The extra-small/big mount, black Bubblebee Spacer Bubble Windshield & Fur Cover for Shotgun Micsis a multipiece, adaptable windshield system for shotgun microphones that allows you to quickly switch from indoor to outdoor recordings in a matter of a few seconds. It fits microphones 23 to 26mm in diameter and has an inner depth of 55mm to cover all the ports on the mic. Designed specifically for boom operators, videographers, sound mixers, and sound recordists working under changing locations, it greatly reduces noise from wind, vocal plosives, and boom 'swoosh' while remaining acoustically transparent. The system includes the Spacer Bubble, The Long-Hair Spacer Cover (fur), and a mesh storage bag.

Reduces Wind Noise    Fits Microphones 23 to 26mm in Diameter    55mm Inner Depth    The Spacer Bubble Windshield    The Long-Haired Fur Cover    Acoustically Transparent Design    Quick-Drying Fur    Mesh Storage Bag

• Sennheiser: MKH30, MKH40, MKH50

• The Spacer Bubble windshield is constructed of a noise-free mesh base with coarse foam inside. The company's specially designed rubber base provides easy and secure mounting to keep the windshield firmly in place.

• Switch locations fast and get great audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh', and wind.
• Specially designed rubber base for fast, easy, and secure mounting.
• The Base windshield is made from highly efficient mesh, allowing your microphone to sound as natural as possible.
• The slip-on fur is made from Bubblebee Industries' best high-density imitation fur, which allows for optimal frequency transparency and effective wind protection.
• Quick-drying fur: If it gets wet, simply place the fur cover it in the aerated mesh bag and allow it to dry naturally.
• A practical mesh bag is included for easy storage and fast mounting.
• Designed in Denmark by sound lovers, for sound lovers.

• The combination of foam and mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip on the included long-haired fur cover and get effective wind noise protection with optimal transparency within seconds.
• If you're working in light-to-medium winds, you can use The Short-Haired Spacer Cover (available separately) instead.

Related Questions and Answers

Q: 1. How does this mic hold up in LOUD environments? Clipping issues at all?

A: No clipping issues as far as my use with it is concerned. I am very impressed with the mics ability to pull the audio out of the direction its pointed amidst a loud environment. B&H demonstrates this quite nicely in their own in store review video. Out of all the mics I have used, I honestly give it a solid 10/10 all around.

Q: 2. If I attach the LG size Spacer Bubble Windshield and Fur Cover to the AT BP4029 (AT835ST), how much mic shaft will be left?

A: The AT BP4029 is 9.29" long, and the Spacer Bubble Windshield & Fur Cover System has an inner depth of 5.1", so the remaining shaft would be 4.19".

Q: 3. What is the outer length in cm?

A: The Bubblebee Industries The Windbreaker is designed specifically for use with the Rycote Modular Windshield WS 4 Kit. The manufacturer has not provided any specifications for the Windbreaker, but the Rycote Windshield has a body length of 33 cm, so the internal length of the Windbreaker should match..

Q: 4. Please confirm, is the MZH 440 Fur included or not? thanks

A: MZH 440 Windshield is not included. It is available separately.

Q: 5. Can this Windbreaker be used with the Rycote Super-Blimp Kit for Rode NTG?

A: The Bubblebee Industries The Windbreaker for Rycote Modular Windshield WS 4 Kit is built specifically for the Rycote Modular Windshield WS 4 Kit system. It is not meant to be used with other windshield systems, and compatibility is not guaranteed.

Q: 6. What is the length of the item?

A: The manufacturer has provided dimensions for the inside depth of the Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Small-Diaphragm Mics (Extra-Small) which is 2.2" (55mm). It can be used with microphones that have a diameter of 0.7 to 0.9" (18 to 24mm).

Q: 7. Will the newer iPhones work with this and a lighting adapter?

A: It will not work properly. Only one of the two stereo mic capsules will work. If your primary use for this mic is for your iPhone, you are better off with either a Mono mic (such as the Sennheiser MKE400 and similar microphones. If you need stereo, look for a which is designed for the iPhone with a lightning connector on it (Shure and Rode, both have good options)

Q: 8. How long is the outer length of the Large size Spacer Bubble Windshield with Fur Cover?

A: The total length of the Bubblebee Industries BBI-SB is about 6.5 inches.

Q: 9. Is this compatible with Sennheiser MKH-50?

A: Yes, the Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Green, Extra-Small) will fit over the Bubblebee Industries The Spacer Bubble Windshield (Extra-Small/Big Mount), which is the compatible size for the Sennheiser MKH 50 Microphone. The Short-Haired Spacer Cover is not intended to be used by itself. It is intended for use over the Spacer Bubble Windshield. You can purchase both items together, which is the Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Shotgun Mics (Chroma Key Green, Extra-Small/Big Mount) - B&H # BUBBISBGRXSB.

Q: 10. Also, how much roll off does the high pass filter do? It just says switchable. Thanks.

A: This is not a published specification. For certain it is below 100Hz.