Designed to eliminate the extra step of finishing the screen with trim, the 220V Da-Lite 21795EFLSI Tensioned Advantage Electrol Screen 58x104"from Da-Lite 21795EFLSI Tensioned Advantage Electrol Screen 58x104"is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Da-Lite 21795EFLSI Tensioned Advantage Electrol Screen 58x104"This screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 21795EBLSI.

119" Diagonal / 16:9 Aspect Ratio    HD Progressive 0.9 Screen Surface    0.9 Gain / 170° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Silent Motor    Video Projector Interface    Fabric, Roller, Motor Only

Ideal for moderate to high output projectors, the light gray surface provides balance between color reproduction and image contrast. Cone: 170° Gain: 0.9

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Compatible with A7siii and raw recording?

A: The a7s III raw video can only be recorded with an external recorder. The Delkin Devices 1TB Advantage UHS-I SDXC Memory Card will work for raw still images.

Q: 2. Does The Da Vinchi Jr. 1.0w come with filament?

A: No, there is no filament included with the printer.

Q: 3. HOW DOES IT PRINT OBJECTS WITH LARGE OVERHANG ? WHAT I MEAN IS , CANTILEVERED...DOES IT REQUIRE SUPPORT MATERIAL FOR THE OVERHANGING PART?

A: The build volume is maximum: 5.9 x 5.9 x 5.9 material. It does not require support for large overhang. You will need to experiment to see what the filament support limit is.

Q: 4. What size filament

A: The XYZprinting da Vinci Junior 1.0 3D Printer uses 1.75mm filament.

Q: 5. Will this house a Canon 80D and a Tamron 150-600 G2, plus a couple of smaller lenses?

A: You will want the WANDRD Essential Camera Cube BH #WACCEBK1 • MFR #CCE-BK-1 which fits inside and has an Interior of 10.5 x 9 x 4" / 26.7 x 22.9 x 10.2 cm. It will fit your camera and the one lens. You may not fit much more however.

Q: 6. Can you replace the glass bed on the Jr 1.0? How?

A: Scott is correct

Q: 7. Will this work in Sony A6500 shooting HD at 120fps ?

A: Good day! Yes, the maximum bitrate appears to be about 12.5MB/s so that card will perform great!

Q: 8. Does this have a NATO rail on the top handle? The top portion looks similar to a NATO rail

A: SmallRig does not state that the top handle of the SmallRig Top Handle with Shoe Mount (Lite) is NATO compatible.

Q: 9. will this work with 3rd party filament

A: No it has an RFID chip with metering. There have been some hacks but the company keeps up on hack fixes.

Q: 10. Would this work well for shooting on the BMPCC 4k?

A: Delkin Devices 1TB Advantage UHS-I SDXC Memory Card BH #DEDDSDW633 has a Max Read Speed: 100 MB/s, Max Write Speed: 80 MB/s and min Write Speed: 30 MB/s which is slow if you want to record at 4K60.