You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Miller 937 Efp Carbon Fiber Tripod Legs 150mm Bowl

Miller 937 Efp Carbon Fiber Tripod Legs 150mm Bowl
  • Product Code: eq3672
  • Availability: In Stock

$7,554.87 $10,350.17

The Miller 937 EFP carbon fiber tripod offers 150mm bowl fixing and Quik-Lok leg locking for rapid setup, yet supports up to 200 lb (90.7 kg) and offers the utmost in strength and tortional rigidity.

Key Specs
Head Mount Type150 mm Bowl
Primary MaterialCarbon Fiber
Maximum Working Height64" / 162.5 cm
Minimum Working Height19.7" / 50 cm
Closed Length29.5" / 74.9 cm
Weight10 lb / 4.5 kg
Legs
Head Mount Type150 mm Bowl
Primary MaterialCarbon Fiber
Leg LockFlip Lock
Leg Sections3
Foot FeaturesSpiked
General
Maximum Working Height64" / 162.5 cm
Minimum Working Height19.7" / 50 cm
Closed Length29.5" / 74.9 cm
Spreader SupportMid-Level (Not Included)
Weight10 lb / 4.5 kg
Packaging Info
Box Dimensions (LxWxH)37.04 x 13 x 10.05"

Quik-Lok rapid, non slip clamping system, with self-adjusting brake mechanism for smooth, positive clamp action

Split carry handle for balanced, safe carriage when the tripod is collapsed

Related Questions and Answers

Q: 1. Are there other feet that will fit this tripod? The ones that come with it are not good and fall off easily.

A: We are not aware of alternative feet that you could use with this tripod. The only feet we know that will work are the included ones.

Q: 2. Load capacity is between 16KG to 75KG. What does that mean? Will it take my Sony Venice with a Leica Summilux, on its rig and raw recorder, one monitor etc.?

A: The load capacity of this head is actually 18 to 77 pounds which equals 8 to 35 kg. Your camera set up will need to be between those weights to work.

Q: 3. Are the rubber feet and speader included in this price?. Exactly as the photo looks?

A: We're afraid not, the rubber feet and mid level spread are optional accessories that are not included. B&H # SARF7004 - Sachtler Rubber Feet (Set of 3) https://bhpho.to/2G4WfpV B&H # SAMLSC - Sachtler 7027 Cine Mid-Level Spreader https://bhpho.to/2UfYXg4 B&H # SASPC - Sachtler 7023 Cine HD Ground-Level Spreader https://bhpho.to/2sM0CxW

Q: 4. Can you tell me the weight please?

A: 2.5kg (5.5lbs)

Q: 5. it says it has an 88LB capacity, but amazon has it rated for 9LBS?

A: Hello,My manager sat on the bowl, and he weighs probably about 120 lb. Amazon is quite wrong, or may be referencing the recommended payload of a kit, which bases max load off of the head. Recommended payload is 88 lb., but it can physically exceed that, though it won't be working optimally and runs the risk of a slip or collapse.

Q: 6. Will the Manfrotto 504HD head fit on this tripod? https://a href= http://www.bhphotovideo.com/c/product/683559-REG/Manfrotto_504HD_504HD_Fluid_Video_Head.html target= _blank www.bhphotovideo.com/c/product/683559-REG/Manfrotto_504HD_504HD_Fluid_Video_Head.html/aDo I need any adapters?

A: It should fit, I used it with Manfrotto 502 and 516 fluid head. This is one of the best designed tripods I've ever used. One lever controls both leg extensions at the same time. Very quick setup.

Q: 7. Does the Leofoto YB-75LK fit into this tripod's bowl?

A: Yes it will

Q: 8. Does this tripod come with a bag?

A: It doesn't but its worth the price.

Q: 9. It says with 75mm ball but see the ball nowhere in any of the photos of descriptions. Rather it says 75mm bowl. Does this version come with a ball?

A: This product doesn't include a tripod head. You can get the same version with the head.

Q: 10. Can you tell me what the maximum height on this setup is with the wheels on and the included fluid head mounted ? In other words, from the floor to the top of the fluid head ? Thanks !

A: The maximum height is roughly 74 inches with the dolly and head attached.

03/09/2024

[3] The mechanism is great, it is really more easy to operate than tripods with various locks

5
23/08/2024

[Carbon Fiber] That tripod is a great quality piece of equipment, I love it! Super well made and lightweight, perfect for location jobs with a Manfrotto head.

5
22/08/2024

[Carbon Fiber] I've read a lot review before buying this tripod and some of them were complaining about flimsy legs, and stuck rods. Well, maybe they had a bad batch, because this tripod is amazing. It's not really heavy, and it's sturdy and well made. For the price that's amazing. If you throw like 65 pounds or more on it and you get it to full height, then yeah, this is not the right tripod and the problems mentioned might appear.

5
18/08/2024

[3] These are my favorite sticks in the world. I love the quick clamps and two stages. I use them with my Oconnor 1030, which is my favorite fluid head in the world. They're slightly heavier than the carbon fiber version, but I enjoy the peace of mind knowing that they're not going to break if they ever get crushed by another heavy piece of equipment. I'm sure I'll be using them 25 years from now with no problem.

5
12/08/2024

[Carbon Fiber] Ordered these legs as a Manfrotto replacement and with the originals were as stout as these. Highly recommend.

5
25/07/2024

[Flip Lock] Strong stable bowl tripod that fits into carry on. The spec is that the folded length is 19.5 inches. Fits perfectly. Had no vibration with 70-200mm lens with 2x extender, in windy conditions. I had the legs spread to 60 degrees, and had zero concern that the 30 mph wind gusts would tip it over. The bag that came with it is overkill. It is 3 feet long, and wasn't designed for this tripod. My use case is video of mountain wildlife. It handles it.

5
16/06/2024

[Carbon Fiber] Purchased these sticks in Feb 2022 along with the CX10 head. Great range in height. Very stiff at any setting. Love getting a 100mm set of sticks for less than 6 pounds. A little awkward raising the height with camera attached. I extend the bottom sections first almost all the way... then it is easier to do adjustments on the top section without bending down too much or holding the tripod low with risk of camera tip. If a large change is needed, it is easy to pop off the camera with the side load plate of the CX head, adjust and pop it back on. I considered the flow tech system for adjustability... but the 75mm Vinten or Sachtler were as much as the 100mm Miller. The 100 mm flow tech was almost double. I love not needing a spreader. Remarkably stable sticks... and there is just something about a pan with a 100mm head that can't be accomplished with a 75mm.

5
15/06/2024

[Flip Lock] Happy with the quick and easy setup. Easy to jump from location to location and alter the height with the single lock on each leg. The mid-level spreader also adjusts and alters the footprint. I paired this with the Manfrotto 504HD and am very happy with the whole package!

5
17/05/2024

[Carbon Fiber] I've owned 4 of these for almost 2 years now and have put them through some pretty strenuous shoots and have had no problems. I was super skeptical when making the decision to buy and have not regretted it. These are every bit the head and sticks Sachtler systems are at half the price (no offense Sachtler, I love you too). I have put full size broadcast cameras with 40x barrel lens rigs on them with no compromise in stability, smoothness and support. Same with larger (17) prompter systems. Comfortable spring settings, pan and tilt tension...easy leveling, stable arms, smooth plate slide adjustment, extra bolt storage, solid locks on the leg stages...I'm completely satisfied with them.

5
30/11/-0001

[150 mm Bowl] Took a chance on these legs because of the weight capacity needed for a jib that we sometimes use (Seven Jib Compact XL). Never had legs without spreaders, so this was outside the box for me. So far these legs have been fantastic. The weight support is phenomenal and the number of ways you can contort the legs, thanks to no spreaders, makes them so much more versatile than other tripod legs. The icing on the cake is how short they collapse and how low to the ground you can get your shot. The cherry on top is how light they are with the carbon fiber. Used two of these on 4 week long shoots and so far they've exceed expectations.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Came-tv 703b Carbon Fiber Tripod Legs

$879.00 $1,089.96

E-image Carbon Fiber Tripod With 75mm Bowl

$1,499.97 $1,934.96

Leofoto Carbon Fiber Tripod With 75mm Bowl

$1,947.00 $2,336.40

Secced 150mm Carbon Fiber Tripod With Spreaders

$5,445.00 $7,568.55

Shape St20 Carbon Fiber Tripod Legs 100mm

$3,168.00 $4,847.04

Shape St15 Carbon Fiber Tripod Legs 100mm

$2,508.00 $3,009.60

Miller Solo-q 100 Carbon Fiber Tripod

$3,747.06 $4,571.41

Libec T150c Carbon Fiber Tripod 150mm Bowl

$7,497.00 $10,570.77

Swarovski Pct Carbon Tripod Legs Professional

$2,997.00 $3,656.34

Novoflex Triopod Carbon Fiber Legs Mini

$2,298.00 $3,148.26

Ozen 150mm Bowl To 4-bolt Tripod Adapter

$954.75 $1,231.63

Miller Baby Aluminum Tripod Legs With Spreader

$3,564.81 $4,349.07

Secced 150mm Baby Tripod Legs Compact Portable

$4,695.00 $5,774.85

Products You May Like

Think Tank Photo Venturing Observer M2 Gray 37l

$1,088.25 $1,686.79

Hoya W4 Umber 72mm Color Correction Filter

$269.70 $396.46

Aqua-vu Mo-pod 3 Wireless Remote Control

$179.97 $264.56

Epson Perfection V850 Pro High-quality Scanner

$3,147.00 $4,783.44

Tiffen Light Green Filter 5 X 6" #56

$1,049.85 $1,396.30

Pny Nvidia Geforce Rtx 4080 Super Verto Oc Gpu

$2,999.97 $3,899.96

Trijicon 4x32 Acog Led Riflescope Matte Black

$3,597.00 $5,035.80