Styled in a dark gray producer finish, the Genelec 8350A is a single SAM-Series, 2-way active studio monitor designed to provide accurate mix referencing with extended low frequencies and software control capabilities for audio engineers, musicians, and producers in project studios, medium- to large-sized control rooms, commercial facilities, or mastering rooms. It features 350W of Class-D amplification driving an 8” woofer and a 1” tweeter, producing a frequency response of 33 Hz to 22 kHz.

A proprietary waveguide enhances imaging, while the bass reflex port extends the low-frequency response. The die-cast aluminum enclosure is shaped to minimize diffraction and reflections. XLR connectors are provided for the balanced analog input and AES/EBU digital input and output. Built-in signal overload protection enhances dependability and protects the speaker. Rear-panel room compensation controls include levels and high- and low-frequency adjustments. Detailed frequency adjustments and automatic calibration can be performed via GLM (Genelec Loudspeaker Manager) software and the GLM User Kit (available separately). A selectable power-saving mode enables automatic power up/down via a signal-sensing circuit.

The 8350A offers multiple mounting options including an Iso-Pod isolation stand and threaded holes that are compatible with select K&M mounts and various wall/ceiling brackets.

8" Woofer, 1" Metal-Dome Tweeter    350W Class-D Amplification    Proprietary Waveguide, Bass Reflex Port    High- and Low-Frequency Controls    Supports Software Control & Calibration    Low-Diffraction Aluminum Enclosure    XLR Analog and Digital Inputs    Selectable Automatic Power-Saving Mode    Multiple Mounting Options    Includes Isolation Stand

• 6.5" woofer and 3/4" tweeter
• 150W LF amp and 150W HF amp
• 38 Hz to 23 kHz frequency response (-6 dB), 45 Hz to 20 kHz frequency response (±1.5 dB) 
• Proprietary waveguide utilizes DCW (Directivity Control Waveguide) technology for improved imaging and a wider listening area
• Bass reflex port provides extended low-frequency response
• Rear-panel room compensation controls including high- and low-frequency adjustments
• Supports automatic calibration via software control
• Low-diffraction aluminum enclosure utilizes MDE (Minimum Diffraction Enclosure) technology
• XLR connections for balanced analog input and digital AES/EBU input and output
• ISS (Intelligent Signal Sensing) automatic power-saving mode
• Multiple mounting options: Iso-Pod and threaded holes that are compatible with select K&M mounts and various wall/ceiling brackets
• Includes Iso-Pod isolation stand for vibration decoupling

Related Questions and Answers

Q: 1. $2250.00, is that the price of the pair or a single?

A: That is the price of one single 8331 SAM studio monitor. Please discuss pricing with your B&H sales person. Thank you.

Q: 2. DOES IT HAS ACCURATE SOUNDING

A: Yes. The 8331A SAM studio monitor is designed for professional monitoring applications that require precision and accuracy. Using Genelec's SAM technology, Smart Active Monitors have several parametric notch and shelving filters that can be tuned automatically using the Genelec Loudspeaker Manager (GLM) software to exactly compensate for colorations generated by room acoustics. This enables SAM monitors to sound neutral and achieve accurate stereo imaging in all acoustical environments.

Q: 3. Are these monitors shielded?

A: No, the Genelec 8030C 5" 2-Way 100W Active Studio Monitors are not shielded. The Genelec models that have an "M" at the end of the manufacturer's item code (MFR#) are magnetically shielded.

Q: 4. How much heat does the amplifier generate? I'm asking so we can properly spec our aircon system

A: The manufacturer has not provided a specification for the amount of heat that the Genelec 7382AP SAM Series 3 x 15" 2500W Studio Subwoofer generates. Genelec does note that this subwoofer is designed for indoor use only and provides specifications for the environment that it can be used in. The permissible ambient temperature is 50 to 95°F and relative humidity 20 to 80% (noncondensing). The amplifier should never be covered or placed it in a closed cabinet. The space must be ventilated or sufficiently large enough to dissipate heat so that the ambient temperature around the 7382AP does not rise above 95°F. The reflex port opening on the enclosure should have a minimum clearance of at least 8 inches to ensure functioning of the reflex port. If the subwoofer is going to be flush mounted in a wall, you must allow for unrestricted airflow in the reflex port and amplifier cooling.

Q: 5. Which do you recommend 8240APM or 8040BPM? ( I'm not mixing engineer. It's for my own project from composing to mastering by myself.?

A: the genelec 8040b i bought a pair and it was the best decision of my whole life the sound is flat but is the real sound obviously you need to start to fix your room with auralex and accoustic things

Q: 6. Is this a good monitor for everyday use on a computer with built-in sound card and 1/8" to dual XLR splitter cable?

A: The Genelec 8020D Studio Monitor (Producer Finish) is an excellent choice for everyday monitoring, and it can be used with your computer's built-in sound card if an audio interface or monitor controller is not an option.

Q: 7. The price is for two monitors?

A: Genelecs are always priced singly; multiply the price by two if you want a pair. If you've never heard Genelec monitors, then you probably will think they're overpriced. But if you have discerning ears, and you do an A-B comparison between any Genelec and any other monitor of equivalent size, you will immediately hear the difference...and it's not subtle; it's not merely obvious, it's startling. Put another way, if you CAN'T hear the difference, you don't need to be spending money on Genelecs. Buy something cheaper. But if you want the best audio monitors in the world, nothing else even comes close.

Q: 8. Would this be a good choice to pair with the 8050A (LRC) and the 8040A (Ls,Rs) for a 5.1 setup in a 15x10 room?

A: The Genelec 7360APM would be a better choice by the specs because it goes down to 19Hz, giving you a lower frequency response. However, your room is not too large, and you may not be driving the 8050 and 8040 monitors to their full volume potential. Since the 7360APM is a SAM sub (DSP/GLM-network enabled and ready for 7.1) it's price point is higher.

Q: 9. Can the ISS be disabled? I see that there's a DIP switch for "ISS" on the back, so I assume that's for enabling/disabling ISS, but I'd like confirmation. ISS is not a feature I need or want. Thanks!

A: An ‘ISS Disable’ switch is located on each product’s back plate next to the other room response controls. First, when the mains power switch of the loudspeaker is set to “ON”, the ISS™ auto-start function (low-power sleep state on/off) of the loudspeaker is active. If this function is not desired, the ISS™ function can be disabled by setting the “ISS Disable” switch on the back panel to “ON” position. In this mode, the monitor is only powered on and off using the mains power switch. I hope this answers your question. Thanks.

Q: 10. Can these monitors be paired with a non-Genelec subwoofer without trouble?

A: Yes, you can pair a non-Genelec subwoofer with the 8020D monitors.