TechLogix SM Series table inserts redefine the usability, versatility and cost of huddle room, meeting room and classroom collaboration. When paired with a compatible presentation switcher, the SM Series system provides both AV switching and display control for the cost of most 40" displays.
Simply put, an entire meeting can be run with only two buttons: an "on/off" button which turns the switcher and the display on or off, and a "show-me" button which switches the active input channel to the table insert on which the button was pressed.
The system also features automatic switching for sources that are not connected to the table inserts, such as media players, fixed PCs, or document cameras. When a source is connected and/or powered on, the system will recognize the input and automatically switch to that channel.
The TechLogix SM Series is also designed for an extremely quick installation. Simply mount the switcher under the podium or conference room table, mount the table inserts in pre-cut holes sized from 36mm through 60mm, and connect the table inserts to the switcher using standard AV cables (HDMI, DisplayPort, or VGA) and a 3.5mm cable. All power and control commands are sent from the table inserts to the switcher via the 3.5mm cable, and all display on/off commands are sent from the switcher to the display via CEC over an HDMI cable.

• HDMI input on table top
• HDMI and 3.5mm control outputs on bottom
• Buttons for display on/off and switching
• Fits 2.25" (57mm) table grommet hole
• Fully powered through 3.5mm control cable
• Mounts securely to the table

Related Questions and Answers

Q: 1. Does this camera come with film?

A: No, film is not included.

Q: 2. I'd like to use this device as a virtual receptionist portal when an actual person is not present. Is there a way to secure this mount to the desk/counter?

A: The DTEN ME Stand BH #DTDAS0127 is no configured for permanent installation. But it does look like it could be drilled through the base and desk or countertop to accommodate security/tamper-proof bolts.

Q: 3. Is this mic compatible with Nikon 1 S1?

A: I would say 99.99% yes. Does the Nikon 1 S1 has a stereo pin jack, that is so ubiquitous among the electronic today? I would call Nikon on their 800 number just to double check, the call is on Nikon's dime so it won't cost you anything. The mic will probably work on any other equipment beside Nikon camera equipment if they have this jack.

Q: 4. Hey there, does this use 35mm film?

A: Yes it does!

Q: 5. how does the ME 1 mic perform for ambient sounds, ocean surf, waterfalls, etc.?

A: Hi mark the me 1 capture all the sounds perfectly of course if you have to many spunds at the same time it my capture all and maybe your sound can hear perfectly because of the other sounds but we use these mic for weddings and interviewing the bride and the groom you can see our facebook tdcstudio and we update with some videos the interviews on informal or in our youtube channel tdcstudio1 in the informal s videos th3 interviews are with the mic

Q: 6. Is this microphone compatible with the Nikon D5 DSLR ?

A: Yes, the Nikon ME-1 Stereo Microphone is fully compatible for use with the Nikon D5 DSLR camera.

Q: 7. Does this product work for the Amazon Show 5 first generation model?

A: Per Amazon: The Amazon Adjustable Stand for the Echo Show 5 (White) BH #AMES5ASMW will work for both generations of the Echo Show 5. The only difference is that the colors may be slightly off.

Q: 8. Is this mic compatible with Nikon D90?

A: Unfortunately, the ME-1 Stereo Microphone is not compatible with the Nikon D90 as the D90 does not have an external mic input.

Q: 9. is the mount required in order to use this microphone for the nikon D5300?

A: It is a standard Nikon standard shoe mount. No special mount needed. You just slide it into your hot shoe on your Nikon camera and connect the 3.5mm mini-plug to your Nikon camera or Canon(I haven't tried it) etc, but if you have a flash, etc you must either remove it or get a bracket so that you can mount both your flash and mic at the sometime. It works great on my Nikon D5200. But remember if you use Nikon TTL-flash, your flash will need to communicate to the camera through the shoe mount. The mic does not communicate any other info to the camera than the miniplug. The mic will also work on other brands of cameras, camcorders, computers etc, equipped with a 3.5mm mini plug/jack which is most. The 3.5 miniplug/jack is pretty common in electronics today. It generates enough signal strength so it need no batteries. Ron

Q: 10. Can you display photos that are a memory card and not on Amazon Photos or facebook?

A: The USB port on the Amazon Echo Show 15 is not compatible with USB drives or memory cards.