Receive 1080p HDMI and VGA signals over category cable from up to 230' with this Atlona HDBaseT Scaler Receiver HDMI Analog Audio Outputsfrom Atlona. Used in combination with an HDVS-150-TX switching transmitter (available separately), this unit provides a compact, automated A/V system with the convenience of automatic input selection, display control, and HD scaling. The HDVS-150-RX powers the HDVS-150-TX remotely through Power over Ethernet, saving time and integration costs. It can be surface-mounted behind a display or above a projector.

The HDVS-150-RX offers image adjustment capability and automatically matches incoming signals to the display's native resolution. Integrated scaling and video processing help optimize image quality and switching performance. This receiver also features audio de-embedding and third-party RS-232 control of the scaler, switcher, and display. Featuring automatic display control, the HDVS-150-RX can trigger a display to power on automatically whenever a laptop or other device is connected to the HDVS-150-TX. At the end of the presentation, when the presenter disconnects the laptop, the HDVS-150-RX forces the display to power off. The HDVS-150-RX display control capability can also be triggered by an external control system.

P2P Extension from HDVS-150-TX    Receives HDMI & VGA/Audio up to 1080p    Up to 230' 1080p over Cat 6a/7    Up to 197' 1080p over Cat 5e/6    Scales up to 1080p at 60 Hz & 1920x1200    Supplies PoE to Transmitter    RS-232 Scaler, Switcher, Display Control    Audio De-Embedding    EDID & HDCP Management    Field-Updatable Firmware

• Provides two-channel, analog audio signal on balanced captive screw connectors
• Improves A/V system audio with the use of an external amplifier such as the AT-PA100-G2 (available separately)

• Receives HDMI and VGA/audio signals up to 230' at 1080p over Cat 6a/7 and 197' at 1080p over Cat 5e/6
• Uses easy-to-integrate category cable for reliable system installation

• Scales video signals up to 1080p at 60 Hz and 1920 x 1200
• Selectable input resolution from 800 x 600 to 1920 x 1200 for a PC source
• Incoming signals can be automatically scaled to the display's native resolution

• Manages EDID communications with a source connected to the HDVS-150-TX
• Allows integrators to set or match a PC's graphics resolution

• HDCP compliance can be disengaged through the on-screen menu, control software, or a control system
• Allows non-protected material from PCs to pass to non-compliant displays, streaming devices, and teleconference systems; protected content is not transmitted

• Input switching (at the AT-HDVS-150-TX), image adjustments, resolution settings, and auto-set to display's native resolution can be made from a third-party control system
• Seamless integration with larger, control system-based A/V systems

• Facilitates on/off display control
• Included software simplifies programming
• Eliminates need for complex control system in small A/V system

• Industry-standard IEEE 802.3af PoE supplied by the receiver to the AT-HDVS-150-TX transmitter over HDBaseT
• No local AC outlet is required for powering the AT-HDVS-150-TX transmitter

• Rear-panel USB port provides an easy means for device updates

Related Questions and Answers

Q: 1. is there any latency added to the input and screen? is gaming not possible with this product?

A: There should be no latency and we see no issue using this for gaming.

Q: 2. Does this kit come with the power supply?

A: Yes, the Atlona 4K HDMI over HDBaseT 2x1 Switch Wall Plate Extender Kit includes a power supply.

Q: 3. Does the LAN connection carry network traffic? Can I use the LAN connection to access my network?

A: According to the manufacturer, there is network control on the LAN connection.

Q: 4. Is the VGA port set to the Full RGB Standard (0-255) or to Reduced RGB (16-235)?

A: This product meets the full current VESA RGB standard. If your products or systems were produced prior to 1980 , a different standard was used. this device is used by thousands of our customers successfully in a wide variety of broadcast and commercial applications. If you should find that, after testing, this device is not suitable, please return it to B&H for a full refund.a href= http://www.vesa.org/wp-content/uploads/2014/04/VESA_DSC-ETP200.pdf target= _blank http://www.vesa.org/wp-content/uploads/2014/04/VESA_DSC-ETP200.pdf/aB&H Easy 30-Day Return Policy:If you are dissatisfied with your purchase for any reason, you may return it to B&H within 30 days of the purchase date, subject to the conditions and exclusions below.a href= https://www.bhphotovideo.com/find/HelpCenter/ReturnExchange.jsp target= _blank https://www.bhphotovideo.com/find/HelpCenter/ReturnExchange.jsp/a

Q: 5. What transmitter do I need for this?

A: This item is hard wired to a matrix switcher. Consequently, we are not sure what your question is. Please email telling us what you wish to do. provideo@a href= http://bhphotovideo.com target= _blank bhphotovideo.com./a

Q: 6. Can USB used for all control functions?

A: Yes you can. This product comes with an RS-232 to USB adapter. With that adapter you'll be able to fully control the unit on your computer through USB.

Q: 7. Does this come with the power supply?

A: You have two options: This kit Includes an external power supply or you can use IEEE 802.3af PoE Power Sourcing Equipment (PSE).

Q: 8. If you have a projector with a HDBASET connection, can this be used to extend without using a Altona receiver?

A: Yes, If your projector has HdBaseT input you would only need to use the Atlona AT-HDVS-TX VGA/Audio + Two HDMI to HDBaseT Extender Switcher with Display to connect to your projector.

Q: 9. Does it come with the power supplies?

A: Yes, the Atlona Avance 4K HDMI Transmitter and Receiver HDBaseT Extender Kit comes with 2 external power supplies.

Q: 10. Do both sender and receiver units need to be powered? Or is power required only at one end?

A: Both units need to be powered. Two AC power supply come in the box.