The DigitaLinx DL-DVI extenders provide a means for the transmission of non-encrypted DVI-D signals at resolutions up to 1920x1200 and 1080p, plus either S/PDIF or analog stereo audio, over Category 5e or 6 cable at great distances. The system is fully compatible with all DVI 1.0 signals and seamlessly integrates the selected audio signal into the signal path. The unique locking power connectors are used to enhance overall system security. The DL-DVI-S transmitter provides a built-in EDID table as a standard feature.

• S/PDIF or analog audio transmission
• Transmitter provides built-in EDID
• Extension of DVI-D and audio signals
• Limited access to power for extenders on both ends
• Ideal for digital signage, house of worship, commercial video installations

Related Questions and Answers

Q: 1. Will this test active HDMI cables, that is, cables with Redmere technology?

A: Thank you for your question. This unit will test all HDMI 2.0 cables.

Q: 2. Does it add latency?

A: There is no known latency issues for this device.

Q: 3. Does the Aluratek ABT01F Bluetooth transmitter paired with Bluetooth headphones add a noticeable audio delay when used with a TV?

A: Discernible but still usable. Not critical.

Q: 4. How much audio power is delivered to earphone jack? Is this paralleled with the RCA jacks?

A: This is a passive box adding no amplification to the signal. The outpit to both the RCA and 3.5mm will be at line level.

Q: 5. Does it come with an power supply?

A: Yes, the IOGEAR GCS1104 4-Port USB DVI KVMP Switch with Audio and Cables includes a power adapter.

Q: 6. Can two wireless headphones be paired and used at the same time?

A: Yes, the Sennheiser BT T100 Bluetooth Audio Transmitter can stream to two headphones at once. According to page 18 of the user manual linked on the product page: Connecting the transmitter to a second pair of headphones The aptX Low Latency codec is not supported when 2 headphones are connected to the transmitter. With this configuration and depending on other factors, such as the models of the headphones used, the synchronization of audio to the TV picture may not be completely guaranteed. You can quickly connect another pair of headphones while the first pair of headphones is streaming audio. While the second pair of headphones is connecting to the transmitter, or is leaving the transmission range or re-entering it, the first headphones may experience an audio interruption until both pairs are connected to the transmitter. 1. Set the second pair of headphones to pairing mode. 2. Press the Multifunction button of the transmitter for 1 second. The LED lights up red. Once the transmitter detects that 2 pairs of headphones are connected, the LED lights up purple for 3 minutes.

Q: 7. I bought this to use with my headphones to watch my non Bluetooth television. Was working great and then just stopped. trying to resend, but it won't turn red despite it being unplugged for many days. HELP?

A: Try resetting the ABC01F, then make sure you are in TX mode and not RX mode. Contact support@aluratek.com for further assistance.

Q: 8. can I get a box configured with both XLRF & XLRM connectors?

A: The SoundTools CAT Rack FX Audio Over CAT5 Rack is only available as shown with the 12 XLR 3-pin female connectors and the SoundTools CAT Rack MX Audio Over CAT5 Rack is only available with the 12 XLR 3-pin male connectors. However, you can create a custom rack-mounted stage box by combining the two models or you can contact the manufacturer directly to inquire about ordering a custom build, which they do offer upon request. As another option for consideration with both male and female XLR connectors and CAT5, you may like the SoundTools WallCAT WC851-B Two-Gang Wall Plate with Four Male & Four Female XLR Connectors (B&H # SOWC851B). You can reach SoundTools by email at support@soundtools.com or contact them by phone at 805-383-0777.

Q: 9. What is the range of the bluetooth? Thank you!

A: Bluetooth range typically maxes out at around 30 feet.

Q: 10. Can more than two headsets be used at the same time?

A: No you can only pair to 1 output device at a time.