EOTech 3.5-18x50 Vudu Riflescope MD2-MOA Flat Blackis an ideal choice for long-range and precision target acquisitions. The optical system features bright and clear XC High-Density glass treated with broadband anti-reflection multi-coatings to deliver bright, clear, low-distortion, and high-contrast images. The wide 50mm objective aperture fills the niche for gathering enough light to produce visible images in the most challenging lighting conditions, where standard apertures fail. The scope is equipped with a MD2-MOA reticle in the first focal plane. It offers a brilliant red illumination with adjustable brightness that automatically shuts off after two hours of non-operation and has a parallax-free range from 15 yd to infinity.

The lightweight and durable aluminum housing is coated with a Type III hard anodized finish and features a 30mm single-piece maintube, finger-operated graduated turrets, and a precision fast-focus eyepiece. To provide traction for ease of adjustment, all knobs and rings are knurled. Also included with this optic are a pair of lens covers and a CR-2032 battery.

MD2-MOA Reticle, 1st Focal Plane    34mm One-Piece Maintube    0.25 MOA Impact Point Correction    80 MOA Windage/100 MOA Elevation    Capped Finger-Operated Turrets    Aluminum Alloy Housing/Type III Finish    Broadband Multiple Coatings    XC High-Density Optical Glass    Nitrogen-Filled, Waterproof & Fogproof    Parallax Correction: 15 yd to Infinity

• 1st focal plane
• Four medium long posts
• Milling illuminated crosshair
• Parallax correction from 15 yd to infinity
• Variable illumination
  • Magnification: 3.5-18x
  • 50mm objective diameter improves image brightness in challenging light conditions
  • XC High Density glass delivers clarity, resolution, and contrast
  • Broadband anti-reflection coatings for better image brightness, clarity, and detail
  • Field of view: 29.5 - 15.7' at 100 yd
  • Long eye relief of 4.0 - 3.5"
    • 0.25 MOA impact point correction
    • 80 MOA Windage and 100 MOA elevation adjustments
      • 34mm one-piece maintube
      • Aluminum alloy housing
      • Type III anodized finish
      • Capped finger-operated turrets
      • Knurled graduated adjustments
      • Fast-focus eyepiece
      • Low-profile zoom lever
      • Lens covers included
      • Shock-resistant
      • Fog-resistant
      • Water-resistant

        Related Questions and Answers

        Q: 1. Is it possible to fold it down with the black parts outside? in the video the white parts are outside, they will get dirty in no time?

        A: No, it only folds one way, storing it in the bag will keep it clean.

        Q: 2. How do these hold up on location, perhaps if the wind starts to pick up a bit? Will these blow over?

        A: These Foldable V-Flats would blow over in the wind. Otherwise, they are free-standing in a non-windy condition.

        Q: 3. Does the 2-pack come with a carrying case?

        A: Each Vflat comes with a carrying bag.

        Q: 4. Is this a zero stop scope?

        A: Yes, Vortex Golden Eagle HD 15-60x52 Riflescope (ECR-1 MOA Reticle) is a zero stop scope.

        Q: 5. Can it prevent echoes ? ( use it as sound panel to prevent sound from echoing in the room )

        A: This is for light control and is not suitable for audio control.

        Q: 6. How tall are they

        A: The V-Flat Foldable V-Flat Kit opens to 40.0 x 80.0 x 0.5".

        Q: 7. Hello,this reticle is the one whit a horseshoe?

        A: For the Meopta 3-18x50 MeoPro Optika 6 RD FFP Riflescope (MRAD RD Reticle), just the center crosshair illuminates. However, because of the type of illumination system used, there is a bit of illumination behind the horseshoe at around 11 and 4 o’clock.

        Q: 8. Do V-Flats come with a carrying case or bag?

        A: Yes, it comes with a carrying black fabric tote.

        Q: 9. 18X in this binoculars equals to how many MM?

        A: For a 35mm film camera a 50mm lens is considered normal or 1 power, so 50mm x 18 power would be the same as a 900mm lens.

        Q: 10. I have had my VFlat for one year and noticed the velcro is not sticking well. Seems like my board warped a bit too. Anyone else have this problem? Is there a way to get it to stick better? D

        A: Yes. would highly suggest that you use 2-3 inch gaffers tape for a good hold. I would suggest using the following tape. https://bhpho.to/3fPZqm2