You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Jbl Cbt 1000e Extension Loudspeaker For Line Array Column

Jbl Cbt 1000e Extension Loudspeaker For Line Array Column
  • Product Code: eq38126
  • Availability: In Stock

$4,317.00 $5,525.76

The black CBT 1000E Extension Loudspeaker from JBL features six 6.5" low-frequency drivers and a purpose-designed crossover network for use in the CBT 1000 + 1000E system. The drivers feature neodymium magnet motors with 2" diameter voice coils providing maximum flux in a compact package. The magnetic structure is magnetically shielded and the copper pole tips reduce flux modulation and minimize distortion. The 0.62" long coil provides linear drive and high power handling of 1500W in a compact driver.

Each driver features damped blended surrounds and coated sealed paper cones. They are coated with diaphragm materials to provide moisture, UV, and salt resistance for outdoor capability. This extension speaker comes in a tough fiberglass reinforced ABS cabinet. Its thick heavy-duty aluminum grille allows for rust-free installation outdoors. A coupler plate is included for combining this extension speaker with the CBT 1000 array speaker (not included).

Parameters
Active or PassivePassive
Frequency Response38 Hz to 650 kHz at -10 dB
Power Capacity1500 W (6000 W peak), 2 hours
1000 W (4000 W peak), 100 hours

These values conform to IEC standard, full bandwidth pink noise with 6 dB crest factor
Maximum Sound Pressure Level (SPL)124 dB full space, 130 dB half-space (65 to 300 Hz)

2 to 6 kHz, calculated based on power rating and measured sensitivity, exclusive of power compression
Nominal Sensitivity2.83 V at 3.3' (1 m), average 2 to 6 kHz:
92 dB full space
98 dB half-space (65 to 300 Hz)
ImpedanceNominal: 8 Ohms
CrossoverNot Specified by the Manufacturer
Low Frequency Driver6 x 6.5" (165 mm) driver
Maximum Input Voltage100 V RMS (2 hours)
200 V Peak (when powered separately, not in parallel with CBT 1000)
Enclosure MaterialFiberglass reinforced ABS cabinet, powder-coated 1050 aluminum grille
InsertsMounting Holes:
14 x M8 insert on back panel (20mm deep) for use with swivel pan/tilt bracket(s) (not included)
Conform to the industry standard rectangular 5 x 2.75" (127 x 70 mm) pattern for OmniMount and other compatible third-party brackets (not included)

4 x M8 insert on top
4 x M8 insert on bottom of cabinet end-caps
Input ConnectionsNot Specified by the Manufacturer
Outdoor UseIP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. Exceeds Mil Spec 810 for humidity, temperature and UV, ASTM G85 for acid-air/salt-spray (200 hours)
FinishBlack (RAL9004)
Dimensions9.9 x 40.2 x 11.6" (25 x 102 x 29 cm)
Weight44 lb (20 kg)

Six 6.5" high-excursion LF drivers

1500W RMS power handling

Built-in purpose-designed crossover network for combining with CBT 1000 array speaker

Coupler plate is included for joining this speaker unit with the array speaker

Doubles power handling of the array speaker and extends pattern control

Related Questions and Answers

Q: 1. Maximum throw distance is 15m, but how close can the front be before driver integration and directionality compromises performance? Is 10 - 12 ft too close?

A: For all of the C211, The Horn is aimed down 10° and the system sums at about 3’ feet between the Woofer and Horn. The C221, C222, C222HP use a dual dissimilar technology that beams the HF downwards as required for commercial cinemas with stadium seating. I would not recommended these for home installs(with Limited Height) if the seats are not within the -20° angle of the horn.

Q: 2. Can this be mounted sideways or is it only for a vertical setup?

A: The JBL CBT 100LA-1 line array is designed to be mounted vertically, for sound that will reach all the way to the back of a room.

Q: 3. Are there 2 speakers or one in the box?

A: This is one extension speaker to be paired with this model (JBCBT70J1W).

Q: 4. What type of cable or connector does it use?

A: This speakre uses bare-wire tap terminals.

Q: 5. Where are these speakers made?

A: Sorry, I've already got them mounted up to high to be able to find out where they are made. We had them installed a year ago and they work and sound awesome!

Q: 6. Has anyone used these with SRX828SP subs? Any reports? What’s the ideal sub to 906LA ratio?

A: This is a subjective situation and the answer will be based on the application, size of the room, the style of music, as well as the volume that it will be played at through the system. Please contact us directly by phone or through live chat and give us a bit more information about the application and how the system will be used so we can provide you with the appropriate advice.

Q: 7. I have 2 panaray 12's. Can these be plugged into any power amp? I am currently using a mackie 808s FR series. 600 watt. Would they work? Smokehousegamblers @ gmail . Com

A: They ill connect to a power amp via their: Connectors 2 x NL4 Neutrik speakON (parallel-wired), input 1 x 2-pin barrier strip, input NOTE: Nominal Impedance 8 Ohms Power Handling 300 W (1200 W peak)

Q: 8. What is the best amp to use?

A: QSC PLX-3102 - PLX2 Series Stereo Power Amplifier - 600W per Channel into 8 Ohms B&H # QSPLX310: https://bhpho.to/2xJq2SI QSC GX5 500 Watt 8-Ohm Power Amplifier B&H # QSGX5: https://bhpho.to/2ywGdTS

Q: 9. Is there a clamp to connect it to the pipe? what size pipe will it connect to?

A: It uses a Tray Clamp with a T-knob screw and clamp to a pipe being no more then 50mm (1.96") thick at most.

Q: 10. what kind of amplifier do I use for these speakers?

A: I would recommend the QSC GX3 300 Watt 8 Ohm Power Amplifier, (B&H # QSGX3,) for a two-speaker set-up. If you require several speakers, I would pair them up with a 70- volt amplifier. Please contact one of our representatives for a specific model, based on your requirements.

17/09/2024

[Black (RAL9004)] I've been working in live professional audio for over 20 years. I can say hands down these units are the best (small/medium) PA. I work at a university and we own 2 of the 3000 and one of the 1000 units. These have served 90% of all our needs. Just last weekend I ran the pair of 3000 for about 350 in a ballroom for our new student orientation and ran them hard ( Hard House, EDM and Hip Hop. They have built in limiters that help protect the drivers, but I did not even have to run them to limit. The coverage / intelligibility were fantastic for spoken word. Great units for the price and I only need to take one trip in the van to move the whole PA.

I will be ordering 2 more. Well done Turbosound for these fantastic units.good for Pro, church, or school.

CON:

Low end is lacking for our application, I would have prefered our pair of dual 18" subs, but the pair of 12" subs per side worked OK.

5
14/09/2024

[Nominal: 8 Ohms] I replaced the front speakers of my surround system with these. The slim profile looks great next to my tv, but the sound is large. When I listen to music, I just use these and my subwoofer and get the complete frequency range without adjusting any eq.

5
11/08/2024

[44 lb (20 kg)] Excellent speaker. Dealing with B&H was terrific! Order was shipped immediately and I had it the next day. Thank you!

5
26/07/2024

[44 lb (20 kg)] for indoor and outdoor events at a small to medium size these work very well and hold up very well.

5
15/07/2024

[Black (RAL9004)] Purchased a pair of these with all custom bags. Replacing my 'standard' sound system of Mackie SWA 18"+ SRM 12" 2-way system. Absolutely loved using them and happy i upgraded.

Operation: I clocked myself at 46 seconds to disassemble the entire column and put all components in the cases/bags including sub. I can carry the sub though its not very mobile friendly without dolly. Erects in similar amount of time and much easier on the eyes.

Audio: Compared them with Bose, EV, RCF, and Fender. Out of the group the RCF was the best sounding overall. The Turbosounds sounded better than the rest but the dual 12" sub did outperform the single sub on the RCF 12, at least for me. Aesthetically it was nicer than the RCF but the EV evolve looked the nicest and was the easiest to transport.

Would highly recommend. Happy to have joined the Turbosound family.

5
19/06/2024

[Black (RAL9004)] Used this product in a number of difficult acoustic situations. Very effective in highly reverberant spaces. Some bone head rocker sound people who don't get physics have no idea how these work so a scared of them 'because they don't have a horn'. Don't listen to those idiots - these speakers are great, and designed by one of the best speaker engineers that has ever lived!

5
14/06/2024

[Passive] I love this speakers, I will admit they will scream when pushed hard which is why I bought another set so I can get more coverage pushing less. They have never gone into limit nor have I had any issues at all. I am getting old so they are a little tough to lift so bring a friend! I do use them over the VRX918SP subs and again excellent. I highly recommend them with the tops as they have a built in crossover with DSP to tune them really well making a very fast plug and play.

5
12/06/2024

[Black (RAL9004)] I just installed two of these, along with suitable wall treatments, in a gymnasium that was converted into a church auditorium. They perform great. The variable beam width and asymmetrical vertical pattern put the sound where I needed it and kept it off the walls and ceiling. Their size doesn't make them look like speaker arrays - they almost disappear into the room.
I added the low frequency extensions to fill out the spectrum. They ARE NOT rock concert speakers.
When properly installed in a space, they are a perfect solution to difficult sound control situations.
I would install them again in the proper application!

So called experts who diss them don't know what they are doing.

5
21/05/2024

[Black (RAL9004)] Installed 8 of these speakers in a church of 500 w/ balcony. Absolutely phenomenal sound. The deep feature is fabulous. Great tonality and clarity, with warm lows. Plenty of overhead power. Very pleased with this purchase. Thanks B&H

5
15/05/2024

[Black (RAL9004)] I already had JBL Party Box 1000, when JBL had new products PRX one coming out still want bought new with This JBL PRX One this month . Both speaker sounds excellent. That’s why i give this products 5 star ⭐️⭐️⭐️⭐️⭐️
I hope JBL still developing with new products for us enjoy great sounds on the future. I will be your customer forever. Thank you for all of you who’s creating excellence these products.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Jbl Cbt 50la-ls Line Array Column Loudspeaker

$1,614.00 $2,550.12

Jbl Vrx932lap 12" Line Array Loudspeaker Kit Black

$19,497.00 $23,591.37

Jbl Line Array Speakers

$3,075.00 $3,966.75

Jbl Vrx932 Vrx918 Line Array Kit

$25,497.00 $40,030.29

Jbl Prx One Powered Column Array Pa Kit

$4,499.97 $7,064.95

Bose Ma12 Modular Line-array Loudspeaker White

$3,209.85 $5,135.76

Bose Ma12 Modular Line-array Loudspeaker Black

$3,209.85 $4,333.30

Bose Ma12ex Modular Line-array Loudspeaker White

$4,949.85 $6,236.81

Jbl Srx906la 6.5" Powered Line Array Loudspeaker

$6,687.00 $8,091.27

Jbl Srx910la Dual 10" Powered Line Array Speaker

$11,187.00 $14,990.58

Formatt Hitech 127mm Firecrest Nd Filter 1-stop

$1,047.48 $1,267.45

Products You May Like

Ashly Nxp8002 2-channel 800w Power Amplifier

$7,437.00 $9,073.14

Browning Strike Force Pro Dcl Trail Camera

$449.85 $701.77

Prox Flight Case With Rackspace For Rane One

$839.97 $1,217.96

Canon Pgi-72 Yellow Ink Tank

$42.00 $65.10

Lian Li O11d Evo Vertical Gpu Kit White

$224.97 $292.46

Panasonic Sqe1w 98" 4k Uhd Commercial Led Display

$37,026.00 $57,020.04

Hikvision Ds-7732ni-m4 32-channel 8k Nvr 24tb

$5,249.85 $6,299.82