Designed for easy deployment, the Ubiquiti UAP-AC-IW-US UniFi Access Point Wi-Fi Systemfrom Ubiquiti UAP-AC-IW-US UniFi Access Point Wi-Fi Systemis a scalable enterprise access point solution providing enhanced coverage and improved network performance. It supports the 802.11ac Wi-Fi standard with speeds of up to 867 Mb/s in the 5 GHz radio band, and up to 300 Mb/s in the 2.4 GHz radio band. The Wi-Fi system offers simultaneous dual band operation with 2 x 2 MIMO technology for each band. It has a range of up to 328' and three Gigabit Ethernet ports. This UniFi Access Point (AP) has a sleek design and can be easily mounted to a wall, using the gang electrical wall box (sold separately).

802.11 a/b/g/n/ac Wi-Fi Standards    Range of up to 328'    3 x 10/100/1000 Ethernet Ports    UniFi Controller Software    Integrated Omni Antennas    Guest Portal/Hotspot Support    Passive Power over Ethernet    200+ Concurrent Clients    Reset Button    CE, FCC, IC Certified

The UniFi AP comes bundled with a non-dedicated software controller that can be deployed on an on-premise PC, Mac, or Linux machine, in a private cloud, or using a public cloud service.

The 802.11ac MIMO Technology offers Gigabit speeds and range up to 328'.

Install, configure, and manage all of the UniFi APs with the intuitive and user-friendly UniFi controller user interface.

Build wireless networks as big or small as needed. Start with one or more and expand to thousands, while maintaining a single unified management system.

Related Questions and Answers

Q: 1. We installed one unit in the guest bedroom and the neon glows a bit much, can we cover the unit with material to dim the glow?

A: Hi! Rather than physically covering the unit, you may want to consider simply disabling the built in LED. To do this (using the desktop UniFi controller software): Login to the UniFi controller -- Select Settings (Gear icon) --Select Site -- Uncheck the option to enable the status LED -- Select Apply Changes. Please note that this applies to all of the access points you manage (unless you have set-up multiple sites); if you have more than one access point, all of their LEDs will be disabled. If you are using the mobile application to manage your device(s), the ability to disable the LED is coming in a future update. As for physically covering the unit, I suppose you could do so with minimal effects (depending on the material), but I would strongly suggest disabling the LED over covering the unit. The last thing you want is to adversely affect the signal emitted from the device.

Q: 2. The BH listing shows this includes 5 Pieces but I only see three pieces. What am I missing?

A: Included in the box are 5 access points.

Q: 3. Will you supply an Australian power supply cord with this?

A: No. This is a (US) model. There are international UAPs. Also, please note that since this is 802.11af POE compliant, any decent POE switch can power it.

Q: 4. Hi Is this the US version or the international version(with support for all channels)?

A: This is the US version.

Q: 5. can i use the us version internationally in the UK?

A: I would bet yes, in the UniFi controller software I can choose where my site is. And that should limit and control what channels it will use. Other than that be mindful of what channels are legal and be sure to only use those channels.

Q: 6. How many VLANs does this support?

A: 4 VLANS

Q: 7. Which POE injector is needed for this AP? Is it Ubiquiti Networks 48V PoE Adapter with Gigabit LAN?

A: Yes, a 48V PoE Adapter would be compatible with this unit.

Q: 8. This unit has two network ports. Can each be plugged into a different network and have an SSID that connects to a specific port?

A: No it supports only data pass through for the same network.

Q: 9. Is the POE+ spec really required to make this run off of a POE switch? The wattage of this unit is within both the per-port and overall wattage of my existing POE (non POE+) switch. Just wondering if I need to upgrade my switch first.

A: A POE+ switch is not required.Per the quick start, any 802.3af/802.3at PoE+ compliant switch.The UAP-AC-PRO uses standard 48V POE, so any compliant switch will work - as is what you have stated that you have.It's the non-PRO versions that don't use standard POE.

Q: 10. Can this unit be mounted on wall vs ceiling?

A: Yes, included with the product would even be a wall mount option