Frezzi Eylight Hairlight Backlight Kit 5000K

Frezzi Eylight Hairlight Backlight Kit 5000k

Product Code: eq38093
Availability: In Stock

$2,868.75 $3,528.56

Qty

12 reviews Write a review

Description
Reviews (12)

This aluminum Frezzi Eylight Hairlight Backlight Kit 5000Kis the fixture unit which holds the bulb and battery for the EyLight lamp system. A protective front cap is included. This unit is compatible with the separately available EyLight 5000K and 3000K LED bulbs and the 20W quartz-tungsten bulbs. Use this fixture to expand your existing EyLight setup if you already have extra bulbs, batteries, and mounting accessories.

1 x Eylight Fixture with Battery 1 x 5000K Bulb 1 x Charger, 1 x Adapter Stud 1 x Stud to Shoe Mount Adapter 1 x Light Stand (7') 1 x Gooseneck System

Key Specs
Item Type	1x LED Spot Light
Included Storage Case	No
Photometrics	40° at Unspecified Color Temperature: 224 fc / 2421 Lux at 3.3' / 1 m* 99 fc / 1076 Lux at 4.9' / 1.5 m *Standardized Measurement Calculated Internally Based on Closest Distance
Dimming	Built-In Dimmer
Front Accessory Mount	Proprietary
Power Source	Battery (Not Included)
Battery	1x Proprietary Rechargeable, 14.4 VDC, 22 Wh (Included) • 2-Hour Runtime • 1.5-Hour Charge Time
Power Consumption	20 W
Fixture Mounting	1x 1/2" Receiver
Light Fixture
Item Type	1x LED Spot Light
Included Storage Case	No
Photometrics	40° at Unspecified Color Temperature: 224 fc / 2421 Lux at 3.3' / 1 m* 99 fc / 1076 Lux at 4.9' / 1.5 m *Standardized Measurement Calculated Internally Based on Closest Distance
Dimming	Built-In Dimmer
Cooling System	No
Built-In Flash	No
Preprogrammed Effects	No
Umbrella Mount	No
Front Accessory Mount	Proprietary
Connectivity
Mobile App Compatible	No
Power & I/O
Power Source	Battery (Not Included)
Battery	1x Proprietary Rechargeable, 14.4 VDC, 22 Wh (Included) • 2-Hour Runtime • 1.5-Hour Charge Time
Battery Charging	1x AC to DC Adapter (Included)
Inline Switch	No
Power Pass-Thru	No
Power Consumption	20 W
Mounting
Fixture Mounting	1x 1/2" Receiver
General
Display	No
Environmental Resistance	No
Dimensions	4.5 x 3 x 2.5" / 11.4 x 7.6 x 6.4 cm
Weight	0.5 lb / 0.23 kg
Packaging Info
Package Weight	0.65 lb
Box Dimensions (LxWxH)	6.8 x 5.4 x 4.4"

Related Questions and Answers

Q: 1. I can adjust the locking handle with two allen wrenches, but how do I adjust the tension at the ball joints at the ends?

A: The ball joint tension can't be adjusted. I would recommend not placing anything over 6.61 lbs. Which is the rated payload.

Q: 2. Are the two sections of arm telescoping?

A: Unfortunately, the arm sections are fixed to one length.

Q: 3. How many in a case?

A: Unfortunately, these are only sold singly and not in a case.

Q: 4. Hi there. What was the length of the 1/2" connector? Cheers

A: The Frezzi MB-1A 5/8" to 1/2" Stud Adapter top 1/2" stud is also 1/2" wide.

Q: 5. What is the warranty for this?

A: This Frezzi FLC-4AP Quad Fast Simultaneous Charger with Power Supply (Gold Mount) BH #FRFLC4AP • MFR #93945 would have a 1 year manufacturers warranty.

Q: 6. Can a magic arm be mounted onto this?

A: If it is the Manfrotto Magic Arm that is used, it can be inserted into the base of this stand in place of the pole. The Magic Arm can also be screw into the pole using the 3/8 female threading at the end of the arm, though this may make the stand unstable.

Q: 7. Will this support a Canon 1D MK4 with a 70-200mm lens?

A: That setup can support no more than 6.6 lbs.If you mean the canon 5d Mark IV and lens it is about 5.28 lbs combined. It is too close to the maximum in my opinion and at the least will tip over.I would not recommend that set up with that camera and lens.

Q: 8. how long is the arm at full extension?

A: Fully assembled clamped to table.....vertical distance from table top to top of camera mount surface.......21.5

Q: 9. Is this good for elinchrom mono light?

A: This stand would be fine for holding an Elinchrom monolight lower to the ground.

Q: 10. Is this a standard 15W bulb that can be used for other light boxes? I'm looking for replacement 18 daylight balanced fluorescent bulbs for an older Light Impressions Spectrum 5000 light box.

A: This lamp could be used in other light boxes as long as it uses the same type of lamp base.

Patrick	22/09/2024
[Proprietary] Works great for small product shots, like jewelry, by photog pro. 5

Robert	22/09/2024
[20 W ] There is nothing special about this background light 'stand' except it is just off the floor where I want it to be, and it folds to a neat compact size. Oh yes, it works just fine too. 5

Jeff	15/08/2024
[0.65 lb] Ive had backlight stands before that were just shorter light stands and they still would sometimes get in the shot at times. I don’t think that will be an issue here. Although I can see where a shorter stand with the option to adjust the height might be handy sometimes. 5

Julian	07/08/2024
[0.65 lb] This backlight stand, different from its competitors allows up to 33 lb / 15 kg, that combined with the great price allows you to set your speedlights or monolights with confidence. 5

Brandon	27/06/2024
[Proprietary] I use this with my Manfrotto 099B and Matthews Telescopic Baby Stand Extensions for onstage and fob situations and the Impact Back Light Stand Base is extremely well made and durable and made from steel, so it's a little heavy, but worth every penny IMO It folds down to barely anything and I'm very happy that I bought it! I would definitely recommend this to anyone who wants a quality back light stand base that has a really small form factor and will last a lifetime of work and to only buy it once! Trust me, it's worth every penny IMO 5

Michael	04/06/2024
[Proprietary] I use these stands with Speedlights to provide background-subject separation and create vertical light columns with Speedlights along the background bottom edge. 5

Jon	07/05/2024
[20 W ] I needed something to mount a light low to the ground, this obviously does that. It's a simple stand but seems well built and sturdy and the included spigot is appreciated. No regrets! 5

Jeff	02/05/2024
[20 W ] Purchased two of these to get my lights down to ground level to shoot photos of pets, etc. Great stand for ground level lighting. 5