. The SDXC Card slot is for Proxy recording only.

Q: 7. Does it come with the Panasonic viewfinder? Other retailers include a battery, P2 card and card reader, does B&H include these come as well?

A: This option does not include the viewfinder. It is mainly just the body. There are kits that offer further accessories that can be seen here. https://bhpho.to/2QUSczF

Q: 8. What difference between varicam lt to eva2

A: The varicam LT is the smaller version of the varicam 35. there are a lot of differences between the Varicam Line and the EVA-1. the varicam is a 10bit through and through camera system. the dual ISO are 800/5000 as apposed to the 800/2500 on the EVA-1. varicam is an AVC-Ultra camera that records to P2. there is a long list of differences between the cameras that can be found listed on the Panasonic cinema camera website.

Q: 9. Is this compatible with the URSA Broadcast Gen2?

A: Wooden Camera does not state that the Wooden Camera Unified Baseplate for URSA Mini, F55, F5 is compatible with the Blackmagic Design URSA Broadcast G2 Camera.

Q: 10. Does the camera come with an Anton Bauer battery plate?

A: The VariCam LT does come with a Gold Mount, Anton Bauer style battery connection. It does not come with a battery or charger though, we do have some nice kits from Anton Bauer and Switronix available that you may want to look in to.

18/09/2024

[Baseplate] I don't understand all the negative reviews on this item. Our Komodo has been out on dozens of shoots, including multiple tv shows, music videos, commercials and feature films, and we've never had a problem with the baseplate. It feels very solid and works well. Yes, there isn't a safety pin to holds the dovetail in, but I generally find them to be irritating anyway. Just make sure to tighten it up properly and it's extremely solid.

5
18/07/2024

[1.125 lb] This IDX V-Mount Battery Plate works perfectly for my Sony FS5. It has a very solid and professional feel to it and I love the AC cord it comes with that plugs right into the DC port on my camera. It is an awesome unit and does the job. A word of warning though. You probably better purchase now if you are needing this because the manufacturer's pricing will be going up soon. B&H has the best pricing in the world on this one.

5
11/07/2024

[Baseplate] Very well made. Fits FS7 perfectly. Lots of features/options. I love it.

5
05/07/2024

[1.125 lb] Always love buying from Wooden Camera when I can afford to. Incredible quality in everything they do. Makes working in a please when using their pieces.

5
05/06/2024

[1.125 lb] Just buy it and try it. The versatility is incredible. Tight, strong construction. Lots of options. Seems like any support gear you're going to build around your camera, this is a great foundation!

5
03/06/2024

[Baseplate] I was reluctent to buy this plate for a while because of the quick release arca swiss mecanism with no safety catch. The good news is you can actually lock the arca swiss plate with the baseplate via 2x 1/4-20 screws, preventing any accidental removal of the camera. This still lets you use the dovetail clamp as you should, which is all I need for my use.
Double locking passthrough 15mm rod mount base is a great asset.

This also pairs great with the wooden camera VCT shoulder plate for allowing to switch from the confort/efficiently of vct system when speed is priority, to the security of a dovetail mounted system when needed (steadicam, car rig...) in a heartbeat.

5
27/05/2024

[1.125 lb] The price is tough to handle, but everything I've got from Wooden Camera is incredible, and holds up over the years. Both in build quality and design. When I can afford it, love working with their pieces.

5
07/05/2024

[1.125 lb] Great, strong PL mount - SUPER easy to switch! First try and I switched my mounts in about 2 minutes. Great thing to have.

5
01/04/2024

[1.125 lb] I was torn between this and the Bright Tangerine on for my EVA1 and opted for this since BH had delays on the BT version. It's great and is versatile. I'm using it with the WC 8 Safety Dovetail and I like that it has 4 rod clamps rather than just 2 so that I can have a different set of rods in front of the camera that are easily removable. There is the issue with there being no safety catch when release the baseplate from the rail block but you would have to screw up pretty to trash a camera this way. This is an oversight though and likely a sacrifice on their part to save space and weight. Overall I'm happy.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Panasonic Varicam Lt 4k S35 Cinema Camera Ef Mount

$35,550.00 $46,570.50

Panasonic Pl Mount Adapter Varicam Lt

$4,095.00 $5,896.80

Sony Fs5 Baseplate Rig Bundle For Filmmaking

$3,324.03 $4,288.00

Wooden Camera Baseplate For Sony Burano

$1,347.00 $1,778.04

Products You May Like

Zebra Zc100 Card Printer Usb Ethernet

$6,180.30 $8,343.41

Phottix G-capsule Hexadecagon Softbox 26"

$569.85 $683.82

Cougar Mx430 Air Rgb Mid-tower Case Black

$239.97 $369.55

Zeiss Cp.3 21mm T2.9 Lens Canon Ef Mount Feet

$13,170.00 $19,755.00

Came-tv 1092b Bi-color Led 2-panel Kit

$2,238.00 $3,401.76

Alesis Command Mesh 8-piece Electronic Drum Kit

$2,397.00 $3,787.26

Lee Filters Proglass Cine Irnd Kit 4x5.65

$11,340.00 $17,010.00