Owon Hds-N 2-Channel Digital Oscilloscope 60 Mhz

Owon Hds-n 2-channel Digital Oscilloscope 60 Mhz

Product Code: eq34494
Availability: In Stock

$1,797.00 $2,282.19

Qty

12 reviews Write a review

Description
Reviews (12)

Visualize electrical waveforms to test and debug circuits with the OWON HDS-N 2-Channel Digital Oscilloscope 60 MHzfrom OWON Technology. This 2-in-1 oscilloscope and multimeter offers a bandwidth of 60 MHz, sample rates of 500 MS/sec, and record lengths of 6000 points. The signals are plotted on a 3.7" TFT display.

2-in-1 DSO & Multimeter 60 MHz Bandwidth 500 MS/sec Sample Rate 6K Record Length 3.7" Color TFT Display 640 x 480 Pixels Auto-Scale & FFT Functions Automatic Measurement Menu USB Data Transmission Rechargeable Li-Ion Battery

Multimeter Specifications
Full Scale Level	3 3/4 digits (max 4000-count)
Input Impedance	10 MOhms
Diode Current Measurement	0 to 1.5 V
On/Off Test	< 50 (± 30) beeping
Voltage	VDC 400 mV, 4/40/400/1000 V: ±(1% ± 1 digit) Max Input: 1000 VDC VAC 4/40/400 V: ±(1% ± 3 digits) 750 V: ±(2% ± 3 digits) Frequency: 40 to 400 Hz Max Input: 750 VAC (virtual value)
Current	DC 40/400 mA: ±(1.5% ± 1 digit) 20 A: ±(3% ± 3 digits) AC 40 mA: ±(1.5% ± 3 digits) 400 mA: ±(2% ± 1 digit) 20 A: ±(5% ± 3 digits)
Impedance	400 Ohms: ±(1% ± 3 digits) 40 kOhms to 4 MOhms: ±(1% ± 1 digit) 40 MOhms: ±(1.5% ± 3 digits)
Capacitance	51.2 nF to 100 uF: ±(3% ± 3 digits)
Performance Specifications
Bandwidth	60 MHz
Sample Rate	500 MS/sec
Scale	Horizontal: 5 ns/div - 100 sec/div, step by 1-2.5-5
Rise Time	5.8 ns or less (at input, typical)
Display	3.7" / 9.4 cm TFT display, 640 x 480 pixels, 65,535 colors
Channel	Dual
Input Impedance	1 MOhm ± 2%, in parallel with 15 ± 5 pF
Record Length	6000 points max. per channel
Interpolation	sin (x) / x
Attenuation	1x, 10x, 100x, 1000x
Coupling	Input: DC, AC, and GND
DC Accuracy	Over 16 ± (5% reading + 0.05 div) for △V, average
Vertical Sensitivity	5 mV/div ~ 5 V/div (at input)
Vertical Resolution	A/D: 8 bits (2 channels simultaneously)
Input Voltage	Max. 400 Vpp (DC + AC, 1 MOhm input impedance, probe attenuation 10:1), Cat II
Triggers	Type: Edge, video, and alternate Mode: Auto, Normal, Single Level: ±6 divisions from screen center
Acquisition Modes	Sample, Peak Detect, and Average
Gain Accuracy	±3%
Measurements	Automatic: Vpp, Vavg, Vrms, freq, period, Vmax, Vmin, Vtop, Vbase, Vamp, overshoot, pre-shoot, rise time, fall time, +width, -width, +duty, -duty, delay A→B
Waveform	Storage: 4 waveforms Math: ＋, －, ×, ÷, invert, FFT
Lissajous Function	Bandwidth: Full bandwidth Phase Difference: ±3 degrees
Communication Interface	USB
Power Supply	100 to 240 VAC, 50/60 Hz
Li-ion Battery	7.4 V
Battery Life	6 hours
Dimensions	4.5 x 7.1 x 1.6" / 11.5 x 18.0 x 4.0 cm
Weight	22.8 oz / 645 g

Auto-scale function
FFT function
20 automatic group measurement choices
Supports USB data transmission
Rechargeable lithium-ion battery, six-hour runtime
Waveform record and replay
Multimeter supports SCPI

Design and manufacture
Education and training
Automobile maintenance and testing

Related Questions and Answers

Q: 1. How many ULXD4D receivers that you can link without the D.A

A: you can only connect two systems without Distribution

Q: 2. Does this unit require an antenna management system?

A: No, in fact if you notice each of the antennas has an output just below the inputs. This unit basically behaves like an antenna distribution system.

Q: 3. What mics are compatible with SLXD4D?

A: The Shure SLXD4D Dual-Channel Digital Wireless Receiver (G58: 470 to 514 MHz) can be used with wireless bodypack and handheld transmitters. The Shure SLXD1 Digital Wireless Bodypack Transmitter - G58: 470 to 514 MHz (B&H # SHSLXD1G58) can be used with the compatible lavalier, headset, or earset style microphone of your choice and the Shure SLXD2 Wireless Handheld Transmitters are available with a variety of mic capsules so you can select the transmitter with the mic capsule that you prefer, such as the Shure SLXD2/SM58 Digital Wireless Handheld Microphone Transmitter with SM58 Capsule - G58: 470 to 514 MHz (B&H # SHSLXD2SMG). Just make sure that the receiver and transmitters you select are all for the same frequency band. This particular receiver operates on the G58 frequency band of 470 to 514 MHz.

Q: 4. what is the different between ad4q to ad4d?

A: The Shure AD4Q is a quad-channel receiver, and the AD4D is a dual-channel receiver.

Q: 5. WillG1 transmitters work with G50 receivers?

A: Only G50 transmitters will work with G50 receivers.

Q: 6. How is this receiver different than the DCR822 other than the slot-in size capability?

A: The Lectrosonics DSR Two-Channel Digital Slot Receiver and the Lectrosonics DCR822 Compact Dual-Channel Digital Wireless Receiver are incredibly similar units, and both models are compatible with the same transmitters. The only differences are within secondary characteristics like the type of panel used for the screen (OLED for the DCR822 / IPS for the DSR). Additionally, the DCR822 has onboard recording capabilities via microSDHC and can be powered with AA batteries or DC power. The DSR uses DC power only.

Q: 7. How many watts does the Shure ULXD4D pull down?

A: That unit does 9 watts of power consumption.

Q: 8. Does this item come with a manufacturer's ( Sound Devices) warranty?

A: Yes, the Sound Devices A20-RX comes with a limited 1-year manufacturer's warranty with the option of an additional 1-year extension upon product registration.

Q: 9. The description says rackmount, but the picture does not show rackmount brackets. Does this package include rackmount brackets?

A: Yes, the VocoPro DIGITAL-34-AI 4-Channel Digital Wireless Handheld/Headset Microphone System with Bags and Accessories (900 MHz) comes with a 4-channel rackmount receiver and rackmount brackets.

Q: 10. Can I use two of these together for 24 total channels of audio? Will signals interfere with each other?

A: More than one VocoPro Digital-Play-12 12-Channel UHF Digital System with Headset & Lavalier Mics (900 MHz), B&H # VOPLAY12, may be used together in the same space with varying degrees of reliability depending upon the physical nature of the environment, proximity of the transmitters to each other, and ambient RF from other devices.

Anthony	25/09/2024
[6 hours] I haven't used it very much yet. Mainly due to needing some adapters that I don't have. That said, it's a Korg, the build was straightforward and fun to do, the fit and finish of the product are of the usual Korg quality. The oscilloscope offers a variety of functions that are usually only available on much larger and far more expensive models. The book is full of artist interviews, history of synthesizers, beautiful photographs and a wide range of tips and tricks for this and other products as well as all sorts of patches. If you're new to oscilloscopes, I would definitely recommend getting the book as it gives detailed information about the various functions of the NTS-2. People have described the NTS-2 as the Swiss Army knife for musicians, and they're not wrong. Whether you're into synthesizers or not, this device can be of use to you. If you're a Korg fan, it's a must have. 5

Mike	15/09/2024
[sin (x) / x] As a Wedding DJ, I have a console with room for only one 19-inch rack mount mic receiver. I was going to buy two single units, but I didn't want four antennas. I stumbled across the SLX4D4 that's two receivers in one that only uses two antennas... PERFECT! And, it's easy to configure and sounds fantastic! 5

Anonymous	29/08/2024
[USB] It's one of the best mics out there these days. I'm so very happy that the sales rep advise me to spend the money on it. It was ALL worth it 5

grip72	25/08/2024
[10 MOhms] The splitter worked just the way hoped it would. 5

Eddie	21/08/2024
[sin (x) / x] Added this to a mix of other wireless mics, this channel covers flutes/penny whistles. Linked with a ULDX1 & Beta 54, reproduces the very subtle tonal qualities of flute type instruments. I received immediate positive feedback from our congregation. Setup was effortless. Battery life has been very good. Integration with the sound board was very simple with default gains. 5

SE	04/07/2024
[0 to 1.5 V] Use this splitter to set up mirrored monitors for Apple TV displays. 5

Charles	14/06/2024
[22.8 oz / 645 g] Very happy with the Shure receiver -- very little feedback and consistent quality 5

Patrick	05/06/2024
[22.8 oz / 645 g] I've used the Shure SLXD series now at 8 events. They've been great. I bought the rechargeable batteries and I'm getting 7.5 hours out of them. The setup is fast. They scan the open frequencies in less than 10 seconds. Very happy with this series! 5

Soupayan	09/05/2024
[sin (x) / x] Awesome oscilloscope! Other functions like FFT, weveforms and tuner are super helpful. 5

Edward	18/04/2024
[7.4 V] Love it. Exactly what I was looking for. Fun to build. Quality display. Only.bummer is it does NOT come with operations manual. 5