Arkay Premium Stainless Steel Photo Sink 30X60

Arkay Premium Stainless Steel Photo Sink 30x60

Product Code: eq3440
Availability: In Stock

$5,918.85 $8,523.14

Qty

5 reviews Write a review

Description
Reviews (5)

The Arkay Premium Stainless Steel Photo Sink 30x60are constructed from 18 gauge type 316L stainless steel, heliarc welded into one solid piece, then ground, polished, and passivated to provide the ideal protective surface for photographic chemicals.

An optional heavy gauge, charcoal grey stand & shelf as well as a choice of 5 or deluxe 10" backsplash's are available

Parameters
Construction	18 gauge type 316L stainless steel
Capacity	Holds up to 4-11 x 14" or 3-16 x 20" trays
Drain Location	Right Rear
Water requirements	No
Stand	Optional
Temperature Control	No
Interior Dimensions	30 x 60 x 6"
Outside Dimensions (WxL)	33 x 63"

The inside corners of these sinks have 3/4" radius coved corners leaving dirt no where to hide

The gauge of these models is thicker, more rugged, and longer lasting then other standard gauge steel sinks providing superior temperature holding ability

These sinks feature square corners

Each sink is painstakingly crafted to your exact specifications

The optional 38" self-supporting sink stand also has that rounded and polished look of craftsmanship and quality.

All sinks are undercoated for sound insulation and condensation prevention

Related Questions and Answers

Q: 1. I'd be using this in a small space. Does anyone know the footprint/diameter of the base when in use? Thanks!

A: The foot print of Neewer Stainless Steel C-Stand with Casters 2.16 feet / 0.66 meters.

Q: 2. What width strap do they fit?

A: They an approximate width of 1/2".

Q: 3. How much liquid should I be putting in for one spool of 35mm film?

A: The easiest way to find the amount needed would be to put the empty film reels into the tank. Then you may pour water into the tank until the reel is completely covered. You may then pour the water from the tank into a measuring graduate or a measuring cup. You may then use the listed amount as your measurement for developing your film. As a rough guestimate, you may use approximately 240 mL (roughly 8 ounces) of fluid.

Q: 4. I don't understand the metal attachment bars just above the wheels. Why do they stick out so far? They're about to ding walls.

A: The metal bars above the wheels of the Neewer Stainless Steel C-Stand with Casters and Boom Arm (10') are locks that are necessary for safety when using this stand on wheels.

Q: 5. How much chemistry do you use? At this small level is the chemistry strong enough to develop the film?

A: Use 300 ml of chemistry in this tank. This is pretty much standard for 35 mm film tanks like the Patterson, and others. Rodinal at 1+50, HC-110 at 1:31, DD-X at 1+4, all work well in this tank at 300 ml. I would recommend the Hewes reel as some of the other stainless reels are cheaply made and not very good.

Q: 6. What is the diameter of the funnel at the top rim and how long is the tube that is inserted into a jar or bottle?

A: The diameter of the funnel at the top rim is 5 3/4 inches and the funnel is 3 1/2 inches long.

Q: 7. Will this fit through the eyelet on a Fujifilm X 100 F?

A: This will fit the eyelet of any camera including the Fujifilm X 100 F.

Q: 8. How long is the provided USB cable?

A: The length of the USB cable included with the Earthworks Icon USB Streaming Microphone is not specified by the manufacturer, however it is likely in the common range of three to six feet in length.

Q: 9. will this clamp around a 30mm tube?

A: The Global Truss Light-Duty Stainless Steel Clamp (35mm) will not clamp around a 30mm tube. The specs say that it will fit 32 to 35mm tubes.

Q: 10. Are these stainless steel or aluminum? The title and material specs are different.

A: Yes, the following 15mm rod are made of stainless steel material.

Richard	09/08/2024
[33 x 63"] The stainless steel sink pan replaced a somewhat battered fiberglass sink. It arrived sooner than I expected. It looks great and it seems to be very well built, It dropped easily into the same Arkay sink stand that previously held the fiberglass sink that it replaced, and fit perfectly. The sink pan was quite expensive, but I now look forward to many years of trouble free use. 5

Chrisg	25/07/2024
[33 x 63"] This is the best Leatherman tool around. I've had the Surge since it came out years ago and the Super before it came out. The scissors are amazing, I also add the eyeglass screw driver. The original Surge came with the small eyeglass screwdriver which I've removed the leather punch from the new Surge's. That's my only gripe, but at least I can still add it afterwards. Otherwise it's on my side everyday and used daily. 5

John	09/06/2024
[33 x 63"] I do maintenance work at a zoo plus work on boats and cars. The pliers on the Surge is what sold me on them and they work up to my expectations. Plus of all the Leatherman tools the Surge has the best wire crimping capabilities. I like the ability to change out saw blades on the tool and I have purchased some longer metal and wood files to use when needed based on the job. The only thing that I am not really happy with is the wire stripper, in my opinion the knife does a faster job of stripping the wire. If I have a lot of wires to strip I am going to use a tool designed for that purpose but the Surge can do it in a pinch. I would also suggest to get the bit extension when you buy this tool. The extension will give you the capability to use standard bits (get double sided bits or longer bits because the standard size bits will be hard to pull out of the extension. The other feature of the Surge that I really like are the oversized scissors which are the largest of any Leatherman multi-tool. B&H did a great job of getting me this tool on time in original manufacturers packaging. 5