The American DJ AC3PDMXPRO 3-Pin DMX Cable 3'from American DJ AC3PDMXPRO 3-Pin DMX Cable 3'is useful for short DMX runs when daisy chaining units together. It uses 3-pin XLR connectors, which should not be confused with standard audio cables. This is the Pro version that incorporates PVC Jacket to prevent kinking at the connector and extend the life of the cable. The connectors are heavy duty and more durable than the connectors on the non-pro cables, which makes these cables suitable for use on set or location.

Cable Specifically for DMX    3-Pin XLR (Male and Female)    3' Length for Short Runs

Related Questions and Answers

Q: 1. Is this compatible with the Aputure Amaran F21/22 fixtures?

A: No, the PILOTCINE Atomcube DMX-D3P 3-Pin Cable for RX50/RX7 with PD 3.0 Charging Support (9') is not compatible on the Amaran f/21/22 for dmx.

Q: 2. Is this only for LED lights?

A: The ADJ Stage Pak 1 Controller & Dimmer Pack System can be used for tungsten lamp heads as well as long as they do not exceed the 1800 watt limit on each dimmer pack.

Q: 3. Wire Gauge? AMP current capacity? Shielding type?

A: The following cable is a 24 awg cable which is shielded and can support a current amp capacity of 14.2 amps.

Q: 4. Does this board work with led pars

A: This can be used for LED Pars but is not ideal for them as each fader will access one feature of the LED par so depending on the channel mode you can burn through channels quickly. If you have several pars set to the same dmx channel and can get by with 48 channels than this will work for you.A better option for LED pars is the RGB3C IR or the RGBW 4C IR as there are presets and built in programs. These are specifically built for LED pars.Another option would be something like the DMX operator series or the Show designer 1 if you wanted run scenes and programs that you have created, but not adjust colors on the fly (as this can be cumbersome with this option).

Q: 5. do you Daisy-Chaining them?

A: yes you can daisy chain the dimmer packs

Q: 6. Does this board work on 220V as well as 110V?

A: short answer is no it does not the included power adapter is for 120v but the power specs are DC 12-20V, 500 mA Min.

Q: 7. does this work with FotodioX Pro FACTOR 1 x 2 V-4000ASVL Bi-Color Dimmable LED Studio Light?

A: The system referenced is made for conventional par lights and would not be ideal for what you are likely trying to do. This setup is for units without an internal dimmer such as a 500 watt Par can. The unit that you refer to states that it is controllable via dmx but I cannot seem to find how many control channels it uses, so I would assume one and its just for dimming although the color temp seems to be adjustable also so it may be more channels. I would ask B and H about that part. I would recommend the SDC12 if you just want manual control of the dimming and no programming or scene recall. The description refers to DMX as the control source and also that it is 3 pin so there isn't any reason I can think of that this controller wouldn't work.If you want programability I recommend something like the ADJ DMX Operator or the Elation Show Designer 1 for more intricate programming.

Q: 8. HOw much does it weight and w hat is the length of the ball?

A: According to American DJ, the dimensions are (LxWxH): 12.5 x 12.5 x 16.25. The weight of the product is 8 lbs. / 3.65 kgs.

Q: 9. Can this just be plugged into an outlet and turned on?

A: Yes, Unit can be plugged in and set on auto run mode.

Q: 10. I need to know for sure how many pins are wired. There are conflicting answers. Does this cable have all 5 pins wired?

A: This is a 5 pin cable. All the pins have wires.