The 3.5mm TRS to TA3F Cable (Unbalanced, 24", Blue Cap) from Cable Techniques is an analog audio cable designed for connecting the output of a receiver such as the Sennheiser EK 100 G3/G4 to the TA3F line input of a mixer such as the Sound Devices 633, 688, and 664. It features a 3.2mm-diameter unbalanced cable with a 3.5mm (1.8") TRS connector on one end, and a TA3F jack on the other.

The TA3F connector features a right-side cable exit, allowing neat and tidy cable management. Cable Techniques low-profile cables are up to 40% lighter than standard cables.

For Receiver-to-Mixer Connection    3.5mm (1/8") TRS Connector    TA3F Jack    Unbalanced    24" Cable Length

• For connecting the output of a receiver such as the Sennheiser EK 100 G3/G4 to the TA3F line input of a mixer such as the Sound Devices 633, 688, and 664
• 24" cable length
• 3.5mm (1/8") TRS to TA3F
• Unbalanced cable
• Blue cap
• The TA3F connector features a right-side cable exit

Related Questions and Answers

Q: 1. Will this work with the mic on my Sennheiser PC headset?

A: No it will not. Your Sennheiser PC 5 CHAT Headset has no XLR connector on it.

Q: 2. Will this cable work with the Rode News Shooter Kit Receiver?

A: This cable should work fine

Q: 3. Hi everyone, this cable works with Sennheiser G3 Receivers? Thanks !

A: Yes it will.

Q: 4. Will this fully work with the balanced input from the signal of a Sennheiser 500 series?

A: The Cable Techniques CT-S2KLPOP-24 3.5mm TRS to Low-Profile XLRM Cable is intended for use as a receiver output cable, not as a transmitter input cable, since an XLR output connection is typically male and requires a cable with an XLR female connector. If that is the case, then you will want to use the Cable Techniques Mini TRS to XLR Female Low-Profile Sennheiser Line Input Cable - 18" (B&H # CAMINLPXIN18).

Q: 5. Can this be used to connect the Sennheiser G3 receiver to the Canon C70?

A: No, this Remote Audio cable has a female mini-XLR connector and you need a male mini-XLR connector for the camera's audio inputs. You can use the Kondor Blue Mini-XLR Male to Locking 3.5mm Stereo Cable for BMPCC 6K & 4K - Blue (B&H # KOMINIPLSBL) or the same cable in Black (B&H # KOMINIPLSBK) or the Cable Techniques Locking 3.5mm TRS to TA3M Cable for Sennheiser EK 100 G4/G3 to Canon EOS C70 (B&H # CACTMNG4C715) which has angled connectors.

Q: 6. Will this be compatible with the Azden Pro-XD Wireless Lavalier system replacing the included 3.5mm to 3.5mm cable? I'll use this to connect the Azden into an XLR-based Recorder (DR-70D).

A: Yes it should, I see no reason technically why it shouldn't. And why I have not tested it with the Azden Lav unit, (only the Senn-Heiser). But it should be just fine.Also, this is a much more solid unit than the original packaged 3.5mm - XLR cable that came with my SH kit.Hope this helps out...

Q: 7. Will these unbalanced cables work with the Rode Wireless Pack Kit? I purchased the balanced and unfortunately it doesn't work with the signal.

A: Thank you for your question. If you are wiring the receiver output you can use this cable or purchase the RODE XLR ADAPTER (B&H # ROVXLR) and attach to the output cable that the system comes with.

Q: 8. Does this work with my Tentacle Track E when connecting a Mic with a 48V supplied by BH #XVP1?

A: Yes, the Cable Techniques 3.5mm TRS to Low-Profile XLRF Cable can be used with the Xvive Audio P1 Portable Phantom Power Supply and the Tentacle Sync TRACK E Pocket Audio Recorder.

Q: 9. Can I send a stereo line out to two ta3 inputs on a Sound Devices 633 with this cable?

A: That should work. Just be sure phantom power is off on those inputs!

Q: 10. Would there be any issue with using this to connect a Sennheiser G4 receiver to the input of Blackmagic Pocket 4K?

A: The Blackmagic Pocket 4K is not compatible with the Cable Techniques Mini TRS to TA3F Low-Profile Wireless Line Input Cable (18").