Built specifically for use with the Angenieux EZ-1 and EZ-2 lenses, the Angenieux MSU-1A Cine Zoom Servo for EZ-1 EZ-2 Lensesfrom Angenieux MSU-1A Cine Zoom Servo for EZ-1 EZ-2 Lensesis a removable lens drive unit that provides servo zoom control to EZ-1 and EZ-2 cinema-style lenses. The zoom lens drive gear is positioned to interface with your lens, and is 0.8 MOD to match the cine-style gearing. The servo incorporates a run/stop button, return video, quick zoom, and a traditional zoom rocker.

Further compatibility is ensured by the inclusion of Hirose and LEMO connectors. Those who wish to may use the servo to control with either Canon or Fujinon standard ENG lens pan handles.

Removable ENG-Style Servo Zoom Handgrip    Camera Record Start/Stop    Zoom Rocker    0.8 MOD Drive Gear    Auto/Manual Iris Switch, Momentary Iris    12-Pin, 20-Pin Hirose Connectors    6-Pin LEMO Connector    Compatible with ENG Lens Pan Handles

The MSU-1A is self-aligning, mounting with three screws and a guide pin

Compatible with Canon and Fujinon standard ENG lens pan handles:

• 20-pin Hirose - analog and remote Control
• 12-pin Hirose - direct to lens port on camera
• 6-pin LEMO - MBUS port

Via a 20-pin adapter cable (not included):

• Fujinon
• Canon
• Microforce

The motor has been optimized to provide high-speed motor drive while maintaining sensitivity and precision operation

• Q-Z switch
• VTR switch
• Return switch
• Zoom operation rocker

Related Questions and Answers

Q: 1. Is this an in-between adapter that connects lens-to-camera like that of a Metabones (or similar) adapter? Or does this replace the PL mount on the lens itself?

A: This is not an adapter, this is an actual E-Mount which you would install on the EZ-1 and EZ-2 Zoom Lenses to change the current mount on it. So that we may best assist you finding the proper product for your needs feel free to email us directly at askbh@bhphoto.com.

Q: 2. hi, is this working w / DZOFilm Pictor 20-55mm and 50-125mm T2.8 Super35 Zoom Lens?

A: No, the Angenieux MSU-1A Single-Motor Cine Zoom Servo for EZ-1 and EZ-2 Lenses is designed specifically for the Angenieux EZ-1 and EZ-2 lenses; it is not compatible with DZOFilm lenses.

Q: 3. Can I connect this via LBUS to Arri cameras/RIA-1 to make use of the run/stop feature?

A: The Angenieux MSU-1 Universal Cine Servo with 3 Motors & Wireless Module for EZ-1/EZ-2 Lenses (B&H# ANMSU1) does allow for start/stop, and the ARRI Radio Interface Adapter RIA-1 Set (B&H# ARRIA1S) does offer start/stop control. However, no cable is included for making a connection to the 4-pin LBUS port on the RIA-1.

Q: 4. I have a BlackMagic URSA Mini Pro, which has a PL mount and a 12-pin lens connector. Does the MSU-1 include the correct cable, or if not which cable do I need?

A: You will need a 12-Pin to 12-Pin Hirose Cine Camera/Servo Connection Cable. Angenieux CC1212 12-Pin to 12-Pin Hirose Cine Camera/Servo Connection Cable https://www.bhphotovideo.com/c/product/1397131-REG/angenieux_mvc_501_01_17_cc1212_12_pin_to.html

Q: 5. I imagine it doesn’t fit 4x5 filters. If not, what part does?

A: The Angenieux Hood with Cap for Type EZ Zoom Lenses does not fit 4x5 filters. Angenieux does not make lens hood that fits 4x5 filters.

Q: 6. Can I use this with my Angenieux 30-90mm and control it through a Blackmagic ATEM 4M/E Switcher software?

A: If the interface can work with a Canon CineServo or Fujinon Cabrio the MSU-1 will work. The MSU-1 has a standard 20 Pin interface.

Q: 7. Which dial on the grip controls the focus motor?

A: On the bottom of the unit there are two switches to enable manual or servo control for both the focus and zoom. Change the focus switch to "S" for servo and change the zoom switch to "M" for manual. Use the rocker on the top of the unit to control focus.

Q: 8. Don't understand the difference between one motor and three motor versions... can u detail differences? I don't understand why 3 motors are necessary.

A: The Single Motor option, BH #ANMSU1A, only has the Servo control for the Zoom. While BH #ANMSU1 is the FIZ option, FIZ stands for Focus, Iris and Zoom. It has 3 motors to control the Focus, Iris and Zoom.

Q: 9. This works for both S35 and FF configurations of the lens, right?

A: Yes, The Angenieux RF Mount for EZ Lens would support both Full Frame and Super35 sized sensors.

Q: 10. Is this the FIZ control that's compatible with the new DZOFilm Tango lenses?

A: The Angenieux MSU-1 Universal Cine Servo with 3 Motors & Wireless Module for EZ-1/EZ-2 Lenses can only work with the lenses in its title, the Angenieux EZ-1 and Angenieux EZ-2.