Came-Tv Bowens Mount Ring Adapter Small

Came-tv Bowens Mount Ring Adapter Small | Seo Title

Product Code: eq38194
Availability: In Stock

$114.00 $140.22

Qty

9 reviews Write a review

Description
Reviews (9)

Mount a plethora of Bowens S-mount light modifiers to your Boltzen B-30 and F-55 LED Lights with this small CAME-TV Bowens Mount Ring Adapter Small | SEO Titlefrom CAME-TV. This is easily installed by removing the barndoors and Fresnel lens and screwing the adapter into place. Also, it features a screw to lock in any mounted accessories.

For Boltzen B-30 and F-55 Accepts Bowens Mount Accessories

Parameters
Mount	Bowens S
Packaging Info
Package Weight	0.63 lb
Box Dimensions (LxWxH)	6.3 x 5.7 x 1.65"

Related Questions and Answers

Q: 1. I'd like to use this to mount my Canon 6D with a fisheye VERTICALLY on the passenger door. Question: Will this mount allow my camera to be turned back to a horizontal position? (Really this involves the ball head too, but it'll have to be elevated off the legs to give the camera the space it needs). Thanks!

A: You will need to purchase additional accessories to mount your Canon 6D in a vertical position on this mount. You will need a Ball Head and depending on your set up you may benefit from having a Vertical L Bracket as well.

Q: 2. Is this the mount I need to connect the soft box to my Came-TV Boltzen 55w light?

A: Yes it is

Q: 3. When fully collapsed, how big is the kit when stored in the included bag? What are the dimensions? Could it easily fit in a small rollaboard suitcase? Thanks.

A: The kit size is W: 31.5 x H: 31.5" / W: 80.0 x H: 80.0 cm when collapsed.

Q: 4. Can this work as an attachment to the older Neewer C300 strobes to mount bowen based modifiers?

A: This was designed to modify Botzen 55 Fresnel lights to accept Bowens style modifiers. It will work with other Bowens S mount modifiers that use this mount.

Q: 5. Does this include the rosette yoke adapters?

A: This adapter does not include a set of rosette yoke adapters.

Q: 6. When using with a gimbal like the RS2 does t hevibration damping match up to a Cloud Mount or Kessler Killshock? It says "minimized vibration" but I can't tell where that is happening on this rig.

A: The center mount for the Video Sucker Suction Cup mount is connected to the legs by a double ended ball joint that helps isolate the mount from external vibrations. For something that is comparable to the mounts noted, I would recommend CAME-TV's GS10 Video Camera Stabilizer Arm (BH #CAGS10).

Q: 7. What material are the suction cups made from? I've seen many with plastic housing that break under stress.

A: The CAME-TV Video Sucker Suction Cup Mount is made from aluminum alloy.

Q: 8. Will this kit work with the Boltzen 55W lights right away or do I need to purchase the Bowens adapter for the light?

A: It comes ready with the bowens adapter.

Q: 9. Does this work perfectly like a new one?

A: The CAME-TV Video Sucker Suction Cup Mount is a solid suction cup mount system with a high payload of 110 lb. For any used variations of these products, please review the condition on the product webpage.

Q: 10. So to clarify , this has a Bowen’s mount but the led itself needs a screw on Bowen’s mount - the screw on I need to buy that separately?

A: If I understand your inquiry, if the LED light fixture you own has the Bowens S-mount to connect light modifiers to the light fixture, then no additional accessory needs to be purchased as the CAME-TV Foldable Quick Setup Softbox with Bowens Speed Ring (15.8 x 15.8") includes a Bowens S-mount speed ring with the purchase. This would all depend on the design of the LED light fixture you own (you would have to check its specifications). The Bowens S-mount is not a screw-on mount; it is a bayonet mount connection.

Dan	22/09/2024
[Bowens S] I've been using the CAME TV Mini V Mounts for a couple of years now and they have been rock solid. Pretty good for a Chinese brand I had never heard of. I mounted the CAME TV V Mount plate on my new FX6 and have shot with it half a dozen times now, it's been flawless. O use the Sprig cable management loops to contain the various VF, monitor and SDI feeds from my FX6 to on-board monitor, wireless transmitter and I used the 1/4 20s to mount the wireless transmitter. The best part is I can still run the stock battery to keep rolling when I do battery changes with the V Mounts, genius! Machining on the plate is top notch, it stays where I lock it into place as far as the tilt angle. Compared to the few other plates that will allow you to use a V mount and the stock battery, this CAME TV plate is by far the best value, some of the others cost more than double the money and aren't really much, if at all better. I highly recommend this plate AND the CAME TV Mini V Mount batteries, great, economical, high value combo. 5

John	29/07/2024
[0.63 lb] This adapter will suit my needs with a small modification. 5

William	13/07/2024
[0.63 lb] Bought this to do for a quick light setup for fill flash outdoors. Takes only a few minutes to have it opened and mounted ready to go. Break down is just as fast. Would recommend this quick setup. Will buy the larger ones once they are available. 5

Corey	19/06/2024
[0.63 lb] THIS DEFINITELY WILL TAKE YOUR FILMING TO THE NEXT LEVEL. WHEN I RECEIVED MY ORDER THE BALL HEAD WAS MISSING, BUT CUSTOMER SERVICE GOT A NEW ONE OUT TO ME QUICKLY. ALSO THIS DOESN'T COME WITH A STRAP TO SECURE IT TO THE CAR IN CASE THE SUCTION CUPS DO GIVE OUT. OTHER THAN THAT I LOVE IT 5

Erik	09/06/2024
[0.63 lb] If you purchase a CAME-TV 55W or the updated Q55w, this Bowens mount is a must have as it allows you to put soft boxes or other diffusion devices on the light head. However, note that the new Q55 series works best as it has a better system for tightening the tilt screws so a soft box stays where you put it. 5

Sanctus	03/06/2024
[0.63 lb] I've used this with a 10ft pole and 360 camera as well as my dslr and it holds on perfectly even drifting and at 150+ mph speeds. 5

Leslie	25/05/2024
[Bowens S] Got this because of the HIGH recommendation from a “ documentary filmmaker and working DP” and YouTuber who admits he absolutely works his gear into the ground, and these are the best V-mount batteries for his situation, because they are rugged and don’t require a charger. No charger to have to carry into the field means no charger to lose and repurchase, and no charger also means one more space in his pack for something else. Well, I can’t argue with that. This is my first V-Mount battery, so I can’t compare it to other V’s, but I’m glad I went this route. But to compare the construction of this battery to some L-Mount batteries I’ve gotten in the past, the quality of this V-mount is VERY high. The exterior is first rate quality: there is nothing cheap or flimsy about it. It charged up from 1/3 rd power (using B&H ‘s recommended Lenovo charger) in the space of an hour. I got it to power my beloved Colbor RGB 60 in the field, and it works like a champ. Now I don’t have to drag my Bluetti around to power my lights in the field, and instead use the Bluetti for what it was intended: recharging gear back at the car. I will absolutely be getting this V-mount again as I expand my kit. 5

Morton	07/05/2024
[Bowens S] Works as it should, lots of adjustments and the suckers are among the best I have used. Sticking to the plastic cover on roof top compartment of a Nissan Xterra 5