Designed to eliminate the extra step of finishing the screen with trim, the 220V Da-Lite 21795EBLSI Tensioned Advantage Electrol Screen 58x104from Da-Lite 21795EBLSI Tensioned Advantage Electrol Screen 58x104is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Da-Lite 21795EBLSI Tensioned Advantage Electrol Screen 58x104This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 21795EFLSI.

119" Diagonal / 16:9 Aspect Ratio    HD Progressive 0.9 Screen Surface    0.9 Gain / 170° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Silent Motor    Video Projector Interface

Ideal for moderate to high output projectors, the light gray surface provides balance between color reproduction and image contrast. Cone: 170° Gain: 0.9

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Will the Lite fit a Canon R5 with the RF 85 1.2 L attached plus a RF 50 1.2 L and EF 35 1.4 II with EF/RF adapter?

A: Yes, the WANDRD PRVKE Lite (Black) will accommodate the Canon EOS R5 Mirrorless Camera with the Canon RF 85mm f/1.2 L USM Lens attached plus the Canon RF 50mm f/1.2 L USM Lens and the Canon EF 35mm f/1.4L II USM Lens with the Canon Mount Adapter EF-EOS R.

Q: 2. Is a separate camera cube needed?

A: WANDRD PRVKE has a built-in camera cube so you don't need a separate camera cube.

Q: 3. I was given a new unit and I need a cord Could you give me a part number?

A: The XYZ power coed is not available at B&H.

Q: 4. Compatible with A7siii and raw recording?

A: The a7s III raw video can only be recorded with an external recorder. The Delkin Devices 1TB Advantage UHS-I SDXC Memory Card will work for raw still images.

Q: 5. will this fit sony a7rIV with 100-400 lens, 50 mm lens and 18 mm lens along with DJI air2S drone and controller?

A: The WANDRD PRVKE Lite 11L Backpack can hold the A7R IV, a 50mm lens, and an 18mm lens. It cannot hold the DJI Air 2S Drone with Controller and the FE 100-400mm lens together. It would be one or the other.

Q: 6. Does this have a NATO rail on the top handle? The top portion looks similar to a NATO rail

A: SmallRig does not state that the top handle of the SmallRig Top Handle with Shoe Mount (Lite) is NATO compatible.

Q: 7. Hi,Does the price include the tripod and the ground spreader as shown in photo?

A: Hi, this is price for tripod only

Q: 8. would lite fit Canon R5 with adapter and canon 11-24 + canon RF 70-200 2.8?

A: The WANDRD PRVKE (Blue) is not big enough to hold all of those items.

Q: 9. Will this bag fit the Canon R7 with ef to rf adapter and ef100-400 v2 attached to the camera?

A: To protect your gear it is best to get the WANDRD PRVKE 21L v2 Photo Bundle (Black). The Canon R7, adapter and the Canon EF 100-400mm f/4.5-5.6L IS II USM Lens will fit in the WANDRD Essential Camera Cube. Here is the link: https://bhpho.to/3vdDN7a

Q: 10. What size filament

A: The XYZprinting da Vinci Junior 1.0 3D Printer uses 1.75mm filament.