Icc1-Irx 1-Way Rf Coax Ir Tv Controller

Icc1-irx 1-way Rf Coax Ir Tv Controller

Product Code: eq33167
Availability: In Stock

$2,361.00 $3,163.74

Qty

16 reviews Write a review

Description
Reviews (16)

The Contemporary Research ICC1-IRX IR TV Controller provides one-way control over power, volume, and NTSC/HDTV channel tuning on your IR format TVs, LCDs, and Plasma displays. It receives iCC-Net network commands over the same broadband coax that carries the CATV channels. This compact unit can be networked with up to 4,000 displays using the Contemporary Research head end units.

The ICC1-IRX IR TV controller features power current sensing using the Xantech CSM1 sensor (not included). It is suitable for applications that include signage and video distribution for schools, colleges, sports venues, corporates, places of worship, and entertainment spaces.

Parameters
Control Options	Discrete IR control Power, channels, inputs
Database	Control Database: On-board commands for most display makes and models, network selectable
Tuning	NTSC and HDTV channels
Data	Data Receive: Mid-band VHF, 74.7 MHz, sent from ICC-HE Ethernet Head End Signal Level: -25 to +35 dBmV
Connectors	RF In: 'F', female, RF from CATV system, iCC-Net control Impedance: 75 Ohms RF Out: 'F', female, RF to TV, less than -1.5 dbmV loss Impedance: 75 Ohms IR Out: 3.5 mm jack for CC-IRE IR Emitter cable or compatible CC-IRS serial cable Supports carrier frequencies up to 62 kHz Power Sensor: 3.5 mm jack for optional CC-HSD scan sensor Logic level input, switch to GND to signal power on CSM1: 3.5 mm jack for power and data from Xantech CSM1 power current sensor Power In: 2.1 mm coaxial jack (inside center conductor positive), 75 mA maximum
Switch	DIP Switches: S1 and S2, located on base, sets IR code operation and device number
Indicator LEDs	Net: Green LED for iC-Net bus and DC power, flashes once per second if active IR Out: Red LED lights when sending IR commands Power Sensor: Red LED lights when sensor indicates power on
Enclosure	All aluminum with durable black powder coat paint
Mounting	Mounts to rear of the TV
Power	11.5 to 16.5 VDC, 12 VDC typical (may be unregulated)
Dimensions	5.5 x 1.1 x 3.4" (140 x 28 x 3.4 mm)
Weight	8 oz (226 g)

Controls most brands of IR-controlled TVs

Sends IR commands for discrete power, on and off, analog and HD tuning, and volume

Manages channel access by changing the TV's internal available channel list

Delivers power control using the optional Xantech CSM1 power current sensor, or optional CC-HSD scan sensor for older tube TVs

Networks up to 4,000 TVs through the ICE-HE Ethernet Head-End (not included)

Receives one-way individual and zone commands from a single RS-232 port on the Head-End

Operates over same RF coax cable as CATV channels

SmartZone architecture controls hundreds of controllers with a single command

Low-loss internal RF tap saves amplification and installation costs

Provides LED feedback for network, IR control, and power status

Restores all power and channel status after loss of power from the on-board database

Mounts on the back of the TV for simplified control and RF installation

Operates with Contemporary Research Display Express software as well as from RS-232 protocol from a custom-programmed PC or control system

Related Questions and Answers

Q: 1. Do you need a moca filter on coax coming into house?

A: You will need to install one unit near your router and one near your mesh or device units when installing the ASUS MA-25 MoCA 2.5 Coax to Ethernet Adapter (2-Pack) BH #ASMA252PK.

Q: 2. does this filter help in astrophotography if the camera is not modified?

A: The Kolari Vision UV/IR Cut H-Alpha Pass Magnetic Clip-in Filter is not recommended for use in an unmodified camera.

Q: 3. Can I use F-connectors with this cable? I want to put an over-the-air antenna on my barn and run it 150' back to the house.

A: Yes, the Belden RG59 Digital Video Coax Cable (1,000', Black) is a 59/U cable which is suitable for F-connectors.

Q: 4. Will this device allow me to attach one directional antenna together with two diversity receivers for wireless microphones ?

A: You would need two of each for two receivers. Each receiver needs two separate antennas. So you would not need a 4-way splitter to do this. Two 2-way splitters would do the job if you have 2 antennas. The part number for a 2-way splitter is ZSC24.

Q: 5. Is this clip in filter 12nm or 7nm?

A: The only information Kolari Visions lists on the Kolari Vision UV/IR Cut H-Alpha Pass Magnetic Clip-in Filter for Canon RF-Mount Cameras is, https://bit.ly/3GUpzNi .

Q: 6. Is this very flexible cable. I want use it on eng and filed production

A: The Belden RG59 Digital Video Coax Cable (1,000', Black) has a bend radius of 2.3 in and can be used in your applications.

Q: 7. will it work for MADI?

A: You will need to contact the manufacturer directly for this question. They can be reached at 718-567-8181.

Q: 8. I have four 411a receivers. Would this allow me to connect them all to two Betso Bowties or other external antenna?

A: It will, but this is a 1x8 splitter, so you would need one for each of the two antennae.

Q: 9. Hi, it says is for 8 fixtures...does it mean 8 different effects fixtures or 8 fixtures of the same kind?

A: They can be different LED fixtures that are DMX compatible.

Q: 10. How many watts can through POE can they extend?

A: The Vigitron VI2401A MaxiiCopper 1-Ch High-Speed Ethernet Extender-over-Coax has POE support for EEE 802.3af 15w and IEEE 802.3at 30w. The Distance (with POE) is 3000ft (10BaseT) and 1800ft with 100baseT data rates.

Oliver	24/09/2024
[8 oz (226 g)] It holds 6-7 cards plus 4-5 notes. Easy to access any card you need while keeping the overall thickness very low. Like the design. 5

Ryan	14/09/2024
[8 oz (226 g)] Works perfect. Great signal, wide range of frequency. This costs more, but when you need a good signal, this kind will work better. 5

Dee Dee	03/09/2024
[8 oz (226 g)] This is a fun way to add some colorful creative effects to your instant photography. The look can range from subtle to very pronounced depending on your subject and which filter you use from this pack. I say if you like the samples shown on the product package, you'll probably have a lot of fun with this. Included are two photos I made, one with the Austin filter and one with the Northern Lights filter. 5

Adam	25/08/2024
[8 oz (226 g)] Used this for a elevator camera conversion. This allows you to use a single BNC coax cable to power and connect a Ethernet POE camera. You only need to supply 24vdc to the near end converter. It also extends the operational distance limitations. very nice 5

Allan	22/08/2024
[8 oz (226 g)] Excellent product for platinum printing! 5

Bruce	14/08/2024
[8 oz (226 g)] This splitter was just what I was looking for. Works perfectly for splitting the signal coming out of my wall to two different cable boxes 5

Kelli	11/08/2024
[8 oz (226 g)] I use this as an alternative to selenium for warmer tones. Has always worked great for me. 5

anyonymous	26/06/2024
[8 oz (226 g)] Product works great, used the product for my PVR which is dual frequency without any issues. It's best to be straight on to the receiver when setting up as much as possible. 5