EOTech 1-6x24 Vudu Riflescope SR2 Speed Ring Blackis an equally ideal choice for three-gun competitions, serious hunting, and use on AR-platform or bolt-action rifles. The optical system features bright and clear XC High-Density glass treated with broadband anti-reflection multi-coatings to deliver bright, clear, low-distortion high-contrast images. Also noteworthy is the first focal plane SR2 reticle, which is uniquely designed for fast target acquisitions at both a high and low zoom factor. It features two concentric target circles that allow you to quickly and accurately center on your target. While the outer winged Speed Ring dominates the field of view at low zoom, the fine target circle becomes significant enough to capture targets at higher magnifications. The reticle features a brilliant red illumination with adjustable brightness and an automatic shut-off function, which activates after two hours of non-operation.

The lightweight and durable aluminum housing is coated with a black Type III hard anodized finish and features a 30mm single-piece maintube, finger-operated graduated turrets, and a precision fast-focus eyepiece. To provide traction for ease of adjustment, all knobs and rings are knurled. Also included with this optic are a pair of lens covers and a CR-2032 battery.

SR2 Reticle, 1st FP    30mm One-Piece Maintube    1/2 MOA Impact Point Correction    100 MOA Windage/Elevation Adjustment    Covered Finger-Operated Turrets    Anodized Aluminum Alloy Housing    Broadband Multiple Coatings    XC High-Density Glass    Water- & Fog-Resistant

• First focal plane
• Illuminated red Speed Ring
• Illuminated target circle-dot with windage and ballistic stadia
• Optimized for 7.62 mm BDC
  • Magnification: 1-6x
  • 24mm objective diameter
  • XC High-Density Glass
  • Broadband anti-reflection coatings for better image brightness, clarity, and detail
  • Field of view: 102.4 to 16.7' at 100 yd
    • 1/2 MOA impact point correction
    • 100 MOA Windage and 29 MRAD elevation adjustments
    • Long eye relief of 4.1 to 3.5"
    • 30mm one-piece maintube
    • Aluminum alloy housing
    • Type III anodized finish
    • Capped finger-operated turrets
    • Knurled graduated adjustments
    • Fast-focus eyepiece
    • Low-profile zoom lever
    • Lens covers included
    • Shock-resistant
    • Fog-resistant
    • Water-resistant

      Related Questions and Answers

      Q: 1. I have Hensel Integra 500 Plus MFR # 8815FM. Is this what I need for the following products: Hensel Octaform Lightbox 120 MFR # 4150120, and Hensel Softbox (36 x 48 ) MFR # 4180912?

      A: Yes, this speed ring is required for the Hensel Octaform 120 and the Hensel 36 x 48 softbox to fit the Integra 500 monolight.

      Q: 2. what is difference between FORTIS6 1-6x24 and AMPLUS6 1-6X24 ?

      A: Sorry B&H has no information on the Fortis 6 presently. I did find a YouTube video on the product

      Q: 3. We are changing from Bowens to Profoto and i have a lot of Bowens and Godox modifiers, This speedring can be use it with does softboxes with Profoto Lights?

      A: In most cases yes this ring will work. Not all boxes however use the standard size. If you find it does not fit do not force it.

      Q: 4. Does this product then work with profoto octa soft boxes/modifiers like the profoto rfi speedring or only impact modifiers?

      A: This ring would not fit the Profoto pre-RFi or RFi softboxes. However, it would work with softboxes from Chimera, Westcott and Photoflex.

      Q: 5. Does anyone use this speed ring successfully with the Profoto RFI 3x4' softbox?

      A: The impact speed ring will work with the Profoto RFI softbox.

      Q: 6. Does this work to use in an Paul buff Octabox and a B1 light?

      A: As long as it's traditional octabox with a removeable speedring, yes.

      Q: 7. I want to use all my Bowens softboxes with profoto D2, is this ring compatible or any recommendation?

      A: This ring is compatible with most softboxes.

      Q: 8. Does it require a license to be exported like BIS?

      A: We are not permitted sell most rifle scopes outside the US. The one's that require paper work will say so on the product page.

      Q: 9. Does anyone know if this Impact Speed Ring will fit Paul Buff soft boxes or the Balcar mount?

      A: The outer ring of the Impact SR-PRO Speed Ring will fit any brand standard style softbox that uses rods with tips. The inner portion of this speed ring is made to mount onto Profoto products and will not fit Paul C Buff /Balcar products. To mount a standard softbox on a Paul C Buff product, use the Impact SR-PCB Speed Ring. https://www.bhphotovideo.com/c/product/884597-REG/impact_sr_pcb_speed_ring_for_paul.html

      Q: 10. Does the inner part that attaches to the Profoto light come off? If so, what are the outer dimensions (across the hole) between the outer edge of the flanges? Reason I ask, I have many PCB softboxes and its proving difficult to find a Profoto adapter. But looking at this, the inner mount with flanges appears like it would fit on the PCB softbox, if its roughly 136mm width.

      A: The adapter is designed to work with a specific unit and its exact measurements are not published. However we do know people have tried it with the PCBuff softboxes and it does not work.