With its distinguishing blue cap color, the CT-LPXR-18B 3-Pin Adjustable Angle Cable Blue Capsfrom CT-LPXR-18B 3-Pin Adjustable Angle Cable Blue Capsis an 18" XLR cable with an angle-adjustable cable-outlet orientation. You can adjust the cable outlet from 30 to 150°, as well as from 210 to 330°, to better suit whichever device you're hooking into, be it a Sound Devices unit (the 633, 688, 788T, 302, 552, for example), a Zaxcom device, a piece of Zoom gear, or indeed, many such location-audio kits. Lightweight at 1.6 oz, the cable has been built to promote minimal intrusion and with preserving durability, with its rugged 3.2mm cable-jacket diameter and crush- and tear-resistant cable material. 

Blue Cap for Easy Distinguishing    Lightweight at 1.6 oz    Crush- and Tear-Resistant Cable    Angle Adjustable from 30 to 150°    Angle Adjustable from 210 to 330°    Durable 3.2mm Cable-Jacket Diameter    For Sound Devices, Zaxcom, Zoom, and More

Related Questions and Answers

Q: 1. will this work to power ANY audio mixer from ANY v mount battery?

A: The CAMVATE C2537 D-Tap to 4-Pin Hirose Cable can be used to power select devices from a D-Tap power source like a pro-style battery, or a Gold mount or V-mount battery plate. The device you are powering must have a 4-pin Hirose power input connector.

Q: 2. Since these cables are not Shielded, are there known issues with EMI and RFI Noise with them?

A: The cabling used to assemble the Cable Techniques Low-Profile, 3-Pin XLR Female to 3-Pin XLR Male Adjustable-Angle Cable typically implements either a lap or braided shield and does not have any known issues with EMI or RF noise.

Q: 3. Would this cable work to power a DJI RS2 via the Tilta Power Supply Base Plate from a V-Mount battery?

A: Yes, the Tilta Power Supply Base Plate takes a 2 pin lemo 0B connection, and as such, the Camvate D-Tap to Right Angle 2-Pin LEMO Cable (Coiled) would work fine for powering it through a D-Tap output from a V-mount battery.

Q: 4. Whats the voltage rating for this cable?

A: Manufacturer does not explicitly define voltage rating on this cable, but they do state compatibility with the following: Teradek Bond ARRI RED Paralinx Preston Transvideo Offhollywood Switronix Panasonic, which would suggest the cable is adequate for most v-mount and/or gold mount applications.

Q: 5. Can this cable work with the teradek Cube 655?

A: Yes, this cable will work with the Teradek Cube 655.

Q: 6. Are these compatible with the FS7? I.e. Does the male end rotate to a position where it can access the camera's awkwardly placed XLRs?

A: While we have not tested this configuration specifically, there is a good chance that the Cable Techniques Low-Profile, 3-Pin XLR Female to 3-Pin XLR Male Adjustable-Angle Cable can be adjusted to fit into the build of the Sony FS7 camera's XLR audio inputs, given its ability to adjust the cable outlet from 30 to 150°.

Q: 7. Can this be used to transmit timecode from the Denecke JB-1 to the Lectrosonics MTCR?

A: Yes, you can use the Kondor Blue BNC to 5-Pin LEMO-Type Right-Angle Timecode Cable to sync timecode from the Denecke JB-1 to the Lectrosonics MTCR.

Q: 8. What's the cable length?

A: The CAMVATE D-Tap to 4-Pin Hirose Cable (Right Angle) measures 14.9" Coiled and 29.5" stretched out.

Q: 9. With this cable would I be able to send timecode out from my Ambient lockit (5 pin lemo) to my Zoom F6 recorder (3.5mm)?

A: While the connections of the Kondor Blue LEMO 5-Pin to 3.5mm Right-Angle Timecode Cable for ARRI ALEXA (10") are compatible with the connections of the Zoom F6 and the Ambient Lockit to send timecode, the size of the right angle LEMO connector may be too large for the Ambient to fit all ports correctly.

Q: 10. is it attachable with Ambient Recording QAT-ECO?

A: The Ambient Recording QAT-ECO should be able to fit just below the colored cap on the XLR connector.