Roland Fd-9 Hi-Hat Control Pedal For Drummers

Roland Fd-9 Hi-hat Control Pedal For Drummers

Product Code: eq36085
Availability: In Stock

$599.97 $959.95

Qty

12 reviews Write a review

Description
Reviews (12)

Roland FD-9 Hi-Hat Control Pedal for Drummersis designed to provide a quiet solution to the dilemma of practicing drums at home: oftentimes even electronic kits are too loud for the thin walls of a densely populated apartment complex. Enter the FD-9, which offers a patent-pending link mechanism to reduce the noise produced when depressing the pedal. The FD-9 also boasts a realistic hi-hat feel with lifelike transitions between open, half-opened, and fully closed positions, as well as full compatibility with any V-Drum module sporting 1/4" trigger inputs.

Designed to Trigger Electronic Hi-Hats Patent-Pending Link Mechanism Low-Noise Operation Compatible with V-Drum 1/4" Inputs

Parameters
Accessories	1x connection cable
Dimensions	5.5 x 14.38 x 6.3" / 139 x 365 x 158 mm
Weight	4.4 lb / 2 kg
Packaging Info
Package Weight	6.35 lb
Box Dimensions (LxWxH)	18.3 x 9.8 x 8.3"

Related Questions and Answers

Q: 1. Which one to get 75mm or 100mm hi hat? I know the difference in size and weight but which would be better for still photography? Thanx.

A: Better depends on what you are doing. Most likely the smaller 75mm will be more than adequate for still photography. 100mm is better for cameras that are larger than most any still camera being used today.

Q: 2. Can this work as a low angle video tripod with the Benro 75mm half ball adapter?

A: For sure. Thats what it is for.

Q: 3. Does it comes with the ball head?

A: As illustrated, it is just the socket, not the ball or head.

Q: 4. Will this work straight out of the box with the Benro BV6 head? I keep seeing people mention adapters and I don't know why.

A: The Benro 75mm Hi-Hat and BV6 are both 75mm, so they are indeed compatible.

Q: 5. Hi all. I can't tell from the photos but does this come with a 3/8" stud on a platform so I can mount a ball head on it? Or will I need to buy a half ball leveling adapter to get the stud? Thank you.

A: A 3/8"-16 Low-Profile Tie-Down Adapter is defined as being included, but to properly mount any devices and achieve proper leveling, we recommend a half ball leveling adapter.

Q: 6. Does it come with Benro 75mm Half Ball Adapter?

A: No, it does not. Here is the B&H listing for it. Please note availability for the item. Benro 75mm Half Ball Adapter B&H # BEBL75S.

Q: 7. Would this hi-hat work with Cartoni focus 10 head?

A: Yes. The following system will adapt to the 100mm bowl drop.

Q: 8. I have the Magnus REX VT-6000 2-Stage Video Tripod with Fluid Head. Would that head fit on this or would I need adapter plate?

A: Yes, the head for the Magnus REX VT-6000 2-Stage Video Tripod with Fluid Head is compatible to be used with the Benro 75mm Hi-Hat.

Q: 9. Will this HH work with A Miller 100 mm head? The Manfrotto did not.

A: It definitely should -- We have tested this Miller head with it and it works: https://bhpho.to/2TEhiZc

Q: 10. Can you combine Benro Hi Hat and EDELKRONE Flex tilt Head if so will this combination support nikon d810 with tamron 24-70?cheers

A: Yes, but you'll need a half ball adapter in order to mount the Flex Tilt Head. Here is a Benro 75mm half ball adapter with a 3/8 -16 stud.

danmcc1979	26/09/2024
[6.35 lb] If you have any DTX Module from Yamaha , then you know this is the only hi hat pedal that will work correctly . Yes I have tried other pedals and they don't work . Only Yamaha hi hat controllers work with DTX 500 and above Modules . B&H has the Lowest price on this pedal . Pedal works great, open , half open , closed and foot splash or foot hit . Quick shipping and great packaging . So if you own a Yamaha Module and you need a hi hat pedal , look no further . 5

anyonymous	25/09/2024
[6.35 lb] Great product 5

citykid	06/09/2024
[6.35 lb] The pedal was a replacement from the original pedal (which lasted for five years) it was included with the DTXpress III drumset. The new pedal have been upgraded (contact sensor tape area is greater than original pedal. 5

IronCobra	02/09/2024
[4.4 lb / 2 kg] I purchase this pedal because I have an e-drum kit that consists of equipment from 3 different brands. I use V-Drum mesh pads with an Alesis DM10 brain, Pro Rack, and a Yamaha DTX550 module running to Hart cymbals. The response from the Yamaha HiHat trigger is better and SOUNDS better than the Alesis, so I needed the controler for the DTX550 to work properly. 5

JM	17/08/2024
[6.35 lb] ....and I found it, here, at a much better price than even ...! I usually thing if B&H for my photo needs, but when the cat peed on my Hi-Hat controller and shorted it out, I needed another one quick for an upcoming gig. Best price, ... 5

DTX Fan	26/07/2024
[6.35 lb] I bought this pedal to work with my Yamaha DTX Module. I had been using a Pintech pedal which would randomly cut out while I was playing. This pedal works great with my kit, it arrived a day early and was nearly half the price I saw * 5

Terry K	09/07/2024
[6.35 lb] Just what I needed working great! Great price too. 5

Doug	12/06/2024
[4.4 lb / 2 kg] Great product with some adjustability. You can't go wrong! 5

Malcomusic	29/05/2024
[4.4 lb / 2 kg] I have been using the full stand hi hat trigger for a while, and decided to upgrade to this pedal, with a mounted trigger....MUCH BETTER! You can place the padal where you want...adjust trigger position (I had an extra trigger) to where you want without moving pedal, unlike regular hi hat style trigger. I also find the trigger to be a bit more responsive to all foot actions, EXCEPT the hi hat splash is actually harder to trigger properly....Great product overall! 5

Laurence	27/05/2024
[4.4 lb / 2 kg] Ok, so I've been shooting corporate video and reality TV for just over 40yrs and still love'n my job. Over the years I've had many occasions where I needed a Hi-Hat support...rather than buy these fixed metal bolt to plywood units, I just had the wife sew a small durable vinyl pillow to do the job of supporting my camera. Now that shots made with a short 2' slider are common, I needed a real Hi-Hat support. When I discovered this Benro unit I was impressed. It's what I really needed for the past 40yrs. Build quality is true professional (it can support up to 220lbs - I'm 170lbs, stood on it to test and it's solid) and the additional included feet are a real plus. The carry bag is not an afterthought but a really nice bonus-very well made too! ...so from now on this little tool will be on every one of our shoots from this point forward. What are you waiting for.... Buy This Now!!! 5