The white DD-BN2M 2 x 2 Wall-Mounted Bi-Directional Mic/Line Dante Interface from RDL is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN2M. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. The first switch enables or disables P48 phantom, second switch selects the mic or line gain range, and the third switch sets the gain. Each rear panel output provides a switch to set the output to balanced professional or unbalanced consumer level.

The DD-BN2M fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. It is PoE powered and is available with optional customized graphics.

The two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. 

The two Dante audio channels are converted to balanced line level on the rear panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit.

The rear panel outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN2M. AMS audio connectors include RCA, mini, and XLR jacks. The output plate may be located together with the DD-BN2M in a triple gang box or may be mounted remotely in a single box.

The valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN2M features discrete mic preamplifiers for studio-quality fidelity and low-noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated Decora front plates.

Suitable for demanding applications and networked audio systems

Dante network interface for two audio inputs and two audio outputs

Inputs on front panel XLR jacks and outputs on rear panel terminal block

Converts two standard mic or line audio sources to Dante network channels

Converts two Dante network audio signals to line level

Special software not required for module setup

Each input is switch selectable for mic or line

Switch-selectable mic gain: 40, 48, or 62 dB

Switch-selectable 48 V Mic Phantom (P48)

Switch-selectable line gain: Unity, 12, or 19 dB

Each output is switch selectable for balanced +4 dBu or unbalanced -10 dBV

24-bit analog to digital and digital to analog conversion

RDL analog filtering for improved audio performance

Made in the USA

Related Questions and Answers

Q: 1. Would this work with Yeti USB Microphones?

A: The Audinate Dante AVIO 2x2 USB Type-A I/O Adapter is used to connect a computer to a Dante network. The Yeti USB microphone needs to be connected directly to a computer's USB port. You cannot connect the mic directly to the Dante adapter, but you can connect the mic to your computer and then connect your computer to the adapter and connect the setup to a Dante network.

Q: 2. Hi Dan, does the headphone output of the RedNet X2P show up on the Dante network? or do i have to purchase the RedNet AM2?

A: You are correct, you need to purchase the Rednet AM2 for full control of the headphone out put on a Dante network. Thank you for shopping at B&H!

Q: 3. Can I use this with a USB-A to USB-C adapter to connect to a USB-C computer?

A: The Audinate Dante AVIO 2x2 USB Type-A I/O Adapter for Dante Audio Network uses USB 2.0, so no compatibility issues should arise when using it with a USB-A to USB-C adapter.

Q: 4. Is this comparable with an iPad that has USB-C?

A: Yes. iOS devices support class-compliant audio and the Audinate Dante AVIO 2x2 is compatible with devices that have class compliant USB.

Q: 5. Would this work with Yeti microphones?

A: This will not work with a Yeti mic. This is designed to allow a connected computer to send and receive audio over a Dante network.

Q: 6. Is the USB C Cable detachable?

A: The USB-C cable is removeable.

Q: 7. Current requirement for USB power source? 0.5A, 1A?

A: Audinate has not provided a spec for the amount of bus power used by the Dante AVIO 2x2 USB Type-A I/O Adapter for Dante Audio Network.

Q: 8. Is there a specific POE injector needed for this to work?

A: Dante AVIO adapters require a Power over Ethernet switch, or an 802.3af compliant PoE injector. Here is an option for a possible switch B&H # CISG35010K9, and injector BH #MIPD3501GAC.

Q: 9. Does this work with any operating system?

A: It is compatible for use with any Windows, Mac or Linux-based computer and no additional software is required.

Q: 10. I want to connect my old TD10 drum module with Macbook with Mojave OS and USB-C interface. Can I use this audio interface? Any other recommendation or experience?

A: This is compatible with current macbook models, for audio and midi interfacing. You will just need a USB A-USB C adapter, like our part number APMJ1M2AMA .