Bring all of your Canon TTL flashes into the Nissin Air R Receiver Canon Flashes SEO TitleAir System with 2.4 GHz radio transmission by mounting them to the Air R Receiver . Using an Air 1 Commander for the Canon E-TTL / E-TTL II system and the Air R Receiver, photographers can now set up and control numerous flashes in an off-camera setup at distances up to 98'. The receivers add wireless slave TTL functionality with support for high-speed sync up to 1/8000 second, manual power control, and manual zoom, with the ability to select between eight channels and organize three groups.

Connecting to a TTL flash is simple as the receiver has a hot shoe on the top for communication. For strobes and manual flashes, the Air R also has a PC sync terminal for basic connections. Mounting the receiver is simple as well with a cold foot on the bottom with a 1/4"-20 thread for stands. There is also a flip-out stand for placing directly on a flat surface. Additionally, it runs on two AAA batteries.

Nissin Air 2.4 GHz Radio TTL System    For Use with Air 1 Commander    Compatible with Canon E-TTL / E-TTL II    Wireless Slave TTL Functionality    Triggering Range: 98'    Eight Channels & Three Groups (A, B, C)    Flash Sync Speed up to 1/8000 Second    Hot Shoe & PC Sync Terminal    Foot with 1/4"-20 Thread; Flip-Out Stand    Runs on 2 AAA Batteries

Related Questions and Answers

Q: 1. Can this be used with an einstein strobe, and if so can i use hss? I have the nissin air commander and di700 flash and would like to use both together with shutter speeds 1/200.

A: No, Amy, it can't. The way Sony's HSS protocols work, the signal is transmitted via a TTL command that's only accessable from a MI compatible shoe. You will have to buy a transmitter made by your strobe manufacturer with a MI shoe.

Q: 2. Could I use the Nissin Air 1 Commander for Fuji Cameras on my X100F in conjunction with the Nissin Air R Receiver for Canon Flashes attached to my Canon Speedlite 430EX III-RT ?

A: Unfortunately, this receiver can only be triggered by a Nissin Air 1 Commander for Canon.

Q: 3. Can I use a sony version air 1 controller to Manually fire a SB900/Mitros+ mounted on this product? Seems Nissin's system is able to cross-platform for manual power setup.

A: No, this will not work. When using the Nissin Air R receiver, it must be paired with the like Air 1 Commander. So if you are using a Sony Air 1 Commander it must be paired with the Nissin Sony Air R Receiver. Likewise with Canon and Nikon.You can use the Air 1 Commander cross platform only when you pair the commander with a Nissin flash that has a built in receiver. So, you could pair the Nissin Air 1 Commander from Sony with a Nissin Di700A for Nikon because the receiver is built into the flash. This will be the same case with the upcoming Nissin i60A flash.

Q: 4. Will the Air R work with the Sony HVL-60M and a Nissin Air 10s that's mounted on a Sony A7 Riv ?

A: Yes, the Air R receiver for Sony can fit the bottom of the HVL-F60M flash so it can be triggered by the Air 10S trigger mounted on the Sony A7R IV.

Q: 5. can you use high speed sync with this system?

A: No, this system does not have high speed sync.This model can do high speed sync but it does not do groups like the viper.hahnel Tuff TTL Flash Trigger For Canon CamerasB&H # HATTWTC ? Mfr # HL-TUFFTTLhttp://bhpho.to/QA3wA1

Q: 6. What is the max sync speed? I need 1/250sec

A: Because your camera uses TTL, this will duplicate just as if your speed light is on camera. I have noticed that when this set up is used, it automatically switched my camera to Manuel flash. You're going to control your speedlight output using the controls on the transmitter. Really nice set up without spending Pocket Wizard money.

Q: 7. Hello. I have a basic manual flash which supports S1 and S2 modes. Can I use this receiver to sync with my Nissin i60A in HSS mode? I have the air 1 commander. Thank you.

A: Using the Manual flash on the Nissin Air receiver will not give you HSS in the S1 or S2 setting.

Q: 8. So, are these TTL with Canon (5D3/1Dx/7D etc. and EF lenses)? There is a reference to a TTL pass through shoe but no outright TTL description as in the general non-Canon version of the Hahnel triggers.Thank you.

A: The transmitter does not transmit TTL data to the receivers, only to the flash mounted on it while it's on the camera. This is not a wireless TTL system but does allow you to control the power of the flashes wirelessly.

Q: 9. Presently I have a Metz Mecablitz 64 for Nikon and a Nikon D610. Will the Air R allow use of TTL radio control of the Metz by the 610 (with, of course, the updated firmware Nissin Air 1 installed on the 610)?

A: Since the Air R Receiver works with Nikon compatible flashes with i-TTL capability, it could work with the Metz Mecablitz 64AF-1 for Nikon. However, we are not aware of any tests that confirm this.

Q: 10. Which Nissin flashes does the Nissin Air Commander directly interface with, without the Air R?

A: Right this minute, the Air 1 interfaces only the DI700 (GN 54). However, the i60 (GN 60) is due out any day now to a month or two depending on what camera lens mount you have.