The right-angled Cable Station 1/4" Plug with Switch from Planet Waves is a circuit breaker plug designed for use with Planet Waves Cable Station custom cable kits. The circuit breaker technology mutes the cable for quick on-stage instrument changes without noise, while the premium-quality components provide maximum power and signal transfer.

The Cable Station allows musicians to make their own custom-length instrument cables without the hassle and inconvenience of soldering. The cables are made by pushing the plug firmly on to the cable and tightening a screw on the side of the plug. The Cable Station 1/4" plug comes with a limited lifetime warranty.

For Cable Station Custom Cable Kits    Circuit Breaker Mutes Signal    Great for Quick Instrument Changes    Premium-Quality Components    Maximum Power and Signal Transfer    No Soldering Required    Limited Lifetime Warranty

• Circuit Breaker technology mutes the cable for quick on-stage instrument changes without noise
• Premium-quality components for maximum power and signal transfer
• Limited lifetime warranty

Related Questions and Answers

Q: 1. Does this 3.5mm Mini TRS fit the TC In/Out on the Zoom F6?

A: Yes, the Tentacle Sync C08 Tentacle to BNC Cable is compatible for use with the Zoom F6 Multitrack Field Recorder.

Q: 2. Can it connect hdmi to ethernet

A: No. It connects HDMI to HDMI, like an extension cord.

Q: 3. Will this cable work with the LRBATELIM Battery Eliminator (only for LR receiver) ?

A: Yes, the Lectrosonics Right-Angle Locking LZR Plug to Stripped and Tinned Leads Power Cable (12") is compatible for use with the Lectrosonics LRBATELIM Battery Eliminator for the Lectrosonics LR Digital Wireless Receiver, once a properly soldered connector is affixed to the other end, of course.

Q: 4. What's the cable length?

A: The CAMVATE D-Tap to 4-Pin Hirose Cable (Right Angle) measures 14.9" Coiled and 29.5" stretched out.

Q: 5. Does anybody know of a shorter one? I'd like one on my stabilizer rig, and I'm trying to minimize the amount of cables that just hang freely or are bunched up. I need two of these units - one on the Shogun 7 & one on the Tascam.

A: I am sorry but that is the length Tentacle offers.

Q: 6. Is this cable 12G?

A: No, the Paralinx 18" BNC Cable Right Angle to Right Angle (B&H# PAB18) is manufactured with Belden 1855A cable and therefore cannot be rated for higher than to a 6Gb/s signal. Naturally, with the cable being so short, it does nonetheless work for some 12G applications. . . but we cannot recommend it for that purpose.

Q: 7. Will this work with a Panasonic AU-EVA? With its BNC timecode in from a Tentacle Sync E Mk II, specifically.

A: Yes, the Tentacle Sync Tentacle to BNC Cable can be used to send timecode signal into the Panasonic AU-EVA1 Cinema Camera's BNC timecode input connection from a Tentacle Sync E.

Q: 8. compatvel com a Blackmagic Pocket 4k?

A: The Tentacle Sync C08 Tentacle to BNC Cable is a bi-directional cable used to feed or accept a timecode signal between a Tentacle Sync timecode generator and a device with a BNC TC in/out port. The Blackmagic Pocket Cinema Camera 4K has a 3.5mm timecode input. The C08 cable will only work if you are using a timecode generator that has a BNC connector.

Q: 9. Is this compatible with the Lumix BGh1 cameras? The camera I have isn't receiving the timecode signal.is it the camera or the cable?

A: Yes, the Tentacle Sync C08 Tentacle to BNC Cable can be used to feed timecode signal from a Tentacle Sync timecode generator into the BNC timecode input on the Panasonic Lumix BGH1 Box Cinema Camera.

Q: 10. What is the bandwidth? 18GBps or less? Does it support 4K 60Hz 4:4:4?

A: The Kramer High-Speed HDMI Extension Cable with Ethernet (1') BH #KRADCHMHFPIC supports 18GBps. There is no published documentation regarding 60 Hz 4:4:4. HDMI Support: Signals up to 4K, HDMI Ethernet Channel, 3D, x.v.Color™, Deep Color, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS−HD, CEC, 12-bit ProRes RAW.