This 16' Profoto D2 Power Cable 16' Australiaprovides AC mains power to the D2 500 and 1000 monolights. The plug is configured for use in Australia.

Provides AC Power to D2 Monolight

Related Questions and Answers

Q: 1. Can the Profoto D2 1000 Air TTL be connected to an external power pack, and if so what type?

A: The Profoto D2 1000Ws AirTTL Monolight is designed for AC power usage. If you wish to use the strobe on location, you would need to purchase a power inverter strong enough to handle the above strobe. As a recommendation, I would recommend either the Photogenic Ion Lithium-ion Pure Sine Wave Inverter System, B&H # PHION, which should give you approximately 360 flashes per charge with approximately 7.5 second recycling time, or the Hensel Power Max L Lithium Mobile Power Supply (120VAC), B&H # HEPML120, which should give you approximately 220 flashes on a single charge with the recycling time 50% longer than your current recycling time when plugged into a standard AC household outlet.

Q: 2. At what power levels is high speed sync available at in these heads? Is it like the B1 where you have to be at least 7.0 for high speed sync? Or can you use high speed sync at lower power levels?

A: It has a slightly expanded range starting at 6.0.

Q: 3. Hello its only for Canon or its for Nikon also ???

A: It can be used with Canon, Fuji, Nikon, Olympus and Sony cameras.

Q: 4. Would this cable work with a Profoto D1 1000w Air Monolight?

A: yes!

Q: 5. Is this the cable that comes standard with the D2?

A: Yes, the Profoto Power Cable for D2 (16', US / No. America) is the original power cable designed for use with both the Profoto D2 500Ws AirTTL Monolight or the Profoto D2 1000Ws AirTTL Monolight.

Q: 6. I want to purchase this kit. I'm just wondering if I will be able to use it together with 2 SB-910 Nikon flashes using the Profoto Air Remote TTL-N. Do I need to purchase anything on top of these to make it work?

A: If you purchase the Profoto universal Transceiver for @ SB-910 or use the Optical slave in the SB-24

Q: 7. What sync cable is compatible?

A: The Profoto D2 1000Ws AirTTL Monolight uses a standard 1/8" (3.5 mm) sync terminal on the monollight light fixture. The sync input is located on the bottom of the unit as pictured on page 9 of the Profoto D2 1000Ws AirTTL Monolight's included instruction manual (labeled as #14 in the image). If you are looking for a recommendation, the Profoto Sync Cable for D1 Monolight, B&H # PRSCD1, or the Impact Sync Cord Male Mini (3.5mm) to Male PC (16'), B&H # IMMMPCM16, would both be compatible for your usage needs.

Q: 8. To sync, can I use the radioflash from other brands or only Profoto?

A: Using the Profoto air remote would be the most useful as the D2 has a Profoto receiver built into the head. However if you wanted to use a different transmitter and receiver, you could as there is a 3.5mm sync port on the D2.

Q: 9. What portable battery can I use. I shoot mostly on location

A: I used the MiniVagabond, it worked fine but there are limitations if you want to use HSS. Will require you to shoot in low power mode which results in a slower power recycle.

Q: 10. Can these be used with Pocket Wizards?

A: Yes they can. There is a mini phone plug on the bottom and can be used with any remote trigger or wired. You will lose TTL, HSS and remote control ability by using a Pocket Wizard.