The HDMI Video Scaler from Link Bridge supports an input/output resolution up to 1920 x 1200 at 60 Hz and outputs HDMI with embedded audio or de-embedded analog audio. The scaler also provides output picture adjustment on contrast, brightness, hue, saturation, sharpness, RGB level, and scan size.

• Supports input/output resolution up to 1920 x 1200 @ 60 Hz
• High-performance video scaler with OSD menu control
• Supports HDMI with embedded audio or de-embedded analog audio output
• Compatible with LB-CH chassis rackmount system
• Provides output picture adjustment on contrast, brightness, hue, saturation, sharpness, RGB level, and scan size
• Auto-EDID support for automatically detecting factory setting of the connected display
• Supports 50/60 Hz frame rate conversion

Related Questions and Answers

Q: 1. What size DC power connector does this come with? I’d like to get a USB to DC cable to use a battery with it.

A: The size of the power connection barrel is not listed, nor are we aware of a USB to DC power cable. However you could look in to using a Power Bank that has an AC outlet connection. The Xcellon 12,000mAh Power Bank with AC and USB Outlets would be a great choice to power this product on the go, B&H # XCPB1200AC. https://bhpho.to/2jX8gSA

Q: 2. I'm looking to specifically transcode SDI 23.98 1080p to HDMI 29.97 or 60i. Will it work?

A: Yes, you can change SDI 1080p 23.98 to HDMI 29.97 or 60i. You can find the specs from the BHphotovideo website or http://lumantek.com/index/product_view/59.

Q: 3. Will this allow me to control my LS1 lights with the sidus app?

A: Yes, you may use the Aputure Sidus Link Bridge with the Aputure Light Storm LS 1s LED Light and the Sidus Link App.

Q: 4. Will this scale 1080p HDMI in to 720p component out? Will it extract HDMI audio to DD 5.1 bitstream through the coax out? Thanks.

A: Yes it can scale 1080p HDMI in to 720p/60 out, video goes out both the Composite and Component video ports at the same time, in fact if you just press the 720p/60 button on the bottom of the remote then everything will be done. Audio is also extracted and will go out both the S/PDIF audio port and L & R RCA audio jacks, it samples audio at 48 KHz.

Q: 5. Does the transmitter send a standard fiber based DVI-D signal that is compatible with other receivers or monitors that have fiber inputs?

A: Link Bridge also offers the 4802 Two-Fiber Optical DVI Receiver to pair with the Transmitter. Once you have both the transmitter and receiver you will be able to send an DVI signal over Fiber.

Q: 6. The first photo displays two units, but then other photos only display one. Is this one unit, or two? Is one unit both the bluetooth receiver and the RF transmitter.

A: This is for 1 transceiver. As previously stated, the first photo shows the front and back of the unit.

Q: 7. Could you possibly use this to control lights from other manufacturers like the Nanlite 60c?

A: No, Aputure Sidus Link Bridge are only compatible with Aputure 2.4G Wi-Fi lighting fixtures, such as the HR672, Tri-8, LS C120d II, & LS C300d via your Bluetooth enabled smart device running the Sidus Link mobile app. For Nanlite 60C you need the Nanlite NANLINK Transmitter Box BH #NANTB • MFR #WSTB1 to control your lights through an app.

Q: 8. How many channels of audio does this support?

A: SHV+ supports "8 Channels for SDI Embedded Audio" and "2 channels for Ext. Audio out".

Q: 9. Does the converter cause any latency?

A: The Lumantek SDI to HDMI Converter with Display and Scaler will have a maximum of 2 frames of delay when converting to HDMI.

Q: 10. please post the mm of the DC input so I can track down a DC to usb appropriate cable?

A: According to the manufacturer, the Lumantek SDI to HDMI Converter with Display and Scaler can use a USB cable with DC Jack that is 5.5 x 2.1mm, USB 5V to DC 12V.