The black Camera Body Armor from Porta Brace is a snug-fitting cover that protects the Panasonic AG-AC130 camcorder from bumps, hits, and scratches. It is made of a water-resistant, highly abrasive-resistant, soft-feel fabric. It also reduces the risk of camcorder damage due to precipitation, dust, and other harsh conditions.

The interior side of the fabric has a mesh finish to improve airflow around the camera. This cover has a quick-access rain/dust cover that fits into a convenient slip-pocket. It also features a webbing tab that fastens to the slot on the lens cap. The Camera Body Armor is held onto the camera by touch fasteners and web cinchers.

Panasonic AG-AC130 camcorder
 

Non-abrasive, durable material

Custom-fit, full access to controls

Built-in rain top

Slight padding helps camera absorb shock from bumps

Related Questions and Answers

Q: 1. Will this work with ROP app?

A: Yes, the Panasonic CX ROP App is compatible with the AG-CX350.

Q: 2. Does this has an opening for the LCD screen to come out and an area for input wires to go in when cover is closed

A: This cover offers a clear vinyl window and an opening along the bottom of the cover. However you will not be able to remove the LCD screen from the case, nor would that be advised. You would want to leave the LCD in the cover and either view it through the window or, which would be the optimal choice, use the viewfinder instead.

Q: 3. how would this compare to MKE 600 or AT875R ?

A: In terms of specifications, the three mics do have differences in the way they perform, how they are powered, as well as in their physical size and features. The Panasonic AG-MC200G Unidirectional Microphone is 6.38" (162 mm) long and has a frequency response range of 160 Hz to 20 Hz, a maximum sound pressure level of 127 dB, a sensitivity level of -40 dB at 1 kHz, a signal-to-noise ratio of 69 dB, and operates using phantom power. The Audio-Technica AT875R Short Shotgun Microphone is 6.89" (175 mm) long and has a frequency response range of 90 Hz to 20 kHz, a maximum sound pressure level of 127 dB, a sensitivity level of -30 dB at 1 kHz, a signal-to-noise ratio of 74 dB, and operates using phantom power. The Sennheiser MKE 600 Shotgun Microphone is a longer mic that can operate using either phantom power or a single AA battery and it has a selectable low-cut filter at 100 Hz to roll off low-frequency noise from common sources such as air conditioners and traffic. The MKE 600 is 10.08" (256 mm) long and it has a frequency response range of 40 Hz to 20 kHz, a maximum sound pressure level of 132 dB when using phantom power and 126 dB when using battery, a sensitivity level of 21 mV/Pa with phantom power and 19 mV/Pa with battery power, and a signal-to-noise ratio of 79 dB with phantom power and 78 dB with battery power. The frequency response range is the output range for the audio that the mic is able to reproduce and the maximum sound pressure level is the level of the loudest sounds that the mic can reproduce. The sensitivity rating is the amount of output gain for the input (a higher negative number indicates that the mic is less sensitive than a mic with a lower negative number), and the signal-to-noise ratio is the level of the desired sound compared to the unwanted noise (a higher number indicates a stronger audio signal with less noise).

Q: 4. I have a JVC GY-HM170UA camera and bought this microphone, but the camera does not recognize, all possible tests and still the same. Can anybody help me?

A: The Panasonic AG-MC200G requires 48 volts phantom power to operate. The camera must be set to the MIC+48 setting to power the mic correctly. If you are having issues with your purchase, please feel free to contact a Sales Representative here by phone at 800-606-6969 or email audio@bandh.com for assistance

Q: 5. What are the interior dimensions?

A: The dimensions are approximately 8 x 10 x 18 .

Q: 6. How does the LCD compare to the UX-180 in direct sunlight? I film mostly outdoors and the 180 isn't good enough.

A: The LCD of the Panasonic AG-CX350 4K Camcorder will preform very similarly to the LCD of the UX-180, both of which are not intended for use in direct sunlight. You may want to consider using an external monitor with a brighter output or put a sun hood like BH #HOHD350.

Q: 7. Is the frame of this bag rigid or semi-rigid?

A: This bag is semi-rigid

Q: 8. Can the LCD be used when the cover is on?

A: No, this is designed so that the viewfinder is used; not the LCD.

Q: 9. What's the weight rating of the side tripod holder? Can it take the weight of a Manfrotto 504HD head mounted on 535 carbon fiber legs?

A: The combined 504HD and 536 carbon fiber legs weigh about 11 lbs, not a problem for the tripod pocket. However, the closed length of the tripod and head is 35 which is way too long. We suggest a separate carry case for the tripod or a smaller tripod.

Q: 10. Will the CS-HCX2 case hold the Panasonic HC-X2 with the rubber eyecup on the camera or does the eyecup need to be removed?

A: The PortaBrace Camera Case for Panasonic HC-X2 or HC-X20 (Black) will have plenty of room for the Panasonic HC-X2's eyecup if installed on the camera. The eyecup does not need to be removed when storing in the Portabrace BH #POCSHCX2 case.