The Westcott Modern Damask Matte Vinyl Backdrop 5x7 Light Brownfrom Westcott Modern Damask Matte Vinyl Backdrop 5x7 Light Brownis a 5 x 7' backdrop with a printed light brown modern damask pattern. This size backdrop is suitable for full body shots, couples, and groups. It is easy to wipe down and clean if it gets wet or is spilled upon, which makes it an excellent choice when working with food or liquids.

The backdrop incorporates five grommets, three along the top and two along the bottom, and can be paired with Westcott's X-Drop frame (not included) for hanging. Additional grommets (not included) can be added if you wish to expand your hanging possibilities. The backdrop presents a matte finish, while the printed design lends a high-end look to your photographs. It ships to you rolled in a tube.

Matte Finish    Suitable for Food and Liquid Photography    5 x Integrated Grommets    Printed Modern Damask Pattern

This vinyl background features a modern damask pattern in light brown and has a matte finish

The vinyl surface is excellent for working with food and liquids and is easy to clean

The backdrop comes with three grommets along the top and two along the bottom

Large enough for full body shots, or small groups

Related Questions and Answers

Q: 1. Will this work with the Westcott 26 Rapid Box?

A: I love these, they're super light and compact. The'll work with the 26 Westcott Rapid Box with a speed light, but with that load it's certain to move about in the wind. You'll also need a sand bag to bring more weight to the base. I would still consider owning a second heavier stand for windy conditions or when an assistant is required to hold the stand not perpendicular to the ground and fully extended.

Q: 2. Does this unit have a 1/4 inch thread at the top?

A: Yes, but it is capped with an adapter that allows easy attachment of Tota Lights

Q: 3. What is the load for this stand?

A: Julia,Load limit is listed as 5.5 lbs.

Q: 4. Can I put a speed light on this?

A: Absolutely but you would need a shoe mount bracket with a cold shoe to mount a hot shoe speed light to the stand.

Q: 5. Does the f701 act as an audio interface when connected to a computer via USB?

A: There are two USB connectors on the Roland F701. One is connect a USB harddrive to record your performance as audio, the other will send MIDI info to you computer. Not Audio.

Q: 6. Would this be acceptable for a Apollo mega soft box to keep it close to the floor?

A: Mounting the Mega with an umbrella bracket on this stand would get you within 4 to 6 inches of the floor. For contact with the floor I would suggest the #7425, 7 foot stand. It has a large footprint for stability but reduces to a small height. Add weight to the base for stability if you want to use these stands at near their full extension.

Q: 7. Can I use it with an xplor600/ Neewer600ad? Is it sturdy ? Thanks

A: This stand has a rated capacity of 5 lb. The xplor600, with battery, weighs 5.9 lb. Personally, I would use a heavy duty light stand for the xplor600 (and still use sandbags). Like this one: https://a href= http://www.bhphotovideo.com/c/product/1274797-REG/impact_ls_96habi_9_5_heavy_duty_air.html target= _blank www.bhphotovideo.com/c/product/1274797-REG/impact_ls_96habi_9_5_heavy_duty_air.html/a

Q: 8. What is the REAL length of this strap, very end-to-very end? The 27.56" cannot be correct.

A: The compagnon The Strap (Black) has a total maximum adjustable length of 88.5": a leather strap that's 33.4" long with a 27.5" strap on each side of the leather strap, for a total of 88.5".

Q: 9. how do you remove the battery from an ice light 2? When they say push down is that perpendicular or parallel to the actual light? I can push either direction without any real movement?

A: Its intuitive. The operation is like removing the cover from a remote control. The difference is that the ice lights battery is a tight fit so press down on the body of the battery to relive the tennis on on the catch while lifting up the release catch.

Q: 10. Will this stand hold up a Wescott Ice Light?

A: The Ice Light will attach to the 1/4 -20 mounting on the top of the stand. To add tilting options I would suggest an adjustable shoe mount or tilter bracket.