Rf-Links Vrx-49 Mil 4.9 Ghz Receiver Military Use

Rf-links Vrx-49 Mil 4.9 Ghz Receiver Military Use

Product Code: eq33103
Availability: In Stock

$2,997.00 $4,255.74

Qty

7 reviews Write a review

Description
Reviews (7)

The RF-Video VRX-49 MIL is a 4.9 GHz Audio/Video Receiver designed for military and government use. This receiver can access eight channels which cover the entire frequency range of the 4.9 GHz band. Both NTSC and PAL video standards are supported by this unit. For power, it will accept 9 to 12V from a power supply or battery. Different antennas can be attached via the single SMA connector depending on use case; high-gain antennas are recommended.

Supports NTSC and PAL Formats RCA Video/Audio Outputs Operates on 4.9 GHz Frequency Band SMA Antenna Connection

Parameters
Operating Frequency	4900 MHz
Channels	8
DC Voltage	9 to 12 V
Sensitivity	-86 dBm
Minimum Required Voltage	10 V
Battery Power	12 V
Video Distortion	3%
Audio Carrier Frequencies	6 MHz, 6.5 MHz
Video Format Support	NTSC, PAL
Current Consumption	350 mAh, 12 V
Antenna	High-gain recommended
Antenna Connector	SMA
Impedance	50 Ohms
Audio Input	300 mV
Video/Audio Connectors	RCA
Video Impedance	75 Ohms
Video Level	1 V
Demodulation	WFM
Temperature Range	-40 to 172.4°F / -40 to 78°C
Dimensions	4.3 x 2.8 x 1.0" / 109 x 71 x 25 mm
Weight	3.5 oz / 100 g

Related Questions and Answers

Q: 1. audio channels?

A: The audio outputs on this device through RCA. You would just need basic RCA Male to Male cables.

Q: 2. Will this help when experiencing interference from concrete and steel walls?

A: Yes, the Teradek Antenna Array for Bolt 4K 4.9-7.3 GHz can be used to allow for much greater distance or amplify the RF signal when encountering difficult wall types.

Q: 3. Is the there a floor standing mounting pole for this?

A: Yes, the Teradek Antenna Array for Bolt 4K 4.9-7.3 GHz (V-Mount) mounts easily to any stand with a junior pin.

Q: 4. When using with the Bolt 6 LT, does the range of the receiver (either 750 or 1500) impact the range (5000) of the array?

A: The Teradek Antenna Array for Bolt 4K 4.9-7.3 GHz (V-Mount) can be used with the Teradek Bolt 6 LT HDMI 750 Transmitter/Receiver Kit, and the product provides a robust and uninterrupted directional signal, but the range will still be limited to that of the bolt set.

Q: 5. SMA or RP-SMA? How long is the cable?

A: This antenna is SMA male connector and it comes with a 10ft. wire.

Q: 6. Is this compatible with Ranger?

A: The Teradek Antenna Array for Bolt 4K 4.9-7.3 GHz (V-Mount) (B&H# TE110888V) is compatible with the Bolt 4K 4.9-7.3 GHz, and its antennas are tuned to those frequencies. The Ranger series uses a slightly different frequency range and thus would not be compatible.

Q: 7. Video stability. Is the video stable?. Looking at a possible use for sending teleprompt video to a steadicam

A: Yes this is supposed to provide stable video transmission. It has a transmission range up to 600 ft line-of-sight.

Q: 8. Which version of bolt does this work with ?

A: The Teradek Antenna Array for Bolt 4K 4.9-7.3 GHz (V-Mount) is designed to work with the Teradek Bolt 4k.

Q: 9. This is working for Bolt 6 LT as well?

A: The Teradek Antenna Array for Bolt 4K 4.9-7.3 GHz (Gold Mount) is compatible with the Teradek Bolt 6 LT HDMI 750 Wireless Receiver, the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless Receiver (Gold Mount), the Teradek Bolt 6 LT 1500 3G-SDI/HDMI Wireless Receiver (Gold Mount), and the Teradek Bolt 6 LT MAX 3G-SDI/HDMI Wireless Receiver.

Q: 10. Can I use this with the Bolt 6 LT ? If so, does the range of the receiver (either 750 or 1500) impact the range of the array?

A: Yes, the Teradek Antenna Array for Bolt 4K 4.9-7.3 GHz (V-Mount) can be used with the Teradek Bolt 6 LT HDMI 750 Transmitter/Receiver Kit. The product provides a robust and uninterrupted directional signal, but the range will still be limited to that of the bolt set.

John	24/09/2024
[50 Ohms] The receiver has all the functionality needed to capture high quality portraits. 5

Ron	01/09/2024
[12 V] This little gem is a pure joy to use. The only way I can describe the change in the photo taking process that this accessory brings about when using a pod is freedom. It actually feels strange at first not needing to be glued to the camera, but able to walk away and shoot from a distance. I'll leave it to you the reader to imagine the different situations where that would prove to be an advantage. Photographing wildlife is probably the most obvious. Another way I use it is in shooting seascapes where I can go sit in a comfortable spot and pick my shots as the breakers roll in. The only learning curve you might possibly need to experience is remembering to turn both members off when you're finished. Either that or carry a good supply of AAAs. Oh yeah, and dont forget to close off your viewfinder. 5

Harold	05/08/2024
[75 Ohms] I’m glad I finally got this. It works every time. Easy and the price is reasonable 5

Kevin	04/07/2024
[10 V] Works well with the transmitter set I had previously bought. I can't get enough of these things, have 4, will be getting more 5

Kevin	26/06/2024
[SMA] They work well and are cheap! 5

James	15/06/2024
[9 to 12 V] I have bought a number of these Vello Transmitters and receivers and they all work great, no problems so far. 5

Lamchop	12/04/2024
[SMA] Bought the Vello FreeWave Fusion Basic Wireless Flash Trigger System for Nikon Cameras and bought this additional receiver for my strobe light needs so I can have my key and fill light being controlled remotely, worked like a charm. 5