Wooden Camera Extension Post For Uls 15Mm Lw & Studio

Wooden Camera Extension Post For Uls 15mm Lw & Studio

Product Code: eq37685
Availability: In Stock

$57.00 $83.22

Qty

19 reviews Write a review

Description
Reviews (19)

This long replacement Wooden Camera Extension Post for ULS 15mm LW & Studioworks with the optional Wooden Camera Universal Lens Support for 15mm LWS rods, as well as the 19mm/15mm Studio rod version. Machined from aluminum, it is lightweight, durable, and features a 3/8"-16 male screw for attaching to your lens as a support.

Aluminum Construction 3/8"-16 Male Mounting Screw

General
Compatibility	Not Specified by Manufacturer
Physical
Material of Construction	Aluminum
Weight	Not Specified by Manufacturer
Packaging Info
Package Weight	0.04 lb
Box Dimensions (LxWxH)	2.8 x 0.8 x 0.8"

Related Questions and Answers

Q: 1. Is the extended arm adjustable?

A: The hand wheel and gear is adjustable as it is separate from the arm that connects to the rod.

Q: 2. Can I use this baseplate with non-Wooden Camera cages? Will the Manfrotto 577 Rapid Connect Adapter work to connect my 8Sinn cage to the four posts on this baseplate?

A: Hi Keith, This product was created specifically to mount to our Unified DSLR Cages and the hole alignment is not likely to fit another brand of cage. Also, it is engineered to reach perfect height to optical center, which would be thrown off if installed on another device. Thank you.

Q: 3. Is the direction of focus reversible - ie.e for a canon lens - on this Wooden Camera Zip Focus?

A: Hang the ff upside down, from a top mounted rod to reverse throw

Q: 4. Can you convert the 15mm LWS to 19mm if you only bought the 15mm LWS?

A: Yes you can make that conversion. You will just need the Wooden Camera 19/15mm Studio Rod Clamp for Zip Focus Follow Focus, BH #WO255900. This will allow you to swap out the original clamp from the 15mm LWS Zip Focus. https://bhpho.to/2HD1MUt

Q: 5. is vocas MB-216 a good choice for A7SII + Sony 28-135mm? Does it vignette? Do I need any ring adapters to match front lens diameter?

A: There should not be any vignetting. Here is the adapter ring that allow clamping the matte box to the lens. Vocas 114mm to 105mm Adapter Ring for MB-255 B&H # VOSDR255105 .

Q: 6. Any way to secure the Canon Speedbooser 0.71x with the lens support bracket and the base plate?

A: You will need to use the Wooden Camera Lens Adapter Support Posts for Unified DSLR Cage. Small, Medium, Large https://www.bhphotovideo.com/c/product/1349148-REG/wooden_camera_900136_unified_dslr_cage_lens.html XL https://www.bhphotovideo.com/c/product/1632123-REG/wooden_camera_900233_xl_support_rod.html

Q: 7. Is this compatible with the Ronin DJI RS2 extended baseplate from SmallRig?

A: The Wooden Camera 15mm LWS Baseplate for RED KOMODO bottom could connect to the DJI RS2 lower plate. Please note that the top camera plate is Arca Swiss and could work with the Smaller Upper quick release on the DJI RS2.

Q: 8. Will this extension piece work well with the Wimberley F-9 Flash Bracket for Wimberley Head Version II?

A: Yes it will

Q: 9. Hi, what is the minimum height available with the 1/4" 20 post? I have 1.1-1.2cm of clearance from the top of the rod to the foot of the lens.

A: The minimum height one can secure a lens above the top of the rods is about 5mm. You should definitely have enough space for your setup.

Q: 10. Would this work with a Vazen Anamorphic Prime for mft cameras because those lenses are large and heavy?

A: Yes, the Wooden Camera Universal Lens Support (15mm LWS) is compatible with Vazen Anamorphic Prime lenses.

Chris	25/09/2024
[0.04 lb] This is one of the best and most versatile supports on the market. Managing lens changes and all the ways you have to lock them down to exist in a full cine workflow can be a chore. Having a support that is not only well made but has a design that allows it to be a solid option for both 19 and 15mm rod standards AND having accessories and configurations that allow photo and cine lenses of any size that I have thrown at it, is VERY valuable. 5

Jeremy	05/09/2024
[0.04 lb] Yes, this is a little overkill and pricey for the Fujifilm X-H2S, but I needed something sturdy and has a quick release to easily set-up/disassemble the rig. This baseplate fit all my needs and the added built-in spot for the PL mount is a nice touch. Quality is top notch! No complaints. 5

Josh	27/08/2024
[Aluminum] Great accessory to flash bracket to increase flash height. 5

Jimbo	24/08/2024
[Aluminum] Rugged and well engineered. Don't let steel-eye ruin you wildlife falsh photography! 5

Jonathan	14/08/2024
[Aluminum] The price is tough to handle, but everything I've got from Wooden Camera is incredible, and holds up over the years. Both in build quality and design. When I can afford it, love working with their pieces. 5

Charles	03/08/2024
[0.04 lb] I had a couple of follow focus over the last 12 years and was looking for a single-rod system since I want to scale down my rig. I ordered the new LanParte Mini follow focus cause it seems good for the price, but the tightening screw broke on the first use! The wheel is also quite small if you have big hands. This one is, of course more expensive, but you get what you paid for. Very, very smooth focus gearing, nice big wheel and easy to install. I found the one! 5

Incredible!	01/08/2024
[0.04 lb] One of the tightest-feeling clamp-on focus units I've used. The gearing is nice and steady with no kickback and the gears are easy to swap. The dial is on the larger side so you have a lot of precision in rotational travel. 5