The 24" IndiPRO 12V D-Tap to Blackmagic Mini Power Converterfrom IndiPRO 12V D-Tap to Blackmagic Mini Power Converterenables you to power your Blackmagic Mini Converter using a 13 to 17V battery with a D-Tap connector. It converts the 13 to 17 volts to regulated 12V with a 2.5-amp rated draw, providing a safety margin for the Blackmagic Mini Converter. Use this converter with a D-Tap–equipped pro-style battery to obtain a longer run time than that provided by the camera's internal battery.

Power Camera Using a D-Tap Battery    Converts 13 to 17V to Regulated 12V    24" Cable Length

Related Questions and Answers

Q: 1. Does it work both ways?

A: No! Source is P-tap output is push connector

Q: 2. Will this work to power the FeelWorld FW759 monitor taking the power (plugged) from the Switronix Powerbase 70 (for the BMCC)?

A: More than likely this will not work. It is designed to power a BMD Cinema Camera specifically, not accessories for the Cinema Camera. However the FW759 has a battery plate for NP-F style batteries. You could try the IndiPRO Tools D-Tap to Sony L-Series Power Converter (B&H #INPTS74) to power the monitor with a battery that has a D-Tap port instead.

Q: 3. Will I be able to power a Sony XF3 and an Atomos Ninja V with this?

A: Yes. The following unit will power up several d-tap devices for days.

Q: 4. Does it works with sdi extreme iso ?

A: Yes, the Blackmagic Design Power Supply for ATEM Mini Extreme (12V, 60W) will power the Blackmagic Design ATEM Mini Extreme ISO, which also runs on a 12v current.

Q: 5. does the 2 pin work with blackmagic Pyxis 6k?

A: The LanParte Regulated D-Tap 12V Power Cable for Blackmagic Pocket Cinema Camera 4K (17.3") would not be compatible with the Blackmagic Design PYXIS 6K Cinema Box Camera, as it uses a 2-Pin LEMO standard connection. A recommended option would be the Kondor Blue D-Tap to LEMO 2-Pin 0B Male Power Cable (Coiled), BH #KODTAPLEMO2P.

Q: 6. Will it work with Blackmagic Video Assist 12G 7in. version? Planning on using this with Wooden Camera WC V-Mount (Dual D-Tap).

A: While the IndiPRO Tools 24" Power Cable, P-Tap to Blackmagic Cinema Camera would work with the Video Assist 12G, we have a better recommendation listed below with a locking connector. Kondor Blue Coiled D-Tap to Locking DC 2.5mm Right-Angle Cable (16 to 50") BH #KODCTAP25LCK

Q: 7. Does this work with the HyperDeck Studio HD Mini's?

A: No, the best choices for the Black Magic Hyperdeck Studio HD Mini are listed below. Non-Locking Blackmagic Design 12V Power Supply for Select Hardware BH #BLPSUSP Locking Blackmagic Design International Power Supply for Video Assist 12G (12 VDC, 36W) BH #BLPWRSPVA12G

Q: 8. Will this work with Blackmagic Production 4k camera?

A: Yes, this cable is compatible with the Blackmagic Cinema Camera 4K.

Q: 9. Will this work directly with a Switronix battery for a BMCC without the regulator of the battery?

A: This device converts 12 to 18 volts to regulated 12 VDC and is rated for a 3-amp draw at 12 volts, which provides a safety margin to the Blackmagic Cinema Camera and Production Cameras. This unit has a regulator on it.

Q: 10. Does the 2pin work with Blackmagic Pyxis 6K?

A: No, the LanParte Regulated D-Tap 12V Power Cable for Blackmagic Pocket Cinema Camera 4K (17.3") will not support the new Pyxis cameras. Please work with the cable below. Kondor Blue D-Tap to LEMO 2-Pin 0B Male Power Cable (Coiled) BH #KODTAPLEMO2P