Altronix Din Rail Relay Base Module 24Vdc

Altronix Din Rail Relay Base Module 24vdc

Product Code: eq33736
Availability: In Stock

$52.50 $84.00

Qty

16 reviews Write a review

Description
Reviews (16)

RDC24 is a DIN rail mountable relay which is designed for continuous duty. This rugged, reliable and dependable relay will handle any switching application.

Physical Characteristics
Height	2.4"
Width	1.4"
Depth	2.7"
Weight	6.08 oz
Miscellaneous
Environmentally Friendly	Yes
Environmental Certification	RoHS
Packaging Info
Package Weight	0.22 lb
Box Dimensions (LxWxH)	4.55 x 2.2 x 1.55"

Input Voltage:

24VDC operation
Current draw: 43mA

Contact Rating:

10 amp/220VAC or 28VDC DPDT contacts

Electrical:

Operating temperature: -25° C to 55° C ambient

Related Questions and Answers

Q: 1. HiI would like to know:1. Is this model comparable with the iPhone 8/8plus?2. Shipping costs to Israel?

A: This should work fine with an iphone 8, no problem. Just add the desired itemto our on-line cart system to calulate shipping charges and details.

Q: 2. Is the 1200 MAH internal battery user replaceable? All batteries die sooner or later.

A: It is not replaceable.

Q: 3. Does it fit a bicycle handlebar?

A: This would depend on the handlebar. If the diameter of your handlebar is between 1.57 - 3.15 , then yes.

Q: 4. will it work for MADI?

A: You will need to contact the manufacturer directly for this question. They can be reached at 718-567-8181.

Q: 5. Can this item be shipped out of the US?

A: Yes. We can ship this RDL product outside the USA.

Q: 6. Does this Case Relay include the CRUPS110 adapters including the Nikon 4 pin adapter?

A: The $99.99 price includes only the power system. You can select the correct adapter for your camera, and the package will include it at additional cost.

Q: 7. Is the 2.5mm end type A or type B?

A: Information about the CME WIDI DIN-5 MIDI Cable's wiring has not been made available by the manufacturer. It is intended to be used with the CME WIDI Jack Wireless MIDI-Over-Bluetooth Adapter, which allows switching between Type A and Type B.

Q: 8. Can each port be configured to be a single universe so port 1 is universe 1, port 2 is universe 2, etc? Or are all ports the same universe?

A: Yes you can configure it that way

Q: 9. What is the distance between the two 1/4-20 holes, center to center measured in mm?

A: The distance between the two 1/4-20 holes on the FREEFLY NATO Rail Clamp is approximately 18mm center to center.

Q: 10. Is there a way to split the Timecode from the Ultrasync to two outputs?

A: You can use a distribution amp like this: https://www.bhphotovideo.com/c/product/1281342-REG/aja_c10da_analog_video_1_x.html

Yousef	27/09/2024
[6.08 oz] build quality is really good, and it works as it supposed to be 5

Alvin	14/09/2024
[0.22 lb] I use this for powering a, line audio in / multi line out amplifier for feeding multiple recorders. Until now I've had to use two, 12 VDC, batteries wired in series to power it since I just couldn't find a small (inexpensive) 24 VDC power supply. This works perfectly and seems to be very clean DC since I cannot detect any 60 HZ hum in the audio signal. 5

Joseph	09/09/2024
[6.08 oz] Great build quality l, easy to use. Phone is extremely secure and the placement is limitless 5

Gary	26/08/2024
[RoHS] This was a direct replacement for one that was 5 years old and didn't survive a bad thunderstorm. Install took no time at all and now it's out of sight, out of mind - the way it should be. Delivery was very quick as well so our downtime was ultimately not bad at all. 5

Richard	14/08/2024
[1.4"] Showed up before delivery date, great service 5

Bob The Amateur	02/08/2024
[6.08 oz] Great mount, it has the ability to move into every position you need. Quick release to remove for safe keeping. So happy with it. 5

Loop	17/07/2024
[6.08 oz] The ALTRONIX StrikeIt2 was exactly what we needed for our Door Access system. The box is just the right size for the board and an eventual battery. B&h was able to ship this to us next day, to help with a critical project. 5

Adam	03/07/2024
[1.4"] Used this for a elevator camera conversion. This allows you to use a single BNC coax cable to power and connect a Ethernet POE camera. You only need to supply 24vdc to the near end converter. It also extends the operational distance limitations. very nice 5

Christopher	27/06/2024
[1.4"] Purchased to replace a dead 8-channel power supply (also had a few power bricks to eliminate on that setup.) Does exactly what I needed it to do: provide power to 16 analog cameras. The individually-fused outputs are a nice touch, as (now) one shorted camera won't take out the entire surveillance system. 5

Bob The Amateur	26/06/2024
[1.4"] I use this mounting kit on my Harley Davidson Motorcycle. It is the best phone mounting kit I have ever used. I love it. 5