The 9" Low-Profile 3-Pin XLR-F to XLR-M Shortie Mic Cable (9")from Low-Profile 3-Pin XLR-F to XLR-M Shortie Mic Cable (9")features a 2.8mm outer diameter Mogami W3031 cable, black caps, black shells, and gold pins. The XLR female's side-exit cable orientation is user-adjustable from 30 to 150°, and 210 to 330°. To help reduce profile, weight, and handling noise, this cable is suitable for shotgun microphones mounted on a boom.

Suitable for Mics Mounted on a Boompole    2.8mm Mogami W3031 Cable    Low-Profile XLR-3F    Neutrik XX Series XLR-3M    Black Shell with Gold Pins

Related Questions and Answers

Q: 1. how can this cable be compatible with both sony uwp-d and Sennheiser ew500? I own both so this would be aa good solution. Please explain.

A: The 1/8'' connector would screw into the receiver on your wireless system.

Q: 2. What's the cold shoe adapter in the picture that's holding the Sennheiser AVX-ME2 in place? Seems like a useful piece for making this cable adapter work well.

A: Yes the shoe mount adapter included in the AVX system can be used to mount the receiver for the AVX system to a shoe piece on the Canon C70 and you can use the adapter BH #CATAX3FC7001 to connect it to the mic input on the Canon C70 camera.

Q: 3. Is this cable compatible with Sony UWP-D receiver? They have a different wiring inside than Sennheiser g3) but the connector is the same.

A: Yes the Cable Techniques Mini TRS to XLR Male Low-Profile Wireless Output Cable (18") is compatible with Sony UWP receivers.

Q: 4. Will this work with a Movo WMIC80 Receiver?

A: Yes, the Cable Techniques Mini TRS to XLR Male Low-Profile Wireless Output Cable can be used with the Movo Photo WMIC80 Wireless Lavalier Microphone System since the receiver uses a 3.5mm TRS male locking connector.

Q: 5. Are these compatible with the FS7? I.e. Does the male end rotate to a position where it can access the camera's awkwardly placed XLRs?

A: While we have not tested this configuration specifically, there is a good chance that the Cable Techniques Low-Profile, 3-Pin XLR Female to 3-Pin XLR Male Adjustable-Angle Cable can be adjusted to fit into the build of the Sony FS7 camera's XLR audio inputs, given its ability to adjust the cable outlet from 30 to 150°.

Q: 6. The picture of the 8”black cable has two right angle ends, but the title says “straight” - which is it? Thanks

A: The connectors are angled and the cable is straight.

Q: 7. is the head type/angle adjustable on these cables? I'm looking for a 3 o'clock head on the male and a 12 o'clock head on the female.

A: It does not appear that the connector orientation on the Cable Techniques 10'Low-Profile Right-Angle XLR-3F to XLR-3M Mic/Patch Cable (Black Caps)Mogami W2549 Cable is adjustable. The XLR connectors used appear to be one solid component without the ability to unscrew and reorient.

Q: 8. will this cable work AND supply phantom power to a Shure VP88 stereo mic?

A: Yes, this Cable Techniques Y-cable will work with the Shure VP88. In order to power the mic, each of the 3-pin XLR connectors must be connected to a phantom power

Q: 9. Can these cables handle 48v phantom power? I want this cables because of their low profile look, and use them into a regular home studio setup (Podcasting, and vocals recording), but I dont know if there's a con with that, might over heating.

A: This cable handles Phantom power 48v, I've used them in the past to provide a shotgun mic with 48v from a camcorder and had no issues.

Q: 10. Since these cables are not Shielded, are there known issues with EMI and RFI Noise with them?

A: The cabling used to assemble the Cable Techniques Low-Profile, 3-Pin XLR Female to 3-Pin XLR Male Adjustable-Angle Cable typically implements either a lap or braided shield and does not have any known issues with EMI or RF noise.